http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
뇌졸중 후유증으로 인한 족하수(Foot drop)의 예방과 치료에 첩대 요법을 병행한 환자 치험 2례
최인호,황진우,유상민,정재중,이용현,송윤경,임형호,Choi, In-Ho,Hwang, Jin-Woo,Yoo, Sang-Min,Jung, Jae-Jung,Lee, Yong-Hyun,Song, Yun-Kyung,Lim, Hyung-Ho 척추신경추나의학회 2006 척추신경추나의학회지 Vol.1 No.2
This study report foot drop patients, who improved by taping therapy. We applied therapy and check ROM, walking ability, MMT. It is considered that this therapy is meaningful for Foot drop.
지황백호탕(地黃白虎湯)으로 호전된 연하장애(嚥下障碍)와 언어장애(言語障碍)를 동반한 뇌졸중(腦卒中) 환자 치험례
최인호,김나영,홍솔이,신미란,Choi, In-Ho,Kim, Na-Young,Hong, Sol-Yi,Shin, Mi-Ran 사상체질의학회 2008 사상체질의학회지 Vol.20 No.2
1. Objectives The purpose of this study is to evaluate the effect of Gihwangbaekho-tang which is based on the Sasang Constitutional Medicine for the cerebrovascular accident patient who has suffered from dysphasia and dysphagia. 2. Methods The subject is about 69-year-old cerebrovascular accident patient suffering from dysphasia and dysphagia who was diagnosed as Soyangin interior overheated disease based on his nature & emotion, physical chracteristics, symptoms, and we have prescribed Gihwangbaekho-tang. 3. Results and Conclusions Cerebrovascular accident parient is suffering from dysphagia, dysphasia, insomnia, constipation, quadroparesis treated with Gihwangbaekho-tang were improved. This study describes the improvement of dysphagia, dysphasia and other general sypmtoms using Gihwangbaekho-tang. Gihwangbaekho-tang takes effect Soyangin interior overheated disease.
하악 과두 골절과 심한 잔존치조제 흡수를 보이는 완전 무치악 환자에서 폐구 인상법과 고딕아치 묘기법을 이용한 총의치 수복 증례
최인호,김성아,김나홍,이용상,Choi, In-Ho,Kim, Seong-A,Kim, Na-Hong,Lee, Yong-Sang 대한치과보철학회 2020 대한치과보철학회지 Vol.58 No.2
심미와 기능이 조화를 이루는 총의치 제작을 위해서는 상하악 관계를 정확히 기록하는 것이 필수적이다. 고딕아치 묘기법은 하악의 운동을 시각적으로 보여주며, 정확하고 반복재현성 있는 중심위를 확립하는데 유용하다. 또한, 고도의 치조제 흡수를 갖는 환자에서는 총의치의 적절한 유지 및 안정을 얻기가 어려운데, 이런 경우 환자의 생리적인 동작으로 변연을 형성하여 의치상연 주위가 가동점막으로 봉쇄되도록 하는 폐구 인상법이 유용할 수 있다. 본 증례에서는 우측 하악과두골절 병력과 고도의 하악 치조제 흡수를 보이는 환자에서 폐구인상법과 고딕아치 묘기법을 이용한 총의치로 수복하였고 만족할 만한 결과를 얻어 보고하는 바이다. It is essential to record maxillomandibular relationship accurately for the harmony of esthetic and function in complete denture. Gothic arch tracing visually demonstrates the movement of the mandible, and is useful to establish accurate and reproducible centric relation. Proper retention and stability of complete denture in patients with severe alveolar bone resorption is difficult to attain. In such case, the closed mouth impression technique might be recommended. The denture border and impression are determined by patient's physiologic movement in the closed mouth impression technique. And, denture peripheral border is entirely closed with oral mucous membrane. This report presents satisfactory complete denture restoration using closed mouth impression technique and gothic arch tracing in patients with mandibular condyle fracture and severe absorption of mandibular alveolar ridge.
이용환(Yong-Hwan Lee),최인호(In-Ho Choi) 한국환경관리학회 2006 環境管理學會誌 Vol.12 No.4
본 연구는 수중에 용해된 인과 질소 제거효과를 갖는 세라믹소재를 개발하기 위하여 수행되었다. 감람석을 이용한 인의 제거효과는 “이”와 “최”의 연구에서 수행된바 있으며, 제올라이트를 이용한 질소제거에 관한 연구는 국내외적으로 많이 수행되어 왔다. 본 연구에서는 감람석(Olivine)과 제올라이트(Zeolite)를 서로 다른 부피 혼합비에 따라 혼합한 후 소성하여 얻어진 세라믹을 이용하여 수중에 용해된 총인(Total-Phosphorus)과 총질소(Total-Nitrogen)의 제거효과를 회분식 실험(batch reactor system)을 통해 분석하였다. 연구결과 총인의 경우 감람석과 제올라이트의 부피 혼합비가 1:2의 경우 최고의 제거효율을 보였으며, 시험개시 30분 일 때 96.0%, 4시간일 때 95.1% 의 인이 제거되었다. 총질소의 경우 감람석과 제올라이트가 1:6일 때 시험개시 30분일 때 93.6%, 4시간일 때 97.4%의 질소가 제거되었다. This study was performed to develop ceramic material to be able to eliminate phosphorus and nitrogen in water. Olivine was found to remove phosphorus in aqueous phase, which was demonstrated by Lee and Choi.1) The nitrogen removal using zeolite has been demonstrated by many researchers.2,3) Hence, utilization of mixed-typed material of Olivine and Zeolite is expected to achieve simultaneous elimination of phosphorus and nitrogen in water. In this study, the removal efficiencies of T-P(Total phosphorus) and T-N(Total nitrogen) were investigated using ceramic material in batch reactor system, which was produced by incinerating after mixing Olivine and Zeolite with different ratio. The highest removal efficiency of phosphorus was achieved under the condition of 1: 2 mixing volume ratio of Olivine to Zeolite. The phosphorus of 93.6% and 97.4% (as T-P) was removed for 0.5hr and 4hr, respectively. For the nitrogen, the nitrogen removal efficiencies of 93.6% and 97.4% (as T-N) were obtained under the condition of 1:6 mixing volume ratio of Olivine and Zeolite.
최인호 ( In-ho Choi ),박영진 ( Young-jin Park ) 한국고등직업교육학회 2002 한국고등직업교육학회논문집 Vol.3 No.4
Laboratory flume experiments to investigate the characteristics of the flows and local scour around cicular shapes of bridge pier in a curved channel are performed. For the various discharge conditions, the maximum transverse bed slope is generated at the location of 150° in a curved channel. The scour depth due to a collar is about 40% of the scour depth without collar in a straight course of the flume shile it is about 44% of the scour depth without collar at the location of 150° in a curved channel. Also, when the collar is placed at the 0.1 times of water depth, the reduction of scour depth is very effective in a curved channel. As a result of using a non-symmetry collar, the ratio of non-symmerty width is 1 : 3 and the 8 degree of angle of attack are the most effective to reduce the maximum local scour depth.
최인호(Choi, In-Ho) 한국산학기술학회 2012 한국산학기술학회논문지 Vol.13 No.5
본 논문은 항공전자장비의 구조해석을 통한 하우징과 인쇄회로기판의 해석과 설계에 관한 것으로 대기자료 컴퓨터 개발 사례를 통한 연구결과이다. 항공기에 장착되는 전자장비는 전기적인 특성 외에도 운용환경에 따른 구조 설계가 매우 중요하고 설계 단계에서부터 해석을 통한 입증이 되어야 한다. 본 연구에서는 장착되는 항공 장비의 응 력과 진동 요구도를 분석하여 해석 결과를 통하여 설계에 적용하고 요구도에 대해서 입증하는 방법에 대한 것이다. 구조 해석은 상용 소프트웨어를 사용하였으며 하우징의 내부 리브 설계에 대한 적합성을 확인하고 인쇄회로 기판의 변위를 계산하여 전자 부품 배치에 활용하는 방법에 대해서 제시하였다. This paper is about the analysis and design of avionics equipment's housing and PCB(Printed Circuit Board) such as air data computer. Avionics equipment's structural design as well as electrical properties is very critical and should be proved from design phase by analysis method. First, analyze the static load and vibration requirement for the installed equipment, and then proved it satisfy with its requirement using the computational structural analysis. Commercial tools were used for computation and the rib design of housing was verified and the placement of electrical component was proposed using the PCB's local displacement information.
운전자 졸음 추론을 위한 머리포즈 및 눈 깜빡임 추적기반 은닉 마르코프 모델
최인호(In-Ho Choi),김용국(Yong-Guk Kim) 한국HCI학회 2014 한국HCI학회 학술대회 Vol.2014 No.12
본 논문은 운전자의 머리포즈 추정과 눈동자 깜빡임 검출 결과를 Hidden Markov Model(HMM)을 통해 졸음운전을 판단하는 시스템을 제안한다. 머리포즈 추정은 Corner detection 으로 특징점을 검출하여 Optical flow 로 추적한 후 POSIT 알고리즘으로 포즈를 추정한다. 눈동자 깜빡임 검출은 적분 투영함수(IPF)를 이용하여 검출한다. 추정된 머리포즈 중 Yaw 와 Pitch 의 값과 깜빡임을 HMM 모델을 통해 현재 운전자의 피로도 상태를 예측하여 이를 통해 졸음운전을 판단한다. 제안하는 시스템은 실시간으로 운전자의 졸음상태를 판단하는 결과를 도출하였다. This paper proposes the system to decide the drowsiness drive by Hidden Markov Model (HMM) using the head-pose-estimation and eye blink. Head-Pose-Estimation is using the Corner detection, Optical flow and POSIT algorithm. Eye blinked is detected by integral projection function (IPF). HMM predicts the driver’s tiredness condition using yaw, pitch and eye blink. Yaw and pitch is the value estimated on head pose. We can predict the driver’s tiredness condition. This system decides the drowsiness condition of drivers on the real-time.