http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
연소 반응기를 이용한 브롬 및 염소의 함량 측정에 관한 연구
최기인,권덕준,배성진,이동훈,Choi, Ki-In,Kwon, Duck-Jun,Bae, Sung-Jin,Lee, Dong-Hoon 한국결정성장학회 2011 韓國結晶成長學會誌 Vol.21 No.6
연소 반응기를 이용하여 고분자 물질에 함유된 할로겐 원소인 브롬과 염소를 정량하기 위한 조건을 연구하였다. 염소농도 측정의 경우, Mohr법이나 전위차 적정법을 이용한 경우가 산-염기 적정법을 이용한 경우보다 분석 데이터 간 편차가 낮게 나타났다. 또한, 연소 반응기에서 단계별로 포집한 용액에 대한 염소와 브롬 측정 결과, 두 원소 모두 증류수를 흡수액으로 사용할 때, 0.3 M NaOH 수용액을 사용할 때보다 더 높은 회수율을 보였으며, 흡수액/세척액에서의 농도가 가스상의 형태로 배출되는 농도에 비해 높은 것으로 나타났다. 한편, 브롬 함량을 측정할 때, 연소 반응기를 이용한 경우가 XRF나 연소-이온크로마토그래피를 이용한 경우에 비해 농도가 상대적으로 낮게 평가되는 것으로 나타났다. In this study, we investigated the analytical methods for bromine (Br) and chloride (Cl) with oxygen combustion bomb, using a halogen-containing polymer materials. On measuring Cl content, it showed less reproducibility of the results applying Mohr method or potentiometric titration method than those applying acid-base titration method. In both Br and Cl tests with an oxygen combustion bomb, their concentrations in the absorption and cleaning solution with distilled water were much higher than those in the combustion gas. On the other hand, the concentration level of Br measured by the oxygen combustion bomb method were a little bit lower than those measured by XRF or combustionion chromatography.
최기인(Choi, Ki-In) 한국산학기술학회 2010 한국산학기술학회논문지 Vol.11 No.12
군수제품 생산업체 및 조달업체를 대상으로 국방규격 및 인용표준·규격에 대한 활용실태와 내용에 대한 유 효화(최신화) 확인 방식에 대한 설문조사를 실시하였다. 각 업체별로 보유 또는 활용하고 있는 표준·규격 수를 살펴 보면, KS, 국방규격, 미국 군사규격의 순으로 많이 보유하였으며, KS 구입을 위해서는 연간 40만원을, 해외 표준·규 격 구입을 위해서 연간 133만원을 지불하는 것으로 조사되었다. 한편, 해외 표준·규격은 언어적인 문제, 정보 접근 방식의 모호성, 표준 관련기관의 부재 등으로 인해 KS나 국방규격에 비해 상대적으로 수동적으로 최신 정보를 얻고 있었다. 또한, 설문대상 업체에서는 국방규격 정비(인용규격 최신화 및 KS 부합화) 및 관련 DB 검색 서비스 제공에 대한 요구도가 매우 높아, 보다 효과적인 국방규격 통합 관리시스템 마련이 시급한 것으로 조사되었다. Based on the survey for munitions companies, we have tried to find current state of the application of Korean military specifications(KDS) and their references for munition products, and how they can be improved for a better management system. On average, Korean munitions companies have 660 of KS, 18 of U.S. military specifications, and 5 of foreign standards, and annually spend about 0.4 million won for KS, but 1.3 million won for foreign standards. In addition, they have emphasized the necessity of the integrated management system for KDS and the related drawings.
최기인(Choi, Ki-In),박일광(Park, Il-Gwang),김성광(Kim, Sung-Kwang) 한국산학기술학회 2011 한국산학기술학회논문지 Vol.12 No.4
150개 군수업체를 대상으로 실시한 설문조사를 통해, 국방규격 및 민간표준 규격에 대한 활용 실태와 국방규 격의 KS 부합화에 따른 경제적 효과 분석을 수행하였다. 대부분의 업체에서는 기업에서 활용하는 국방규격이나 인용 규격의 최신 변경사항에 대한 충분한 정보를 얻지 못하는 것으로 나타났다. 특히, 국방규격은 정보에 대한 접근 제한 성으로 인해 최신 동향을 파악하기가 어렵다는 응답이 많았는데, 이는 국방규격이나 도면 검색 프로그램에 대한 활용 을 통해 다소나마 해결될 것으로 판단된다. 국방규격의 KS 부합화 사업에 대해서는 많은 업체에서 품질향상, 연구 개발기간 단축, 생산성 증대, 표준 구매 및 교육 비용 절감 등과 관련하여 군수품 원가 절감에 다각적으로 기여할 것으로 예상하는 것으로 나타났다. To understand current status for the utilization of Korean military specifications(KDS) and other standards/specifications in munitions companies, we have surveyed 150 companies mainly related with electrical and electronic industry. Most of the companies have expected that the harmonization of KDS and KS would bring a positive effect on their business, especially from the point of quality control, productivity increase, the reduction of expenditure for standard management and so on. This survey result will help to build more user-friendly management system for KDS as well as KS.
최기인(Choi, Ki-In) 한국산학기술학회 2012 한국산학기술학회논문지 Vol.13 No.12
현재 산업체에서 그 수요가 늘어나고 있는 3차원 제품 모델과 관련하여 군에서의 3차원 모델 활성화 방안을 연구하였다. 우리 군은 전통적으로 기계분야 중심의 제조업이 활성화되어 있어 기본적으로 2차원 도면을 기반으로 한 제품 설계가 주를 이루고 있으며, 이에 관련 지침 또한 2차원 도면 형태의 자료에 대해서만 규정하고 있다. 따라서 본 연구에서는 ‘국방규격 서식 및 작성에 관한 지침’으로 대표되는 현재 우리 군에서의 기술자료 관리 지침을 분석하 고, 제품의 수명주기관리(Product Lifecycle Management) 관점에서 우리 군에서의 3D 제품모델 활성화를 위한 방안을 모색하고자 하였다. To expand the use of three dimensional(3D) product modelling in the army, we have analyzed military technical data management system, as well as the military guidelines for the unique format and content of technical data package. Because traditional munition sector is based on the machinery and equipment industry, they have usually applied two dimensional(2D) drawings to prepare a design and to make a product. For that reason, there is no provision for 3D product modelling as a technical data package in the military guideline. In this study, we proposed an improvement scheme for the vitalization of 3D product modelling in the army not only in terms of related guideline but also military technical data management system.
이재인(Jae In LEE),이태규(Tai Gyu LEE),최기인(Ki In CHOI),엄희정(Hui Jeong EOM),권덕준(Deok Jun KWEON),최철호(Zel Ho CHOI) 한국생태공학회 2012 한국생태공학회지 Vol.3 No.1
This study presents a method for the quantitative analysis of residual musk xylene in product samples. Toluene, acetonitrile, hexane, acetone, and methanol were tested for the solvent selection with artificial samples made from paper filter and glass filter. Musk xylene dissolves most often through soxhlet extraction of toluene over six hours. Both GC/MS and GC/ECD showed relative low detection limit for musk xylene. Based on the results of round robin test with seven laboratories, it seems valid the extraction and analysis method of musk xylene proposed in this study.
김선택(Sun Teak KIM),최기인(Ki In CHOI),이재인(Jae In LEE),임다혜(Da Hye LIM),최철호(Zel Ho CHOI),구상만(Sang Man KOO) 한국생태공학회 2014 한국생태공학회지 Vol.4 No.1
PVC is one of the common thermoplastic polymers well mixed up with other plasticizer, stabilizer, and additive agent. It is also a highly energy efficient material widely used in many industries related with vehicles, accessories, furniture, packaging, pipes, wallpaper, wire coating, and so on. Since it has been reported that VCM, the raw material of PVC, could be related with high of bio-carcinogenicity in human, however, the level of residual VCM not only in the polymer resins but also in the environment have been regulated in many countries. There are several testing methods for the determination of residual VCM in the polymer resins as well as environment samples, including those by ISO, ASTM, EPA, KS, and other governmental guidelines. However, it is still difficult to measure residual VCM because of its high vapor pressure. No suitable commercial reference material for VCM is another problem. To establish and develop more reliable test method for residual VCM, this paper introduces several typical standard methods for residual VCM testing in Korea and other countries.
이명규(Myung Gyu LEE),김선택(Sun teak KIM),김현구(Hyun Goo KIM),안욱성(Wook Sung AHN),최기인(Ki In CHOI),최철호(Zel Ho CHOI),구상만(Sang Man Koo),서인숙(In Sook SEO) 한국생태공학회 2014 한국생태공학회지 Vol.4 No.1
This study was performed to investigate background levels of barium (Ba), chromium (Cr) in Korean geological units. Also, the BCR sequential extraction method was conducted to identify chemical distribution of those compounds in Korean geological units and the simple bioavailability extraction test (SBET) was conducted to evaluate bioaccessibility. The soil samples taken from 17 sites were analyzed to survey background levels. The average concentrations and ranges for metals are as follows; Ba: 74.20 (23.25 ~ 171.28), Cr: 26.48 (6.74 ~ 75.89) mg/kg. The BCR sequential extraction method was conducted to identify chemical distributional existence of 2 elements of soils from each geological unit. Cr in soils mainly exist as residual form. However, in case of Ba, ion exchangeble and reducible form were relatively high compared with other metals. SBET bioaccessibility of metals were in the order of Ba (47.6%), Cr (0.8%). The results of speciations, and bioaccessibilities of metals in this study can be used to provide a fundamental data to set soil pollution standards and to evaluate the soil contamination level.