http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
표면처리에 의한 Carbon Black 의 표면물성변화
이창우,이창일,홍영호,홍인권,장윤호,함영민 ( Chang Woo Lee,Chang Il Lee,Young Ho Hong,In Kwon Hong,Yun Ho Jang,Yeong Min Hahm ) 한국공업화학회 1996 공업화학 Vol.7 No.4
카본블랙은 일반적으로 보강성, 착색성, 내후성, 내화학성 및 전기적 전도성 등의 다양한 특성을 가지고 있으나 매질과의 친화력이 낮아 이용하는데 어려움을 내포하고 있다. 따라서 본 연구에서는 카본블랙의 표면특성을 변화시켜 매질과의 친화력을 향상시키기 위하여 표면에 비교적 많은 기능기를 가지고 있는 channel black은 표면 카르복실기의 수소를 알칼리 금속과 치환하였고, 표면 기능기가 거의 존재하지 않는 furnace black은 질산으로 처리하였다. 이와 같이 표면의 특성을 변화시켜 카본블랙의 물성변화를 측정하고, 수용액 속에서의 분산특성을 연구하여 다음과 같은 결론을 얻을 수 있었다. 표면처리된 channel black의 경우 치환된 금속(Li, Na, K)의 이온반경이 증가함에 따라 입자 표면의 수화도 증가로 인하여 분산성이 향상되었고, 질산처리한 furnace black의 경우 산의 농도 및 반응온도에 비례하여 표면 기능기의 증대를 가져왔으며 반응시간에는 크게 영향을 받지 않음을 알 수 있었다. 또한 전해질 용액에서 pH 변화에 따른 제타전위를 측정한 결과 카본블랙 입자의 표면 전하밀도가 증가하고, 이에 따른 전기적 반발력 증가로 인한 분산성의 향상과 비교적 안정한 계를 이루고 있음을 확인하였다. Carbon Black has various advantageous properties such as reinforcement, tinting, weathering, chemical resistance, electrical resistance, etc., but it has poor affinity in the solution. The purpose of this study is to enhance dispersion in the aqueous solution by altering the surface characteristics. Two different treatments were applied for both channel black and furnace black respectively. Channel black was treated in alkaline solution to replace hydrogen of the carboxyl group with alkaline metal, Li, Na, K. Furnace black has few functional groups, and it was treated with HNO₃to increase the number of functional group on carbon black. It was seen that the substitution of alkaline metal on the surface of channel black enhances the degree of dispersion. Also the higher the acid concentration and reaction temperature, the more the number of some functional groups on the furnace black. Reaction time was not seen to be effective.
탄성중합체 함유량 변화에 따른 폴리아미드-6,6 / 탄성중합체 블랜드물의 특성
이융(Yoong Lee),이창우(Chang Woo Lee),차윤호(Yoon Ho Cha),함영민(Yeong Min Hahm) 한국고무학회 1999 엘라스토머 및 콤포지트 Vol.34 No.1
N/A In this study, binary polyamide 6,6(PA 6,6)/ethylene-propylene rubber(EPM) or EPM-g-maleic anhydride(EPM-g-MA) blends and ternary PA 6,6/EPM/EPM-g-MA blends with various elastomer content were prepared in order to investigate the degree of influence of elastomer content and average particle size, morphology, and distribution of dispersed elastomer on mechanical and thermal properties of blends. According to the results, notched Izod impact strength and relative crystallinity of binary blends modified with EPM-AMA as well as average particle size and distribution of dispersed elastomer in such blends were more improved than those of binary blends modified with EPM. Notched Izod impact strength of blend whose composition ratio(wt%) was 70:30(PA 6,6: EPM-g-MA) was the highest among the binary PA 6,6/EPM-g-MA blends. The impact strength was increased by 25 times and its relative crystallinity was increased by 7 times when compared with those of polyamide 6,6. In the case of ternary PA 6,6/EPM/EPM-g-MA blend of which composition ratio was 70 : 15 : 15(PA 6,6 : EPM : EPM-g-MA), the elastomer was finely distributed with the average particle size of 0.56㎛. The Izod impact strength of this blend was the highest of all blends prepared with different elastomer content.