http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김구환 ( Kim Goo-hwan ),김규용 ( Kim Gyu-yong ),이상규 ( Lee Sang-kyu ),황의철 ( Hwang Eui-chul ),김경태 ( Kim Gyeong-tae ),남정수 ( Nam Jeong-soo ) 한국건축시공학회 2018 한국건축시공학회 학술발표대회 논문집 Vol.18 No.2
As a result of measuring the compressive strength and semi-adiabatic temperature rise of the mixed mortar, it was confirmed that the mortar mixed with the hydration heat reducing material is effective. On the other hand, the compressive strength showed similar strength to that of moderate heat Portland cement until the age 7 days, but after that, the tendency of the strength development to be delayed was confirmed.
금속-산화막 반도체 전계효과 트랜지스터의 우주방사선에 의한 총이온화선량 시험을 위한 테스트 베드
신구환(Goo-Hwan Shin),유광선(Kwang-Sun Ryu),정성인(Sung-In Chung),강경인(Kyung-In Kang),김형명(Hyung-Myung Kim) 한국항공우주학회 2006 韓國航空宇宙學會誌 Vol.34 No.11
최근에 인공위성용 전자소자는 우주방사선에 좀 더 강한 소자를 요구되어진다. 왜냐하면, 인공위성의 수명과 기능은 우주방사선으로부터 영향을 받기 때문이다. 또한, 과거에는 부품단위의 우주방사선 시험을 수행하지 않고 유닛 또는 서브시스템 단위의 우주방사선 시험을 수행하였다. 게다가, 발사된 인공위성이 작동오류 상태에 있을 때 그 이유를 분석하기에는 그다지 쉬운 일은 아니다. 따라서, 발사 전 부품 단위 우주방사선 시험을 수행하여 주요 소자에 대한 우주방사선에 의한 영향을 분석 할 필요가 있으며, 지상에서 데이터를 확보할 필요가 있다. 그러므로, 본 논문에서는 모든 전자소자의 기본이라 할 수 있는 금속-산화막 반도체 전계효과 트랜지스터의 총이온화선량에 대한 영향 시험을 수행하기 위한 테스트 베드를 제안한다. Recently, all the electrical parts for sateIJite application are required more strong against cosmic rays, because spacecraft's life time and function are depending on the their conditions. Also, a TID effect test was undertaken with units and/or subsystems which are already assembled on the PCB in past time. However, it is very hard to know and analyze that some abnormal states are appeared after launch. Moreover, it is necessary to perform a test of TID effects based on the parts level for preparing preliminary data in cosmic rays. Therefore, this paper presents a test-bed to perform a TID effect test of Metal-Oxide Semiconductor Field Effect Transistor (MOSFET) which is a fundamental element for electronics.
김구환,권강범,류도곤,Kim, Goo-Hwan,Kwon, Kang-Beom,Ryu, Do-Gon 대한동의생리학회 2007 동의생리병리학회지 Vol.21 No.4
Shenming(神明) exists everywhere in the universe; it affects human beings to feel and contact ideal and peaceful state of Shen(神). Shenming theory(神明思想) in ${\ulcorner}$Hwang Ti Nei Ching${\lrcorner}$ (黃帝內經) was established by ancient Northeastern Asians who were trying to apply paradigm called TianRenHeYi theory(天人合-思想), unifying man and the Great Spirit(絶對精神) of the universe. Based on present, Shenming(神明) is an idea that can estimate will of Shen(神) which has a key to the future; such concept is founded by both human's mind and action that are designed to seek for the uncertain future. Very pure and devoted mind can sympathize with Shen(神) to accept Shenming(神明). Sehnming theory(神明思想) in ${\ulcorner}$Hwang Ti Nei Ching${\lrcorner}$ (黃帝內經) has a basic concept of living balanced life as a human by accepting Shenming(神明), the Spirit of Universe. Thus, it can be summarized into a phrase, 'Shenming(神明) is a process that human conjures his ultimate destiny called the Great Spirit(絶對精神) in himself.' If a man would be guided by Shenming(神明), the Spirit of Universe, he can live peacefully. Therefore, it is essential to study Shenming theory(神明思想) in ${\ulcorner}$Hwang Ti Nei Ching${\lrcorner}$ (黃帝內經) to aid present people's mental health.
리튬이온 전지 기술을 채용한 인공위성용 전력계 개념 설계
신구환(Goo-Hwan Shin),박경화(Kyung-Hwa Park),김형명(Hyung-Myung Kim),임종태(Jong-Tae Lim) 한국항공우주학회 2007 韓國航空宇宙學會誌 Vol.35 No.2
본 논문은 리튬이온 (Li-ion) 셀을 채용한 인공위성용 전력계의 개념 설계에 대하여 기술한다. 기존의 니켈카드뮴 (NiCd) 셀과 비교할 때, 리튬이온 (Li-ion) 셀은 에너지 밀도, 무게 그리고 부피에서 큰 잇점을 갖고 있다. 니켈카드뮴 (NiCd) 셀의 평균 출력전압은 +1.2V이며, 리튬이온 (Li-ion) 셀의 출력전압은 +3.6V이다. 그러나, 리튬이온 (Li-ion) 셀의 충전과 방전에 있어서의 절차는 기존의 니켈카드뮴 (NiCd) 셀 보다는 어렵다. 따라서, 리튬이온 (Li-ion) 셀의 충전과 방전 시에는 각각의 셀에 대하여 충전 전압과 방전 전압을 검침하고 제어를 해주어야 하므로 별도의 제어 회로가 요구된다. 따라서, 본 논문을 통하여 리튬이온 (Li-ion) 셀을 채용한 전력계의 설계 시 고려하여야 할 사항 및 리튬이온 (Li-ion) 셀의 충ㆍ방전 특성에 대한 연구 결과를 제시하고자 한다. This paper presents the conceptual design of the electrical power system using Li-ion cell technology for a satellite application. Compared to a conventional NiCd cell, a Li-ion cell has a lot of advantages such as an energy density, mass and a volume. Normally, a Li-ion cell has three times than conventional NiCd cells in a capacity such as a cell voltage. The normal voltage of a NiCd cell is around +1.2V and a Li-ion cell could be in +3.6V. However, the handling procedure for a Li-ion cell in charge and discharge might be difficult than a conventional NiCd cell, which means that the charge and discharge of each cell should be monitored and controlled by electrical circuits to prevent an over-charge and over-discharge. Therefore, in this paper we propose the design consideration and the characteristics of a Li-ion cell during charging and discharging battery packs in the point of view of electrical power system.