http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
현준원(June Won Hyun),황정일(Jeong Il Hwang) 한국표면공학회 2007 한국표면공학회지 Vol.40 No.2
NiCl₂ and poly-L-lysine coated protein chip plates have been fabricated using a spin coating system. Water has been used as solvent and scratching effects on glass slides and ITO have been investigated. We also observed the surface properties of NiCl₂ and poly-L-lysine coated slides by using PSA(Particle size analyzer) and AFM(Atomic force microscope). The AFM results imply that the surface patterns created in the spin coating system determine the protein adsorption. Adsorption of histidine-tagged KRS proteins immobilized on glass slides and ITO was analyzed using a BAS image system. The results suggest that the scratching effect was increased ability of protein adsorption.
현준원(June Won Hyun),윤미영(Mi Young Yun),안상민(S. M. An),노승정(S. J. Noh),허영덕(Young-Duk Huh),박헌용(Heonyong Park),송예신(Y. S. Song),피재호(Jaeho Pyee),김경례(K. R. Kim),김성훈(H. S. Kim) 한국표면공학회 2004 한국표면공학회지 Vol.37 No.2
Nickel chloride coated protein chip plate was developed by using a spin coating method. The ability of histidine tagged protein adsorption was investigated at various solvents. The surface of plate has a large aggregated nickel complex with high density in water. However, the surface of plate has a very small size of aggregated nickel complex with low density in isopropanol. The ability of protein adsorption decreased as increasing the size of alkyl chain in various alcohol solvents. The mechanism on the ability of protein adsorption at the plate surface is discussed.
강유전체(K<SUB>0.5</SUB>Na<SUB>0.5</SUB>)NbO₃의 제조 및 전기적 특성 분석
현준원(June Won Hyun),변재덕(Jaeduk Byun) 한국표면공학회 2017 한국표면공학회지 Vol.50 No.4
Ferroelectric ceramics are broadly used for various industrial applications. In this research, the lead-free ferroelectric ceramics of (K0.5Na0.5)NbO₃ was fabricated by using the solid state synthesis. The (K0.5Na0.5)NbO₃ pellets were sintered at 1200, 1150 and 1100 ℃ for 4 hours in air atmosphere. Field-emission scanning electron microscopy (FE-SEM) characterization of the sintered KNN ceramics revealed surface morphology and grain size. And we used the X-ray diffraction (XRD) for measuring the sample crystal phase. Temperature dependence of the dielectric constant was measured by using an LCR meter. The sintered at 1150 ℃ for 4 hours sample has a highest dielectric constant 6011 at Curie temperature (TC) and dense structure with 2.33 μm grain size.
한국전통춤의 개량화 동작과 결합한 스텝박스(step box) 운동의 하지관절에 미치는 영향에 대한 회전역학적 고찰
김선정 ( Kim Sun-jung ),최형준 ( Choi Hyung-joon ),현준원 ( Hyun June-won ) 한국무용연구학회 2017 한국무용연구 Vol.35 No.3
본 연구에서는 한국전통춤의 개량화 동작과 결합한 스텝박스 운동에 대한 하지관절의 회전역학적 운동의 물리적 고찰을 통해 스텝박스 운동 메커니즘을 정립하여 스텝박스 운동에 대한 과학적, 이론적 배경을 뒷받침하고자 한다. 일반적으로 음식물을 통한 내부에너지는 계속해서 인체 내 근육에 저장되고, 스텝박스 운동을 함으로써 근육에 저장된 에너지가 운동 역학적 에너지로 전환되어 인체로부터 열에너지를 몸 밖으로 배출하게 된다. 따라서 에너지 보존원리에 따라 음식물을 통한 에너지원 공급은 운동을 함으로써 에너지가 소멸되는 것이 아니라 역학적 에너지나 열에너지로 그 형태만을 변환시키게 된다. 본 연구의 실험 비교분석을 위해 50대 성인 남녀 8명을 선택하여 12주간 동안, 1주일에 2회씩 한국전통춤의 개량화 동작을 실행한 전후, 양쪽 발의 하지관절에 대한 유연성을 관찰하였다. 한국전통춤의 개량화 동작 시행 전후의 하지관절의 굽힘정도를 살펴보기 위해 하지관절의 굽힘 각변위를 측정하였으며, 근력향상성과 유연성을 살펴보기 위해 하지관절의 각속도의 측정을 실시하였다. 스텝박스운동에서 하지관절의 각변위와 각속도의 변화를 통해 하지관절의 유연성과 평형성의 향상을 관찰할 수 있었으며, 이를 통해 하체의 근력을 향상시키는 물리적 해석을 보여준다고 할 수 있겠다. The research was to investigate the scientific and theoretical mechanism of step box exercise of based on physical consideration for rotational dynamics of muscle of the lf ower part of the body during step box exercise combined with improved motions of Korean traditional dance. We selected 8 male and female adults in their 50s to measure the their physical balance and flexibility, and they practiced the improved motions of Korean. Traditional dance two times a week during 12 weeks. We analyzed the human effects for before or after of step box exercise through measurements of angular displacements and angular velocities. The step box exercise brought the improvement effect of body balance and flexibility for the lower limb joints of both legs largely.
유승우(Seung-Woo Yoo),Ali Zamiri,오현준(Hyun-June Oh),문영준(Young-June Moon) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 청소기의 원심 압축팬의 유동과 음향을 수치해석을 통해 예측하고, 실험을 통해 얻은 자료와 비교하였다. 와류와 난류에 의한 유동 특징을 정확하게 예측하기 위해서 3차원 Navier-Stokes equation을 계산하였으며, 난류모델은 k-epsilon을 사용하였다. 예측된 유동장의 분석을 통해 소음의 원인이 되는 압력섭동이 가장 크게 일어나는 위치를 찾고자 하였다. Sound Pressure Level(SPL)을 통 하여, 실험값과 비교를 수행하였으며 전체적인 소음의 특징을 만들어 내는 위치를 확인하였다.