http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
채윤경,조일인,임창훈,Yoon-Kyoung, Chae,II-In, Jo,Chang-Hoon, Im 통신위성우주산업연구회 2001 Joint Conference on Satellite Communications Vol.2001 No.-
본 논문에서는 이동 중에 차량에서 위성 방송뿐만 아니라 위성 인터넷을 수신함으로써, 각종 멀티미디어 서비스를 제공 받을 수 있는 이동 방송/통신위성 수신 안테나 시스템에 대하여 기술한다. 안테나는 시스템 전체 높이를 고려하여 $30^{\circ}$ 경사 빔을 갖는 한 쌍의 8x8 수평 편파 안테나를 사용하였다. 하나의 안테나 이득은 23.5 dBi이고, 전력 반치폭은 앙각 $11^{\circ}$/ 방위각 $8^{\circ}$이다. 안테나에 수신된 위성 신호는 빔 형성 블록에서 수신기 입력 신호와 추적 신호로 분리되고, 각각 독립적으로 주파수 하향변환된 후 수신기와 제어부로 전달된다. 개발된 안테나 시스텡은 앙각 방향 대해서 $45^{\circ}$$\pm$$5.5^{\circ}$의 추적 범위를 갖고, 방위각 방향에 대해서 $360^{\circ}$전방위 추적을 수행한다. 방위각 방향 추적 방식은 전자적 순차 빔 비교에 의한 기계적 추적 방식이다. 추적 속도는 $60^{\circ}$/sec이고, 추적 손실은 0.5dB로 양호한 특성을 얻었다. 개발된 안테나 시스템의 field test 결과, 방송위성 수신시 C/N = 13.5 dBi, 통신위성 수신시 C/N = 12.5 dBi로 양호한 특성을 얻었다. This paper describes mobile DBS/CS receiving antenna system which receives satellite broadcasting and satellite internet on the way of moving. With the antenna system, various kinds of multimedia service can be provided from satellite. A couple of horizontally polarized 8x8 Yagi-like patch array antenna with $30^{\circ}$ squinted beam has been used in consideration of the height of the whole antenna system. The gain of each antenna is 23.5dBi and it has HPBW of $11^{\circ}$ elevational angle and $8^{\circ}$ azimuthal angle. The receiving signal at antenna is divided between input signal and tracking signal at beam forming block. The each divided signal is transmitted to correspondent down converter set-top box or control unit. The developed antenna system has the tracking range of $45^{\circ}$$\pm$$5.5^{\circ}$ in the direction of elevation angle and $360^{\circ}$ in the direction of azimuth angle. The mechanical tracking method so called electrically sequential lobe comparison method has been adopted to trace azimuth angle. The tracking speed is $60^{\circ}$/sec and the loss during tracking is 0.5d8. Field test has been performed to measure the quality of the developed antenna system. The test result showed C/N of 13.5dB when receiving BS and 12.5dB when receiving CS.
RFID 측정 시스템을 위한 고이득 원편파 야기 배열안테나 설계
채윤경(Yoon-Kyoung Chae),이주(Li-Shu),신애령(Ai-Ling Shen),이형진(Jiong-Chen Li),안병철(Bireng-Chearl Ahn) 한국정보기술학회 2017 한국정보기술학회논문지 Vol.15 No.4
In this paper, a high-gain circularly-polarized Yagi array antenna is designed for implementing a UHF RFID measurement system. The proposed antenna consists of a common square reflector, four Yagi elements and a feed network. A single Yagi element consists of a common square reflector, a folded dipole fed by electromagnetic coupling with a strip line, and 11 directors. The circularly-polarized wave is obtained by installing four Yagi elements at 90° intervals on the common square reflector and by providing sequentially 90° phase delays. The directors are fastened on the aluminum mast by bolting to obtain mechanical firmness. The feed network consists of three commercial 90° hybrid coupler and one 90° phase delay line for realizing circularly-polarized waves. The optimal designed antenna is fabricated and measured for verifying its performances. The fabricated antenna has shown that it has a reflection coefficient of less than –15dB, a circular polarized gain of greater than of 15dBic, a half power beamwidth around 30° and an axial ratio of less than 1dB.
Design of a Ceramic Patch Antenna for Artillery Projectile Positioning Applications
Yoon-Kyoung Chae(채윤경),Chan-Ho Lee(이찬호),Jae-Ho Cha(차재호),Wan-Joo Kim(김완주),Bierng-Chearl Ahn(안병철) 한국정보기술학회 2017 한국정보기술학회논문지 Vol.15 No.5
This paper presents a compact circularly-polarized patch antenna used for GPS/GLONASS receptions onboard an artillery projectile fuze. The proposed antenna consists of a corner-truncated slotted ceramic patch and a small circular ground plane. Two small rectangular slots are realized on the patch for improving the circular polarization bandwidth and an additional truncation at the patch’s supper left corner is employed for enhancing the required impedance bandwidth. The designed antenna inside the fuze occupies a cylindrical space of 6-㎜ height and 36-㎜ diameter. The optimal antenna design and the analysis of effects on design parameters are carried out with Microwave StudioTM by CST. The fabricated antenna is to be installed inside a fuze radome potted with plastic foam. The fabricated antenna shows a gain of 2.5~4.2㏈ic, an axial ratio of 5.1~11.6㏈, and a reflection coefficient of less than –10㏈ at 1.57~1.62㎓.
유통·물류 적용을 위한 수동형 UHF RFID 태그의 성능 분석
노재우(Jae-Woo Noh),장리검(Li-Jian Jhang),이찬호(Chan-Ho Lee),안병철(Bierng-Chearl Ahn),채윤경(Yoon-Kyoung Chae) 한국정보기술학회 2016 한국정보기술학회논문지 Vol.14 No.12
In this paper, the performances of passive UHF RFID tags, which are ordinarily used in distribution and logistics applications, are measured and analyzed. Major factors of the performances on the tag contain a tags sensitivity S<SUB>tag</SUB>, a backscattered power ratio ηBS, a backscattered modulation depth ΔM, and a reading range in the static state and recognition ratio in the dynamic state. The measurement procedures based on theoretical approaches of these major factors are concretely presented. 20 types of tags are chosen and 30 items are randomly selected at each tag-type for enhancing the measurement reliability. It is desirable to use tags having the sensitivity of less than ±0.5 dB in comparison with the mean value of selected samples for obtaining proper reading range. Tags show high recognition ratios in the use of dynamic state, which attached on the product box far away nearby metal structures and have the modulation depth greater than 3mV.
한국형 스마트온실 내 사물인터넷(IoT) 기술 적용을 위한 무선 주파수대역별 통신환경 분석
이재수 ( Jae Su Lee ),홍영신 ( Youngsin Hong ),이현동 ( Hyun Dong Lee ),이상규 ( Sang Gyu Lee ),곽강수 ( Kang Su Kwak ),김밝금 ( Bal-geum Kim ),김태현 ( Tae Hyun Kim ),노시영 ( Si Young Rho ),채윤경 ( Yoon-kyoung Chae ),백정현 ( J 한국농업기계학회 2019 한국농업기계학회 학술발표논문집 Vol.24 No.1
본 연구에서는 한국형 스마트온실 내 사물인터넷(IoT) 기술 적용을 위해 무선통신 주파수대역별 장애요인을 점검하고 통신환경을 분석하였다. 한국형 스마트온실 내·외부 무선통신 장애요인을 분석하고자 스펙트럼 분석기를 이용하여 스마트온실 환경제어기의 게이트웨이 설치치점에서 전파 잡음레벨을 측정하였다. 측정 주요주파수는 IoT 디바이스에서 주로 사용되고 있는 무선통신 주파수대역인 900MHz와 2.4GHz 대역으로 각각 중심주파수 920MHz ± 100 MHz 및 2,440MHz ± 100 MHz 범위를 대상으로 분석하였다. 900MHz 대역의 잡음레벨 분석결과로는 이동통신 주파수대역인 864∼894MHz 및 949∼960MHz에서 이동통신 신호가 감지되었고, IoT 디바이스가 주로 사용하는 비면허 대역인 917∼923MHz에서는 전파 간섭이 없음을 확인하였다. 2.4GHz 대역에서는 Wi-Fi 신호가 2.4∼2.48GHz 전대역에서 감지되었다. 또한, 한국형 스마트온실 내부 구조물에 따른 무선통신 장애점검을 분석하기 위해 스마트온실 내 폭 방향 7지점, 길이 방향 8지점 및 높이 방향 3지점으로 총 168지점의 신호강도 데이터(RSSI)를 수집하여 통신환경을 분석하였다. 본 연구를 통해 900MHz와 2.4GHz 수신레벨의 분석결과, 전체 168개 지점의 평균 수신레벨은 각각 -62.9dBm과 -52.3dBm으로, 각 사용된 RF 모듈의 수신감도 -130dBm과 -110dBm 대비 충분한 수신레벨이 확보됨을 알 수 있었다. 송신노드가 온실내부에 설치되는 경우, 수신 노드 위치에서 수신레벨 및 수신노드의 감도를 고려하면 반경 약 200m까지는 통신이 가능한 것으로 판단된다.
기생소자를 갖는 3층 구조의 이동체탑재 위성방송수신용 마이크로스트립 배열 안테나
채윤경,최익권 충북대학교 산업과학기술연구소 2002 산업과학기술연구 논문집 Vol.16 No.1
This paper describes the design and fabrication of a 4 by 16 microstrip array antenna to be mounted on vehicles for Korea-Sat broadcast reception. Each antenna element consists of singly fed corner-truncated rectangular patch and a parasitic element located over the patch to have broadband input impedance and gain characteristics. And the 2 by 2 subarray is fed sequentially in order to make the axial ratio bandwidth wider. The fabricated antenna is measured and found to have the gain of 24.5 dBi, return loss of less than -13dB and the 3dB beamwidth of ±12 ˚ in elevation and ±3 ˚ in azimuth in the Korea-Sat broadcast frequency band of 11.7 GHz ~ 12.0 GHz. The applicability of this antenna as a vehicle mountable one is proved through the Korea-Sat broadcast receiving experiment in real environment.