http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이재인(Jae In LEE),이태규(Tai Gyu LEE),최기인(Ki In CHOI),엄희정(Hui Jeong EOM),권덕준(Deok Jun KWEON),최철호(Zel Ho CHOI) 한국생태공학회 2012 한국생태공학회지 Vol.3 No.1
This study presents a method for the quantitative analysis of residual musk xylene in product samples. Toluene, acetonitrile, hexane, acetone, and methanol were tested for the solvent selection with artificial samples made from paper filter and glass filter. Musk xylene dissolves most often through soxhlet extraction of toluene over six hours. Both GC/MS and GC/ECD showed relative low detection limit for musk xylene. Based on the results of round robin test with seven laboratories, it seems valid the extraction and analysis method of musk xylene proposed in this study.
김재현(Jae Hyeon Kim),이우석(Woo Seok Lee),이태규(Tai Gyu Lee) 유기성자원학회 2022 유기성자원학회 학술발표대회논문집 Vol.2022 No.추계
석유화학 산업이란 석유제품 또는 천연가스를 원료로 합성수지, 합성섬유 원료, 합성 고무 등각종 기초화학 제품을 생산하는 산업이다. 석유화학 제품은 생활 밀착형 산업으로 자리 잡음과 동시에 일반 소비재로 폭넓게 사용되어왔다. 이러한 석유화학산업은 많은 양의 원료와 에너지를 투입하여 석유제품을 생산하기 때문에 관리를 효율적으로 수행하지 못하는 경우 다양한 요소의 환경문제를유발하고 오염물질을 배출하게 된다. 때문에 석유화학 산업에서는 에너지 및 원료 소비로 인한 대기오염 물질 배출, 원유 정제 과정에서 비산 되거나 굴뚝에서 배출되는 특정 대기 유해 물질, 공업용수사용으로 인한 폐수 배출, 다량의 폐촉매에 기인한 폐기물 관리 분야 등의 환경문제를 고려해야 한다. 따라서 석유화학산업 공정 특성을 분석하고 밸류 체인(Value Chain)에 따른 각 공정에서 발생하는 오염물질의 배출과 특성 조사를 실시하여 석유화학 업종의 BAT 적용에 기여할 수 있도록 연구를실시하였다.
튜브 전기로를 이용한 TiO₂ 나노입자의 합성 및 특성 분석
배귀남,현정은,이태규,정종수 한국대기환경학회 2004 한국대기환경학회지 Vol.20 No.3
Titania particles are widely used as a photocatalyst to treat various contaminants in air and water. Titania particles were formed by vapor-phase oxidation of titanium tetraisopropoxide (TTIP) in a tube furnace between 773 and 1,273 K. The effect of process variables such as furnace temperature. flow rate of carrier air. and flow rate of sheath air on powder size and phase characteristics was investigated using a scanning mobility particle sizer (SMPS), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The size distribution of synthesized titania particles was characterized with mode diameter and peak concentration. The mode diameter ranging from 20 to 80 nm decreased with increasing flow rates of sheath air and carrier air, and increased with increasing furnace temperature. The peak concentration increased with increasing flow rates of sheath air and carrier air. The best synthetic condition for high production rate can be derived from the experimental data set represented by mode diameter and peak concentration. The crystal structure of synthesized titania particles was found to be anatase phase, ensuring high photocatalytic potential.