http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
그래핀 옥사이드와 이산화티타늄 조합을 이용한 이산화탄소의 광환원
이명규 ( Myung Kyu Lee ),장준원 ( Jun Won Jang ),박성직 ( Sung Jik Park ),박재우 ( Jae Woo Park ) 한국물환경학회 2016 한국물환경학회지 Vol.32 No.1
In this study, we synthesized a combination of graphene oxide (GO) and titanium dioxide (TiO2) and confirm that GO can be used for CO2 photoreduction. TiO2 exhibited highly efficient combination with other conventional electric charges generated by these paration phenomenon for suppression of hole-electron recombination. This improved the efficiency of CO2 photoreduction. The synthetic form of GO-TiO2 used in this study was agraphene sheet surrounded by TiO2 powder. Efficiency and stability were enhanced by combination of GO and TiO2. In a CO2 photoreduction experiment, the highest CO conversion rate was 0.652 μmol/g·h in GO10-TiO2 (2.3-fold that of pure TiO2) and the highest CH4 production rate was 0.037 μmol/g·h in GO0.1-TiO2 (2.4-fold that of pure TiO2). GO enhances photocatalytic efficiency by functioning as a support and absorbent, and enabling charge separation. With increasing GO concentration, the CH4 level decreases to~45% due to decreased transfer of electrons. In this study, TiO2 together with GO yielded a different result than the normal doping effect and selective CO2 photoreduction.
적분관측기를 이용한 선형시스템의 미지입력추정에 관한 연구
이명규(Myung-Kyu Lee) 한국조명·전기설비학회 2008 조명·전기설비학회논문지 Vol.22 No.2
본 논문에서는 측정 잡음이 존재하는 선형시스템의 미지 입력 추정에 관하여 기술하였다. 적분관측기를 기초로 한 본 연구의 방법은 미지 입력을 정확히 추정해낼 수 있을 뿐만 아니라 추정 성능도 높일 수 있다. 시뮬레이션 결과와 기존 방법의 비교를 통해 본 연구 방법의 유용성을 입증할 수 있었다. This paper deals with the unknown input estimation for linear dynamic systems with sensor noise. The presented method based on the integral observer permits to achieve good convergence and exact estimation of unknown inputs. The validity of proposed method is established by comparison with simulation results and the existing methods.
이명규(Myung-Kyu Lee),박설현(Seul-Hyun Park) 한국화재소방학회 2021 한국화재소방학회논문지 Vol.35 No.6
화재 발생 시 열방출율은 가연물의 열분해율과 유효 연소열의 상관관계에 의해서 결정된다. 가연물의 열분해율을정확하게 결정하기 위해서는 반응열(heat of reaction)에 대한 이해가 중요하다. 하지만 목재와 같이 연소과정에서 탄화가 발생되는 경우 다단계 열분해 반응을 거치기 때문에 반응열을 정확하기 측정하기 어렵다. 본 연구에서는 가연물의 반응열 차이와 탄화도의 비율이 연소 시 발생하는 열방출율에 어떠한 영향을 미치는지 알아보기 위해 ISO5660-1 콘칼로리미터 실험을 수행하여 열방출율 측정하였고 fire dynamics simulator (FDS) 전산 해석을 통해 계산된값과 비교·분석하였다. 가연물로는 수분을 제거한 소나무과 상록수인 douglas-fir를 사용하였다. 콘칼로리미터 실험과FDS전산해석 결과를 바탕으로 반응열과 탄화도의 증가가 열방출율 감소와 직접적인 상관관계가 있음을 확인하였다. The heat release rate (HRR) of fires can be determined from the relationship between the thermal pyrolysis rate ofcombustibles and the effective heat of combustion. To accurately determine the thermal pyrolysis rate of combustibles, itis important to understand the heat of reaction of combustibles. However, this parameter is difficult to measure forcombustibles, such as wood, that produce charring during combustion because they undergo a multi-step pyrolysis reaction. In this study, the ISO 5660-1 standard method was used to perform cone calorimetry experiments to understand how theHRR is affected by the heat of reaction heat and charring properties of combustibles. To this end, the HRR calculated usingFDS computational analysis was compared to the measured value from the ISO 5660-1 cone calorimetry experiments. Adehydrated Douglas-fir, an evergreen tree of the pine family, was used as a combustible material. The cone calorimetryexperiment and FDS computational analysis results confirmed that increases in the heat of reaction and charring propertieswere directly correlated with the decrease in the HRR.