http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유한요소법을 이용한 임플란트 경부 디자인이 골응력에 미치는 영향 분석
김경탁,조광헌,이청희,유원재,이규복,Kim, Kyung-Tak,Jo, Kwang-Heon,Lee, Cheong-Hee,Yu, Won-Jae,Lee, Kyu-Bok 대한치과보철학회 2009 대한치과보철학회지 Vol.47 No.4
연구목적: 임플란트 경부 디자인의 차이가 경부 치밀골의 응력분포에 미치는 영향을 유한요소법을 이용하여 분석하고자 한다. 연구재료 및 방법: 몸체 형상은 유사 (직경 4.3 mm, 길이 10 mm)하나 경부 디자인이 internal형, external형, 및 submerged형으로 다른 3종의 임플란트 시스템 ((주)덴티스, 대구, 대한민국)에 대하여 축대칭 유한요소모델을 사용하여 해석하였다. 악골 폭경은 7 mm로 동일하게 모델링하였고 하중 조건으로는 임플란트 장축에 평행한 수직하중 50 N, 임플란트 장축에 $45^{\circ}$방향으로 작용하는 경사력 50N을 설정하였다. 결과: 해석한 3종의 임플란트 모두 경부 피질골에 응력집중을 발생시켰으며 디자인 차이에 따른 응력 수준의 차이가 관찰되었다. 경부 피질골의 최대 응력은 수직력 조건에서 internal형, submerged형, external형의 순으로 컸으며, 그 값은 각각 2.71, 2.60, 2.48 MPa였다. 경사력 조건에서는 internal형, external형, submerged형의 순으로 컸으며 그 값은 각각 9.30, 9.14, 8.97 MPa였다. 결론: 임플란트 경부 디자인이 주위 치밀골의 응력 분포에 영향을 미칠 수 있지만 그 차이는 크지 않은 것으로 분석되었다. Statement of problem: High stress concentration on the crestal cortical bone has been regraded as a major etiologic factor jeopardizing long term stability of endosseous implants. Purpose: To investigate if the design characteristics of crestal module, i.e. internal type, external type, and submerged type, affect stress distribution on the crestal cortical bone. Material and methods: A cylindrical shaped implant, 4.3 mm in diameter and 10 mm in length, with 3 different crestal modules, i.e. internal type, external type, and submerged type, were analysed. An axisymmetric scheme was used for finite elment formulation. A vertical load of 50 N and an oblique load of 50N acting at $45^{\circ}$ with the implant's long axis was applied. The peak crestal bone stress acting at the intersection of implant and crestal bone was compared. Results: Under vertical load, the crestal bone stress was high in the order of internal, external, and submerged types. Under the oblique loading condition, it was in the order of internal, submerged, and external types. Conclusion: Crestal module design was found to affect the level of the crestal bone stresses although the actual amount was not significant.
김경탁(Kyung-Tak Kim),김도현(Do-Hyeun Kim) 한국멀티미디어학회 2009 한국멀티미디어학회 학술발표논문집 Vol.2009 No.2
최근 센서 네트워크로부터 수집되는 실시간 상황 데이터를 지도 상에서 도시하기 위한 연구가 OGC(Open Geospatial Consortium)을 중심으로 진행되고 있다. 그러나 아직 센서 네트워크와 더불어 공존하는 구동체 네트워크의 정보와 제어 상황을 도시하는 가시화 연구는 미흡하다. 따라서 본 논문에서는 이동 및 고정 구동체를 지도상에서 실시간적으로 수동이나 자동으로 제어할 수 있는 가시화 방안을 제시한다. 이를 통해 구동체에 제어 명령을 전달하고, 현재 구동체 상태를 실시간으로 모니터링할 수 있다.
WMS와 RADARSAT SAR 영상을 이용한 유역 침수구역 분석
김경탁 ( Kyung Tak Kim ),김주훈 ( Joo Hun Kim ),박정술 ( Jung Sool Park ),변인경 ( In Kyung Byun ) 한국지리정보학회 2007 한국지리정보학회지 Vol.10 No.3
본 연구는 수문 및 수리학적 모형을 이용하여 유역내 하천의 월류에 의한 침수구역을 분석하고, SAR 위성영상을 이용하여 내수배제 불량에 의한 제내지 침수구역을 추출한 후 이를 현지조사를 바탕으로 제작된 침수실적도와 비교하여 SAR 위성영상 자료의 활용성을 검토하는 것을 목적으로 하였다. 연구지역은 삽교천 국가하천 구간이며 홍수사상은 1999년 8월 2일~5일 기간에 발생한 홍수를 대상으로 하였다. 연구방법은 HEC-RAS의 홍수사상을 적용하여 홍수위를 분석하였으며 분석된 홍수위 자료를 WMS에서 TIN자료와 분석하여 제내지 침수구역을 추출하고 기존 WAMIS의 침수실적도와 비교하였다. SAR 영상에 의한 침수구역 추출은 침수시기인 1999년 8월 4일의 영상과 침수 후 영상인 2002년 9월 8일의 영상을 칼라합성하여 추출하였으며 이와 같이 추출된 침수구역을 WAMIS의 침수실적도와 비교하였다. 연구결과 수리학적 모형에 의한 침수구역 추출은 외수범람에 의한 침수구역을 추출하는 데는 이용이 가능하나 내수배제 불량에 대한 침수구역 추출에는 한계가 있었다. SAR 위성영상에 의한 침수구역 추출 방법은 수리학적 모형에서 나타난 내수배제불량에 의한 침수구역 산정에 대한 한계를 보완할 수 있으나 첨두유출 발생시점의 영상 확보 여부가 침수구역 산정의 정확성을 결정짓는 것으로 나타났다. This study was conducted in order to analyze a flooded area by the overflow of a stream using hydrological and hydraulic models and to estimate the utility of the SAR satellite image by comparing a protected lowland inundation area with a past inundation area map. The research area selected for this study is Sapkyocheon, which was flooded in August 1999. The flood stage was analyzed to select an inundation area by applying flood events in August 1999. By importing analyzed flood stage data into TIN data of WMS, the inundation area of a protected lowland was selected and then compared with an flood hazard map of WAMIS. An inundation area is selected by the SAR satellite image in comparing the image of August 4, 1999 (inundation time) with the image of September 8, 2002 (after inundation). The method of selecting an inundation area with the hydraulic model of HEC-RAS can be used to select an inundation area of external overflow, but it has the limit of selecting an inundation area concerning the internal drainage. The method of using the SAR satellite image can complement the limit of an inundation area of an internal drainage but accuracy of inundation area depends on using SAR satellite image acquired at time of maximum depth.