http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
차헌녕(Honnyong Cha),이종필(Jong-Pil Lee),이경준(Kyung-Jun Lee),김태진(Tae-Jin Kim),유동욱(Dong-Wook Yoo) 전력전자학회 2010 전력전자학술대회 논문집 Vol.2010 No.7
본 논문은 최소의 스위칭 소자를 이용한 절연형 Full-Bridge (FB) buck-boost DC-DC 컨버터를 제안한다. 기존의 dual-bridge 방식을 이용한 buck-boost 컨버터와는 달리 본 논문에서 제안한 방식은 변압기 1차측에만 스위칭 소자를 사용하고 2차측에는 다이오드 정류기를 사용한다. 필요한 buck-boost 기능을 구현하기 위하여 입력단에 2개의 인덕터를 추가하여 2phase interleaved 방식으로 동작을 한다. 500 W 의 prototype을 제작하여 본 논문에서 제안한 방식의 타당성을 실험적으로 검증 한다.
Z-소스 인버터와 부스트 DC-DC 컨버터의 회로적인 유사성
차헌녕(Honnyong Cha),김흥근(Heung-Geun Kim),최병조(Byungcho Choi) 전력전자학회 2011 전력전자학술대회 논문집 Vol.2011 No.7
2003년에 처음 Z-소스 인버터가 소개된 후 이와 관련된 많은 연구결과물들이 현재 학계에 소개 되고 있다. 본 논문은 최근 산업계에서 이슈화 되고 있는 Z-소스 인버터와 최근 개발된 몇 가지 Z-소스 인버터들을 소개하고 이러한 Z-소스 인버터들이 기존의 부스트 DC-DC 컨버터들과 많은 회로적인 유사성을 가지고 있음을 소개한다. 이를 통해 Z-소스 인버터의 동작원리를 좀 더 자세히 이해하고 전력전자를 공부하는 신진 연구자들에게 새로운 Z-소스 인버터를 개발할 수 있는 기회를 제공하고자 한다.
양극성 DC 배전 시스템 적용을 위한 결합 인덕터 기반의 전압 밸런싱 이중 출력 CLL 공진형 컨버터
이승훈,김정훈,차헌녕,Lee, Seunghoon,Kim, Jeonghun,Cha, Honnyong 전력전자학회 2022 전력전자학회지 Vol.27 No.4
A bipolar DC distribution system suffers from an imbalance in voltages when asymmetric loads are connected at the outputs. Dedicated voltage balancers are required to address the imbalance in bipolar voltage levels. However, additional components eventually increase the cost and decrease the efficiency and power density of the system. Therefore, to deal with the imbalance in output voltages without adding any extra components, this study presents a coupled inductor-based voltage balancing technique with a dual-output CLL resonant converter. The proposed coupled inductor does not require extra magnetic components to balance the output voltages because it is the result of resonant inductors of the CLL tank circuit. It can also avoid complex control schemes applied to voltage balancing. Moreover, with the proposed coupled inductor, the CLL converter acquires good features including zero voltage and zero current switching. Detailed analysis of the proposed coupled inductor is presented with different load conditions. A 3.6-kW hardware prototype was built and tested to validate the performance of the proposed coupled inductor-based voltage balancing technique.
류명효(Myunghyo Ryu),차헌녕(Honnyong Cha),백주원(Juwon Baek),유동욱(Dongwook Yoo) 전력전자학회 2005 전력전자학술대회 논문집 Vol.- No.-
In this paper, the electrical characteristics of the non-contact transformer is presented using conventional coupled inductor theory. In high power applications, the non-contact transformer is so bulky and heavy that it poses some maintenance problems. Therefore it should be divided into some light transformer modules. This paper shows the analytic method of how to measure the parameters of the multiple connected non-contact transformer. The analytical results are verified through measurement.
인터리브드 PWM 컨버터에서의 Coupled Inductor 해석
신동설(Dongsul Shin),차헌녕(Honnyong Cha),이종필(Jong-Pil Lee),유동욱(Dong-Wook Yoo),김희제(Heeje Kim) 전력전자학회 2011 전력전자학술대회 논문집 Vol.2011 No.7
The interleaving method is usually used to reduce the ripple of output current of filter inductor in parallel operation of PWM DC/DC converter. Although the current ripple of filter inductor decreases, each current ripple of filter inductor is not decreased. In this study, the operation of interleaved buck converter with coupled inductor is analyzed in each operation mode. It is verified through experiment. The possibility of application to grid connected inverter with parallel operation is identified.