http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조홍제(Hong-Jae Cho),문종규(Jong-Kyu Moon) 한국암반공학회 2010 터널과지하공간 Vol.20 No.3
울산 태화강 지류인 대곡천변에 선사시대 암각된 것으로 추정되는 반구대 암각화와 천전리 각석이 있다. 이들 암각화군은 중생대 백악기 퇴적암인 셰일면에 새겨져 있어 6000여년 동안 비바람에 풍화되어 풍화 5등급을 넘어 지금은 박리가 되고 있는 상태이다. 더욱이 반구대 암각화는 하류 사연댐의 수몰지구내에 존재하므로 45년 동안 1년 중 168일간은 물속에 잠겨있는 상태를 반복하여 왔다. 본 연구는 암각화군의 공학적 상태를 점검하여 암각화 본체의 강도증진과 풍화정지를 위한 대안을 제시하려는 목적으로 연구를 진행하였다. It has been presumed that Bangudae-petrogram and Chunjonri-petrogram have been sculptured along the river Taewha in the prehistoric age. These petrograms have been sculptured on shale, the sedimentary rock of cretaceous in Mesozoic era and have been weathered by wind and rain for around 6000 years, resulting in weathering grade 5. Specially, Bangudae-petrogram has been in submerged zone in Sayeon dam for 168 days a year and the submersion has been repeated for 45 years up to date. This paper adopts an engineering approach to these petrograms' properties and discuss how to enhance strengths of petrograms themselves and stop weathering.
박재홍,한건윤,조홍제,Park, Jae-Hong,Han, Kun-Yeun,Cho, Hong-Je 한국수자원학회 1994 물과 미래(한국수자원학회지) Vol.27 No.4
사행특성을 가진 복합하도에서의 홍수파해석을 위하여 사행도 모형을 개발하였다. 사행도 모형을 지배 방정식, 질량보존 오차 및 홍수파 해석 등을 통하여 기존의 세가지 홍수터 모형과 비교하였다. 사행도 모형에 의한 오차는 1.5-1.8% 정도로 나타났으나 분리하도 모형의 경우에는 1.5, 2.0의 사행도에서 각각 9.1, 27.4%로 큰 오차가 발생하였다. 사행도 모형은 홍수터를 가진 사행하도에서의 홍수전달 특성해석을 위하여 적용되었다. 사행도 모형에 의한 수치실험 결과, 홍수터의 조도와 홍수터의 하폭이 증가할수록, 사행도가 감소할수록 감쇠비와 유하시간비는 증가하였다. 본 모형은 보합하도 단면을 가지며 사행하는 국내 하천에서의 부정류 해석에 적용성이 클 것으로 판단되었다. The sinuosity model has been developed to simulate to developed to simulate the floodwave in meandering channels by solving the extended Saint-Venant equation with the Preissmann scheme. The suggested model is compared with three conventional floodplain routing methods in terms of governing equations, mass conservation error and floodwave analysis. The sinuosity model produces the mass conservation error of 1.5-1.8%, however the separate channel model produces 9.1% and 27.4% for sinuosity of 1.5 and 2.0, respectively. The model has been used to simulate flow in an idealized meandering river with a floodplain. The attenuation ratio and the travel time ratio are found to increase as the floodplain roughness and width increase and as the sinuosity factor decreases. The model is expected to contribute the floodwave analysis in sinuous channel with compound corss sections.
재활용 PET(polyethylene terephthalate)를 이용한 PBT(polybutylene terephthalate)올리고머 제조
조민정 ( Min Jeong Cho ),양정인 ( Jeong In Yang ),노승현 ( Seung Hyun Noh ),조홍제 ( Hong Jae Joe ),한명완 ( Myung Wan Han ) 한국화학공학회 2016 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.54 No.4
재활용 PET (Poly ethylene terephthalate)로부터 PBT (Poly butylene terephthalate)를 생산할 수 있는 새로운 방법을 모색하였다. 이 방법은 PET와 BD (1,4-butanediol)의 에스테르 교환반응을 통하여 BHBT (Bishydroxybutylterephthalate)올리고머를 생성하는 글리콜리시스 반응과 BHBT의 축합 중합 반응을 통하여 PBT 올리고머를 생성하는 축중합 반응으로 이루어져 있다. 이를 통해 단기 수명 주기 제품인 버려지는 PET 페자원을 장기 수명 주기 제품인 PBT로 변환시켜 더 가치 있고 바람직한 재활용을 하고자 하였다. 본 연구에서는 글리콜리시스와 축중합 촉매로 zinc acetate를 사용하였고, 글리콜리시스 반응에 대하여 회분식 반응기와 반 회분식 반응기를 적용하여 성능을 비교하였다. 이를 위하여 생성되는 에틸렌글리콜(EG)의 양을 정량하여 해중합도를 추정할 수 있는 EG 수율과 부산물인 THF 생성량을 성능 척도로 하였다. 반응 도중에 EG를 제거하는 반회분식 반응기의 성능이 회분식 반응기에 비하여 보다 우수한 것으로 나타났다. 또한 반회분식 반응기의 경우 최적의 반응조건은 BD/PET 비율 4, 반응온도 220 oC 이었으며, 최고 EG 수율은 91% 이었다. 또한 축 중합 반응이 진행됨에 따라 PBT 올리고머의 분자량이 증가하는 것을 보였다. A new route for PBT (Poly butylene terephthalate) production from recycled PET (Poly ethylene terephthalate) has been explored. The route consists of glycolysis of PET (Poly ethylene terephthalate) wastes using 1,4-butandiol into BHBT oligomers and polycondensation of the oligomers into PBT oligomer. This process uses post-consumer or post-industrial recycled PET and converts it into high-end PBT type engineering thermoplastic via a chemical recycling process. Zink acetate was used as a catalyst for both glycolysis and polycondensation. Two types of reactor for the glycolysis, batch and semi-batch reactor, were investigated and their performances were compared. Semi-batch reactor removes ethylene glycol (EG) and THF (tetrahydrofuran) during the reaction. Amounts of EG and THF generated during the glycolysis reaction were measured and used as criteria for the reactor performance. Performance of semibatch reactor was shown to be better than that of batch reactor. Optimum reaction condition for the semi-batch reactor was BD/PET ratio of 4, and reaction temperature of 220℃, giving high EG yield (max 91%) and low production of THF. In addition, it was confirmed that the molecular weight of PBT oligomer increases in accordance with the progress of the polycondensation reaction.
박재희,김정식,조홍제,문성준 대한상하수도학회 2000 상하수도학회지 Vol.14 No.2
The effect of the intercepting ratios on the water quality improvement was simulated by using Finite Segment Method in a urban river where intercepting sewer under the ground and constructing sewage treatment plant are now being proceeded. To simulate variations of the water quality caused by river flows, rating curve at each gaging station was derived from measurements. Water quality data were from the existing observations at each key stations from 1990 to 1998, for 1999 and 2000 data we measured in creek and drainage ditch in addition to observation stations. It revealed that increasing the intercepting ratios improved the water quality.