http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
표면 플라즈몬 공명 신호의 증폭을 위한 새로운 금 콜로이드 센서칩 제조와 특성 연구
임정혁,이경호,고광락,강신원,김재호 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1
New gold colloidal film sensor chips were employed to enhance the sensitivity of the Surface Plasmon Resonce (SPR). Au collodal solutions were synthesized, and Au colloidal films were fabricated by immobilization of colloid on vacuum deposited Au film through the coupling agent of 1,8-diaminooctane. Specific interaction of human IgG antibody to human antigen was monitored by in situ SPR measurement from both a smooth and a Au colloidal films. Au colloidal film sensor chips resulted in 27 % enhancements effect for the same reaction on SPR angle shifts compared to a smooth Au film.
골수강내 금속정 및 나사못 맞물림을 이용한 경골의 치료
최창혁,권굉우,김신근,이상욱,강창진 대구효성카톨릭대학교 1997 연구논문집 Vol.56 No.2
Fracture of the tibial shaft is the most common among the long bone fractures, and it is difficult to treat because of a high incidence of delayed union, nonunion and malunion. Interlocking Intramedullary mailing is considered to be valuable method in treating long bone fracture such as tibial fracture these days because it enables rigid fixation, early joint motion exercise and weight bearing. Between April 1993 and March 1997, we treated 63 cases of tibia fractures with interlocking intramedullary nailing. The results were as follows: 1. Among the 63 cases, 51 cases were closed fractures and 12 cases were open fractures. 2. Static interlocking nailing was done in all cases and dynamization was done in 7 cases in postoperative 13 weeks. 3. Average union time was 19.9 weeks, 19 weeks with closed tibia fracture and 2.4 weeks with open tibia fracture. According to fracture site, 22 weeks with proximal tibia fracture, 19.2 weeks with mid-tibia fracture and 21.4 weeks with distal tibia fracture. According to the Winquist-Hansen classification, Type I was 19.8 weeks, Type Ⅱ was 20.4 weeks, Type Ⅲ was 22 weeks and Type Ⅳ was 26 weeks. 4. Weight bearing was started at the time of subsidence of pain and tenderness of the fracture site, 11.5 weeks with closed fracture and 12.3 weeks with open fracture. 5. According to the functional result of Klemm and Borner, 44 cases were excellent, 9 cases were good, 7 cases were fair and 3 cases were poor.
Kang, Min Ah,Kyu Sik Yoon,Hye Ri Kwon,Min Woo Park,Shin Hyuk Jo,Shin Hyo Seob,Sae Hee Kim,Eun Jin Kang,Mi Ja Seo,Yong Man Yu,Young Nam Youn 한국응용곤충학회 2010 한국응용곤충학회 학술대회논문집 Vol.2010 No.10
Pyrifluquinazon, as a quinazinalone chemical group, based on a new mode of biological activity. It is reported that mode of action is modifies insect behavior, rapidly stopping feeding such that insects starve to death. Time-release feature and mortality effect on M. persicae using different pyrifluquinazon nano type and non-nano type were compared. Pyrifluquinazon nano type was formulated with different molecular weight and density of used chitosan (CS 30000 0.1% and CS 3000 0.3%). In the CS 30,000 0.1%, the mortality was weakly occurred at early time, but steadily increased after 4days. Finally, we confirmed more than 70% mortality as a peak at 16days. In CS 3000 0.3%, the mortality showed about 70% until 18days as a effective controlled release. Also, We examine time-release feature and mortality effect on M. persicae according to the different pyrifluquinazon nano type(CS 30000 0.1% and CS 3000 0.3%) of concentrations. The CS 30000 0.1% bioassay results of different concentration were showed that the highest concentration(100ppm) was measured better mortality than other concentration at 0 day, but cannot confirm different effect about dissimilar concentration. However, increasing rates of M. persicae were low as treatment concentrate was high. In CS 3000 0.3% 100ppm concentration bioassay result, aphid mortality reached peak at 24 days and increasing rate also low. Additionally, for the comparing of bioassay and feeding behavior of M. persicae against pyrifluquinazon nano types and non-nano type, EPG technique was carried out. In case of non nano type, feeding inhibition efficacy was showed during 4 days after treatment, but appeared similar level with control after 10days. In CS 3000 0.3% 50ppm, residual efficacy was specially showed until 28days after treatment whereas treatments with CS 30000 0.1% were similar to the control after 22days. These result show that the change of feedinng behavior and motrality of M. persicae is correlated with the change of nano type or non nano type of pyrifluquinazon.
Kang, Byoung-Ho,Seo, Jun-Seon,Jeong, Sohee,Lee, Jihye,Han, Chang-Soo,Kim, Do-Eok,Kim, Kyu-Jin,Yeom, Se-Hyuk,Kwon, Dae-Hyuk,Kim, Hak-Rin,Kang, Shin-Won The Optical Society 2010 Optics express Vol.18 No.17
<P>We propose a highly efficient hybrid light-emitting device (LED) with a single active layer where CdSe/ZnS quantum dots (QDs) are dispersed as a guest material in a conjugated polymer (co-polymer) matrix used for a host material. In our structure, the QDs act on light-emitting chromophores by trapping the migrating excitons in the co-polymer matrix via F?rster energy transfer, and improve the charge balance within the co-polymer by trapping the injected electron carriers. Experimental results show that the electroluminescent properties highly depend on the doping density of the QDs within the co-polymer matrix, where the luminance as well as the external current efficiency are initially enhanced with increasing the concentration of the dispersed QDs in the co-polymer solution, and then such properties are degraded due to aggregation of the QDs. We can get the maximum brightness of 9,088 cd/m(2) and the maximum external current efficiency of 7.5 cd/A in mixing ratio of the QDs by 1.0 wt%. The external current efficiency is enhanced by over 15 times and the turn-on voltage is reduced in comparison with the corresponding values for a reference device that uses only a co-polymer as an active layer.</P>