http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
허노성,김선영,홍성걸,이수곤 대한건축학회 2001 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.21 No.1
This paper investigates the effect of cut-off bars on the shear force transfer mechanism in deep beams. Especially, this study focuses on bond stress distribution patterns of cut-off bars influenced by high shear force near the cut-off point and the difference between band transfer of cut-off bars and that of lap splices. The specimens with different length of cut-off bars and the locations in the beam width are compared with the theoretical approach proposed by the truss model. Experimental results showed that the strength of beams wins external cut-off bars are higher than those with internal cut-off bars. However, the beams with eternal cut-off bars fail in a manner of low ductility. The truss models explain the strength differences between the two series of specimens. The understanding of the influence of the stress states of continuous longitudinal bars on the bond transfer of cut-off bars provides a guideline for an efficient detailing of cut-off bars.
Polyimide계 배향막의 합성과 그 입체구조가 액정분자의 프리틸트 각에 미치는 영향
김재창,이상진,허노성,권덕용,이진국 釜山大學校生産技術硏究所 1997 生産技術硏究所論文集 Vol.53 No.-
Polyimide계 배향막은 고온처리 등 디스플레이 제조공정을 거치면서도 액정 배향특성이 유지되며 장시간 사용에도 물리·화학적 안정성이 좋은 장점을 가지고 있어 널리 사용되고 있다. 이 배향막을 연구하는데 있어서 합성기술과 러빙처리에 따른 배향막 표면의 특성분석이 필수적이며, 본 연구에서는 Diamine과 Dianhydride를 NMP용매하에서 용액중합하여 polyamic acid를 합성한 후, ITO코팅된 유리표면위에 스핀개스팅하여 박막을 입히고 열적처리를 하여 이미드화시켰다. 배향막의 배향을 위해서 러빙처리를 하고, 러빙처리 전후의 접촉각 측정을 통한 배향막 표면장력변화를 harmonic-mean 방법으로 구했고 2차 고조파 신호 (SHG) 분석을 통한 배향막 표면분자들의 방향성 분포를 검토해 보았다. Polyimide의 반복단위구조를 컴퓨터 그래픽 프로그램 (CS Chem3D Pro)을 사용하여 3차원적으로 시뮬레이션함으로서 polyimide의 입체구조를 알아보았다. 그리고 그 입체구조와 프리틸트 각과의 상관관계를 분자간 상호 작용설을 근거로 하여 살펴보았다. Polyimide has been widely used as the alignment film for liquid crystal displays because of their excellent properties, such as thermal can chemical stability. In this experiment, polyamic acid is rapidly formed at ambient temperatures when a diamine and a dianhydride are added into NMP. Polyimide films were fabricated by spin-coating solution on ITO-coated glass substrates. Polyimide films were baked at 80oC and then cured at 150oC 250oC for 30min at each temperature. The polyimide-coated substrates were rubbed by a rubbing machine with a roller. We measured the contact angles and the second-harmonic signals on the surface of samples to know the surface tension and the surface orientation of samples. and We also measured the pretilt angle of liquid crystal molecules in order to find the effect of the rubbing strength and the steric structure of polyimides on it.