파라메트릭 기술기반 철근 콘크리트 구조물의 기둥부재 자동배근시스템 구축에 관한 연구

홍성욱,조영상,이제혁,홍성철,Hong, Seong-Uk,Cho, Young-Sang,Lee, Je-Hyuk,Hong, Seong-Chul 대한건축학회 2011 대한건축학회논문집 Vol.27 No.1

Recently, as there has been high interests in Building Information Modeling (BIM), there are studies and movements to adapt this new paradigm in both academic field and industrial field. While, Reinforced concrete structure is a mainly used structural system in Korea. However, it is limited the development of reinforced concrete system in BIM comparing to that of steel structures. The primary reason is that it is not interoperable the information on reinforcement in RC structures and the progress of modeling reinforcement has a low productivity for a reinforcement object being created manually by user in the BIM platform. For the requirements, ARPM(Automatic Reinforcement Placing Module) has been developed to connect structural analysis and design database to BIM platform, to perform the design of reinforcement placing and to draw reinforcement in BIM platform, in this study. By developing the ARPM, it is expected to raise the productivity of the construction for RC structures and increase the effectiveness in the current modeling process in BIM platform.

특집 II (1) 다윈은 누구이며 무엇을 했는가? - '종의 기원'으로 인간과 자연계를 바라보는 시각 바꾸다

홍성욱,Hong, Seong-Uk 한국과학기술단체총연합회 2009 과학과 기술 Vol.42 No.3

위험 사회 대비하는 '위험 커뮤니케이션' - 위험 사회를 극복하는 위험 커뮤니케이션의 조건들

홍성욱,Hong, Seong-Uk 한국과학기술단체총연합회 2013 과학과 기술 Vol.525 No.-

Weissella cibaria가 생산하는${\alpha}$-Galactosidase 및 ${\beta}$-Glucosidase의 특성

홍성욱,류래균,정병문,김완식,정건섭,Hong, Sung-Wook,You, Lae-Kyun,Jung, Byung-Moon,Kim, Wan-Sik,Chung, Kun-Sub 한국미생물·생명공학회 2009 한국미생물·생명공학회지 Vol.24 No.3

대두의 발효를 통하여 생리활성을 가지고 있는 이소플라본 aglycone 함량을 높이기 위한 ${\beta}$-glucosidase와 대두에 다량 함유되어 있는 stachyose, rafinose와 같은 난소화성 oligosaccharides를 분해하기 위해 ${\alpha}$-galactosidase 효소 분비 미생물을 김치로부터 ${\alpha}$-galactosidase와 ${\beta}$-glucosidase를 생산하는 미생물을 탐색하였다. 탐색과정을 위해서 선별한 미생물을 16S rDNA sequencing 동정한 결과, Weissella cibaria 동정되어 Weissella cibaria K-M1-4로 명명하였다. Weissella cibaria K-Ml-4를 대두 액체배지에서 18시간동안 배양한 후, 생산한 효소는 배양액을 에탄을 침전, DEAE sepharose, sephacryl S-100HR column chromatography 통하여 ${\alpha}$-galactosidase의 경우, 정제도 5.3배, 수율 3.5% 그리고 ${\beta}$-glucosidase의 경우, 정제도 4.4배, 수율 2.9%로 정제되었다. ${\alpha}$-Galactosidase 효소특성은 $60^{\circ}C$에서 최대 활성을 나타내었으며, $80^{\circ}C$에서 30분 처리시 43% 잔존활성을 보였다. pH 8.0에서 최대 활성을 나타내었으며, pH 5.0-9.0에서 안정하였다. 금속이온에 대한 영향에서 $Fe^{2+}$과 $Cu^{2+}$을 첨가하였을 때 효소 활성이 증가하였다. p-Nitrophenyl-${\alpha}$-D-galacto-pyranoside (PNPG) 기질에 대한 Km은 0.98 mM이었고, Vmax는 $1.81{\mu}$mole/min 이었다. ${\beta}$-Glucosidase 효소 특성은 $50^{\circ}C$에서 최대 활성을 나타내었으며, $80^{\circ}C$에서 30분 처리시 46% 잔존활성을 보였다. pH 7.0에서 최대 활성을 나타내었으며, pH 5.0-9.0에서 안정하였다. 금속이온에 대한 영향에서 $Fe^{2+},\;Co^{2+},\;Cu^{2+}$을 첨가하였을 때 효소 활성이 증가하였다. p-Nitrophenyl-${\beta}$-D-gluco-pyranoside (PNPG)에 대한 Km값은 1.24mM이었고, Vmax는 $6.81{\mu}$mole/min 이었다. A strain producing ${\alpha}$-galactosidase and ${\beta}$-glucosidase was isolated from Kimchi. The isolated strain was identified as Weissella cibaria by 16S rDNA analysis and designated as Weissella cibaria K-M1-4. The enzyme activity of ${\alpha}$-galactosidase and ${\beta}$-glucosidase reached the maximum in the soy medium at $37^{\circ}C$ for 24 hr. The enzymes were purified by ethanol fractionation, DEAE sepharose fast flow, and sephacryl S-100HR column chromatography. ${\alpha}$-Galactosidase specific activity was shown by 576 Units/mg protein and the yield was 3.5% of the total activity of crude extracts. ${\beta}$-glucosidase specific activity was shown by 480 Units/mg protein and the yield was 2.9% of the total activity of crude extracts. The optimum temperature for ${\alpha}$-galactosidase was $60^{\circ}C$ and 43% of its original activity remained when it was treated at $80^{\circ}C$ for 30 min. For ${\alpha}$-galactosidase shows the optimum pH of 8.0 and is fairly stable between pH5.0 and pH9.0. The enzyme activity was increased in the presence of $Fe^{2+}$ and $Cu^{2+}$. The value of Km and Vmax for the enzyme were 0.98 mM and $1.81{\mu}$mole/min, respectively. The ${\beta}$-glucosidase has the optimum temperature of $50^{\circ}C$ and 46% of its original activity remained when it was treated at $80^{\circ}C$ for 30min. Its optimum pH of 7.0 and is fairly stable between pH5.0 and pH9.0. The enzyme activity was increased in the presence of $Fe^{2+},\;Co^{2+}$ and $Cu^{2+}$. The value of Km and Vmax for the enzyme were 1.24 mM and $6.81{\mu}$mole/min, respectively.

Effects of Substrates on Nanofiltration Characteristics of Multilayer Polyelectrolyte Membranes

홍성욱,Hong, Seong-Uk The Membrane Society of Korea 2008 멤브레인 Vol.18 No.2

선행 연구에서 poly(styrene sulfonate) (PSS)/poly(diallyldimethylammonium chloride) (PDADMAC) 나노 여과막을 사용하여 불소 이온을 포함한 1가 이온 혼합물을 분리하는 것이 가능함을 보였다. 예를 들면, 다공성 알루미나 지지체에 $(PSS/PBADMAC)_4PSS$ 필름을 코팅한 경우 염소/불소 이온의 선택도가 3 이상이었으며 4.8 bar에서 용액의 플럭스가 $3.5m^3/m^2$-day이었다. 그러나, PSS/PDADMAC 이층의 수가 4.5에서 5.5.로 증가하면 염소/불소 이온의 선택도가 1.9로 떨어졌으며, $(PSS/PDADMAC)_6PSS$ 필름의 경우에는 염소 이온의 배제율이 급속히 증가하면서 선택도가 1에 가까웠다. 이러한 선택도의 감소 현상은 예상치 못한 것으로서 다른 지지체를 사용하여도 같은 경향을 보이는지 여부는 불분명하였다. 따라서, 본 연구에서는 다공성 알루미나 대신에 분획 분자량이 50kDa인 다공성 polyethersulfone (PES)에 PSS/PDADMAC을 적층하고 불소/염소 이온 혼합물의 나노 여과 특성을 살펴보았다. 그 결과 다공성 알루미나의 경우와 비록 적층 수는 달랐으나 불소 이온의 배제율이 최대가 되는 최적 적층수가 존재하였으며 이로부터 이러한 현상이 지지체에 무관한 일반적인 사실임을 알 수 있었다. In a previous study, we probed the potential of poly(styrene sulfonate) (PSS)/poly(diallyldimethylammonium chloride) (PDADMAC) nanofiltration (NF) membranes for the separation of monovalent anions, with an emphasis on the selective rejection of $F^-$. Remarkably, deposition of $(PSS/PBADMAC)_4PSS$ films on porous alumina supports yielded membranes that exhibited $Cl^-/F^-$ selectivity > 3 with minimal $Cl^-$ rejection, and a solution flux of $3.5m^3/m^2$-day at 4.8 bar. When the number of PSS/PDADMAC bilayers was increased from 4.5 to 5.5, however, $F^-$ rejection decreased from 73% to 50% and $Cl^-/F^-$ selectivity dropped to 1.9. Addition of another bilayer to form $(PSS/PDADMAC)_6$ PSS films resulted in a significant increase in $Cl^-$ rejection to give essentially no $Cl^-/F^-$ selectivity. The decrease of selectivity with deposition of more than 4.5 bilayers was not expected and it was unclear whether this characteristic was substrate independent. In this study, to investigate the effect of substrates on NF performance of multilayer polyelectrolyte membranes, PSS/PDADMAC films were deposited on 50 kDa polyethersulfone (PES) ultrafiltration supports instead of porous alumina supports. The results indicate that, although fluoride rejection and the number of bilayers at which a maximum $F^-$ rejection occurs are different, the trend is similar for both types of substrates. Therefore, we can conclude that the M: characteristics of multilayer polyelectrolyte membranes may be substrate independent.

복합재 티모센코 보의 굽힘 비틀림 연성 진동에 대한 엄밀해

홍성욱,강병식,박중윤,Hong, Seong-Uk,Gang, Byeong-Sik,Park, Jung-Yun 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.10

This paper proposes a dynamic analysis method for obtaining exact solutions of composite Timoshenko beams, which are inherently subjected to both the bending , and torsional vibrations. In this paper, the bending-torsion coupled vibration of composite Timoshenko beam is rigorously modelled and analyzed. Two numerical examples are provided to validate and illustrate the bending-torsion coupled vibration of composite Timoshenko beam structure. The numerical examples prove that the proposed method is of great use for the dynamic analysis of dynamic structures composed of multiply connected composite Timoshenko beams.

여러 스팬을 갖는 티모센코 보 구조물의 이동하중에 의한 진동 해석

홍성욱,김종욱,Hong, Seong-Uk,Kim, Jong-Uk 대한기계학회 1999 大韓機械學會論文集A Vol.23 No.11

The present paper proposes a new dynamic analysis method for multi-span Timoshenko beam structures supported by joints with damping subject to moving loads. An exact dynamic element matrix method is adopted to model Timoshenko beam structures. A generalized modal analysis method is applied to derive response formulae for beam structures subject to moving loads. The proposed method offers an exact and closed form solution. Two numerical examples are provided for validating and illustrating the proposed method. In the first numerical example, a single span beam with multiple moving loads is considered. A dynamic analysis on a multi-span beam under a moving load is considered as the second example, in which the flexibility and damping of supporting joints are taken into account. The numerical study proves that the proposed method is useful for the vibration analysis of multi-span beam-hype structures by moving loads.

차세대 유산균 포스트바이오틱스

홍성욱,Hong, Sung Wook 한국축산식품학회 2020 축산식품과학과 산업 Vol.9 No.1

용접구조용 고강도강재의 피로균열성장특성에 관한 실험적 연구

홍성욱,경갑수,남왕현,정영화,Hong, Sung Wook,Kyung, Kab Soo,Nam, Wang Hyun,Jung, Young Hwa 한국강구조학회 2002 韓國鋼構造學會 論文集 Vol.14 No.6

In this study, a series of fatigue tests are performed in order to estimate quantitatively the characteristics of fatigue crack growth rate according to the base metal, heat affected zone(HAZ) and weld metal, and the welding method and grade of strength of object steels, and the influence on fatigue crack growth rate according to the direction of welded line for high strength steels of SM570, POSTEN60, and POSTEN80 steels. From the fatigue test results, the retardations of fatigue crack growth rate are remarkable in case that the direction of notch is parallel to welded line than in case that the direction of notch is perpendicular to welded line because of compresive residual stress in weld metal & HAZ. And the characteristics of fatigue crack growth rate according to welding method are that the dispersion of fatigue crack growth rate in case of FCAW method is smaller than that of SAW method. Also, it knows that the fatigue crack growth rate converges in high stress intensity factor range. Meanwhile, fatigue safety is guaranteed sufficiently in the object steels because the fatigue crack growth rate in the range of fatigue crack propagation has a similar tendency to the test results & existing results. 본 연구에서는 향후 사용빈도가 증가할 것으로 예상되는 SM570, POSTEN60 및 POSTEN80 강재를 대상으로 용접선 방향이 피로균열성장속도에 미치는 영향, 용접방법 및 강도등급에 따른 피로균열성장특성, 그리고 각 재질별(모재부, 열영향부, 용접금속부) 피로균열 성장특성을 정량적으로 평가하기 위해서 CT시험편을 제작해서 일련의 피로시험을 실시하였다. 피로시험결과 노치가 용접선과 평행한 시험체의 경우 노치선단에 존재하는 압축잔류응력의 영향으로 노치가 용접선과 직각인 시험체의 경우보다 피로균열성장속도의 지연현상이 현저해지는 것을 알 수 있었다. 그리고 용접 방법에 따른 피로균열성장특성은 강재의 강도등급에 관계없이 FCAW가 SAW에 비해서 피로균열성장속도의 분산이 적게 나타나고 있으며, 또한 높은 응력확대계수범위 영역에서 피로균열성장속도의 수렴현상이 나타나는 것을 알 수 있었다. 한편 본 피로시험결과와 기존의 연구결과를 비교하면 피로균열성장영역에서의 피로균열성장속도는 유사한 경향을 나타내고 있으므로 본 연구에서 대상으로 한 강재는 피로안전성을 충분히 확보하고 있음을 알 수 있었다.

효율적 물류관리의 방향과 과제

홍성욱,Hong, Seong-Uk 한국주류산업협회 1994 주류산업 Vol.14 No.2