http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
세계의 폐기물처리기술 동향과 DAEWOO-TS 열분해 가스화 용융기술
허일상,김우봉 한국환경독성학회 2001 환경독성보건학회지 Vol.16 No.2
세계적 페기물처리기술 동향은 2000 년도를 기점으로 하여 직접소각방식에서 폐기물을 자원화 할 수 있고 환경부하를 발생시키지 않는 특징 때문에 열분해가스화용융기술로 급속히 전환되고 있으며 우리나라도 소각재로 인한 매립지난과 국토오염을 방지하기 위하여 시급히 열분해 가스화용융기술을 적용해야 하며 지금까지 개발된 열분해 용융기술중 DAEWOO-THERMOSELECT 열분해가스화용융기술은 압축, 탈가스화, 가스화, 용융공정을 통해 페기물을 합성가스, 용융슬래그, 금속수산화물, 공업용염, 황등의 형태로 전량 자원화 할 수 있는 대표적 시스템이다. Worldwide trend of waste treatment technology is rapidly transferring from "incineration system" to "gasification & melting system"
허일상(IL-SANG HUH) 한국유체기계학회 2005 유체기계 연구개발 발표회 논문집 Vol.- No.-
The worldwide trend of waste treatment technology is rapidly transferring from "incineration system" to "gasification & melting system" which can derive the resources from waste and charge no more environmental burden to nature. And therefore it is necessary to adopt gasification & melting system to prevent the land pollution and to solve the problem of landfill area. Among several thermal waste treatment processes gasification and melting system is the representative process which can transfer waste to resources such as syn-gas, molten slag, metal hydroxide, mixed salt and sulfur through the process of compaction, pyrolysis, gasification and melting.
이진욱,박병수,윤용승,서정대,허일상,Lee, Jin-Wook,Park, Byung-Soo,Yun, Yong-Seung,Seo, Jung-Dae,Huh, Il-Sang 한국연소학회 1999 한국연소학회지 Vol.4 No.1
Numerical analysis for the combustion flow in the combustion chamber of incineration system has been carried out in order to acquire the basic design capability of incineration system. Established mathematical model was applied to the performance prediction of the pre-designed combustion chamber of commercial plant. Especially, combustion characteristics and the variation of flow pattern have been deeply discussed in accordance with secondary air injection. Secondary air injection was effective for the turbulent mixing between air and carbon monoxide/volatile matter resulting in considerably reduced CO content at the exit. Secondary air injection was found to be one of the key design parameters because the size of recirculation zone could be changed with the variation of injection characteristics.
해수 농축수 내 금속 이온 농도에 따른 이산화탄소 전환 생성물의 특성연구
최은지,강동우,유윤성,박진원,허일상 한국화학공학회 2019 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.57 No.4
Global warming has mentioned as one of the international problems and these researches have conducted. Carbon Capture, Utilization and Storage (CCUS) technology has improved due to increasing importance of reducing emission of carbon dioxide. Among of various CCUS technologies, mineral carbonation can converted CO2 into high-cost materials with low energy. Existing researches has been used ions extracted solid wastes for mineral carbonation but the procedure is complicated. However, the procedure using seawater is simple because it contained high concentration of metal cation. This research is a basic study using seawater-based wastewater for mineral carbonation. 3 M Monoethanolamine (MEA) was used as CO2 absorbent. Making various concentrations of seawater solution, simulated seawater powder was used. Precipitated metal carbonate salts were produced by mixing seawater solutions and rich-CO2 absorbent solution. They were analyzed by X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Thermogravimetric Analysis (TGA) and studied characteristic of producing precipitated metal carbonate and possibility of reusing absorbent. 지구온난화가 국제 문제로 언급되면서 온실가스 저감에 관한 연구가 꾸준히 진행되고 있다. 지구온난화의 가속화를막기 위해 지구온난화의 주된 원인으로 언급되는 이산화탄소 저감에 관한 기술 개발의 중요성이 증가하게 되었고 이로 인해 이산화탄소 포집, 저장 및 재이용기술(CCUS, Carbon Capture, Utilization and Storage)의 발전을 요구하고 있다. 다양한 이산화탄소 포집, 저장 및 재이용기술 중에서 광물탄산화 기술의 경우에는 적은 에너지를 통해 많은 이산화탄소를 고부가가치 물질로 전환할 수 있다. 기존 연구에서는 고형 폐기물에서 이온을 용출해 사용해왔으며 이는 처리 과정이 복잡하다. 하지만 해수를 사용하게 되면 고농도의 금속 양이온이 해수 속에 용해되어 있어 고형 폐기물을이용할 때보다 공정이 단순하다. 이 연구는 해수담수화 농축수를 금속양이온공급원으로써 사용하기 위한 기초연구로, 3 M 모노에탄올아민(Monoethanolamine, MEA)을 흡수제로 사용하여 이산화탄소를 우선적으로 포집하였다. 또한 해수농축수를 모사하기 위해, 해수모사파우더를 사용하여 다양한 농도의 해수농축수를 제조하였다. 해수농축수와 포집된 이산화탄소 용액을 반응시켜 탄산염을 생성하였으며 이를 XRD (X-ray Diffraction), SEM (Scanning Electron Microscopy), TGA (Thermalgravimetric Analysis)를 통해 탄산염의 생성 경향 및 흡수제의 재이용 가능성을 파악하였다.