http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
심정욱,임형우,차귀수,Sim, Jung-Wook,Lim, Hyoung-Woo,Cha, Guee-Soo 한국초전도저온공학회 2000 한국초전도저온공학회논문지 Vol.2 No.2
The high temperature superconducting bulk can be used as the rotor of an ac motor. This paper presents the fabrication and test results of a ac motor with HTS bulk rotor. The rotor of a conventional squirrel cage induction motor was replaced with cylinder type YBCO bulk. Height and outer diameter of the HTS bulk was 15mm and 46mm, respectively. Eddy current brake using aluminium disk was used to measure the torque of the HTS motor. No load test, locked rotor test and load test were performed to examine the characteristics of the HTS motor. Test results show the motor can rotate at synchronous speed without any special starting circuit. Maximum output power of the constructed HTS motor was 408W.
도시형자기부상철도 부상장치의 기술기준 및 시험규격 개발 고도화 연구
심정욱(Jung Wook Sim),김상헌(Sang Hun Kim),박진규(Jin Kyu Park),박찬경(Chan Kyung Park) 한국철도학회 2015 한국철도학회 학술발표대회논문집 Vol.2015 No.10
도시형자기부상철도의 도시철도 도입 기반 마련을 위해서는 철도안전법 개정에 따라 요구되는 도시형자기부상철도 용품의 기술기준 및 시험규격 개발이 필요하다. 이에 대응하여 도시형자기부상철도 선행 연구를 통해 도출된 자기부상철도 부상장치의 기술 사양 및 고유 특성을 포함한 기술기준 및 시험규격 개발 연구를 수행 중이다. 본 연구에서는 도시형자기부상철도에 적용되는 부상장치의 기술 요구사항 및 고유 특성을 반영한 기술기준 및 시험규격 개발 기초 연구 결과를 바탕으로 부상장치의 기술기준 및 시험규격 개발을 위한 고도화 연구를 수행하였다. In order to introduce urban rail foundation of urban maglev railway technical standards and test specifications require the development of railway safety laws urban maglev railway supplies as required by the amendment. In response, under performing the technical specifications, including technical standards and specifications, and uniquely characteristic test research and development of magnetic levitation rail system injuries derived from the urban maglev railways previous studies. This study was carried out advanced research for technology standards and test specifications development of technical standards and test specifications developed based on the findings based on emerging devices reflecting the technical requirements and the unique nature of the injury device is applied to the magnetic levitation urban railway.
도시형자기부상철도 지지애자의 성능 기준을 반영한 형식승인 용품 기술기준 보완 연구
심정욱(Jung Wook Sim),김상헌(Sang Hun Kim),박진규(Jin Kyu Park),지해영,박찬경(Chan Kyung Park) 한국철도학회 2017 한국철도학회 학술발표대회논문집 Vol.2017 No.05
개정된 철도안전법에 의해 도입된 형식승인 제도에 따라 국내 철도차량 및 용품의 형식승인을 위한 기술기준 및 시험규격 개발 연구가 수행되었다. 다만, 형식승인의 적용범위는 기존 일반철도 차량 및 용품으로 설정되어 국내 연구를 통해 개발된 도시형자기부상철도의 형식승인을 위한 기술기준 및 시험규격 개발 필요성이 대두되었다. 이에 따라 기존 일반철도와 유사성을 띄는 용품 및 자기부상철도 고유용품에 대한 기술기준 개정 연구가 수행 중이다. 본 연구에서는 도시형자기부상철도 시설 용품 중 하나인 애자에 대응하는 형식승인 기술기준의 세부 조항을 조사 분석하고, 기존 일반철도의 기술기준에 도시형자기부상철도의 성능 기준을 반영하기 위한 기술기준 보완 연구를 수행하였다. According to the type approval system introduced by the revised Railway Safety Act, The development of technical standards and test specifications for the type approval of domestic railway vehicles and equipment was conducted. However, the scope of application of type approval is set as existing general railway vehicles and supplies, and it is necessary to develop technical standards and test standards for type approval of urban magnetic levitation railway developed through domestic research. As a result, standard revision studies are being conducted on similar technologies between existing railways and magnetic levitation railways. This study investigates and analyzes the detailed provisions of the type approval technical standard corresponding to the insulator, In order to apply the performance criterion of urban magnetic levitation railway, supplementary study on existing general railway technical standard was conducted.