http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
학령전기 말더듬아동과 일반아동 부모의 구어적 상호작용 특성에 관한 종단연구: 부모의 조음속도 및 말의 자연스러움과 아동의 조음속도, 비유창성을 중심으로
황시현,이수복,이영미,심현섭 한국언어청각임상학회 2022 Communication Sciences and Disorders Vol.27 No.2
배경 및 목적: 본 연구는 부모와 아동의 구어적 상호작용 시 아동의 조음속도와 부모의 조음속도 및 말의 자연스러움의 종단적 변화를 살펴보고자 하였다. 방법: 본 연구는 만 2–5세의 학령전기 말더듬아동과 아동의 모 6쌍과 일반아동과 아동의 모 6쌍을 대상으로 하였다. 자연스러운 아동과 부모의 상호작용 발화를 2회(초기평가, 12개월 후) 수집하여 아동의 AD 빈도와 조음속도, 어머니의 조음속도와 말의 자연스러움을 분석하였다. 결과: 초기평가 및 12개월 후 시점에서 말더듬아동 집단과 일반아동 집단 간 아동의 조음속도에 통계적으로 유의한 차이가 없었다. 그러나 말더듬아동 어머니의 조음속도와 말의 자연스러움은 초기평가 및 12개월 후 시점 모두 일반아동 어머니보다 유의하게 낮은 것으로 나타났다. 말더듬아동 집단은 초기평가 및 12개월 후 시점에서 어머니의 조음속도와 어머니 말의 자연스러움이 정적상관관계를 보였으며, 일반아동 집단은 12개월 후 시점에서 아동의 조음속도와 어머니의 조음속도가 정적상관관계를 보였다. 논의 및 결론: 부모의 말 특성과 아동의 비유창성 특성 간 양방향적인 관계성을 확인할 수 있었다. 이러한 결과는 부모의 말특성이 아동의 유창성에 영향을 미치는 것과 같이 아동의 말더듬에 대한 반응으로 부모의 말 특성 또한 변화될 가능성이 있음을 시사한다.
대형 사출금형의 성형 시 발생하는 금형 휨에 관한 연구
황시현,김철규,심수길,정영득,Hwang, Si-Hyun,Kim, Chul-Gyu,Shim, Soo-Kil,Jeong, Yeong-Deug 한국금형공학회 2014 한국금형공학회지 Vol.8 No.1
Large injection molds commonly have molding defects such as flashes and variation of product thickness. In this study, we conducted injection molding CAE analysis to find out the cavity pressure and structural analysis to find out mold deflection as input load conditions injection pressure obtained from injection molding analysis. As the results from CAE analysis, we found which element is the most effective on the mold deflection and we suggested a mold design to minimize the mold deflection.
뇌졸중으로 오인된 축삭구형체를 동반한 유전미만백질뇌병증 환자 증례
황시현,하장완,최민영,정희정,조은빈,양태원,박기종,정승욱,김승주 대한신경과학회 2022 대한신경과학회지 Vol.40 No.4
Hereditary diffuse leukoencephalopathy with axonal spheroids (HDLS) is a rare autosomal dominant disorder that is caused by colony stimulating factor 1 receptor gene mutation degenerating the cerebral white matter. It is characterized by various symptoms such as progressive cognitive decline, personality changes, and motor disorders. Since these clinical features are not consistent, HDLS is often underdiagnosed or misdiagnosed. This case report presents a patient priorly diagnosed with cerebral infarction by clinical features, but eventually with HDLS by a genetic test.
황시현,서기영,김철규,김명기,지성대,정영득,Hwang, Si-Hyun,Seo, Gi-Yeong,Kim, Chul-Kyu,Kim, Meong-Gi,Ji, Seong-Dae,Jung, Yeong-Deuk 한국금형공학회 2008 한국금형공학회지 Vol.2 No.2
Injection molding is representative process of plastic production. Most of numerical analyses for injection molding have been based on the Hele Shaw's approximation: two-dimensional flow analysis. The present work covers numerical analyses of injection molding using three-dimensional solid elements. The accuracy of the analysis results has been verified through some numerical examples in comparison with the various conditions. In this study, moldflow software was used to analyze the cooling analysis. The results of cooling analysis and testing catapult were compared for plastic products.
자동차범퍼의 사출성형 해석결과와 실제 성형품의 비교 연구
황시현(S. H. Hwang),김철규(C. G. Kim),지성대(S. D. Ji),김명기(M. K. Kim),문영배(Y. B. Moon),정영득(Y. D. Jeong) 한국정밀공학회 2006 한국정밀공학회 학술발표대회 논문집 Vol.2006 No.5월
Importance of using an injection molding analysis has been increased. However the application of it has not been increased because the results of analysis do not sometime match to practical molding. Therefore, the difference of flow analysis and practical molding should be decreased. This study presents reasons of the difference for the location of weld-line in the flow analysis and practical molding on automobile bumper molding.