http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
[EMC 관련 최근 기술 동향]Measurement Distances for Radiated Emission under In-Situ Measurement Conditions
조원서(Won-Seo Cho) 한국전자파학회 2005 전자파기술 Vol.16 No.4
The CISPR/H/WG4 takes charge of a new generic emission standard for in-situ measurements. The new generic standard will cover all types of equipment which for what so ever reasons can not be tested in standardized test sites and for which provisions for in-situ testing are not covered by the appropriate product standards(e.g. equipment covered by CISPR 11 and CISPR 22). One of CISPR/H/WG4 tasks is to check which measurement distances shall be used depending on the condition of the case. In this document, the measurement distances under the in-situ condition of cases specified in the standards are explained and a new measurement distance with height dependent concept is proposed.
디지털 변조 전자기파 방사에 의한 전자기기에 미치는 영향
조원서(Won-Seo Cho),곽필근(Phil-Keun Kwak),박창열(Chang-Yeol Park),양준규(Jun-Kyu Yang),금홍식(Hong-Sik Geum) 한국전자파학회 2011 한국전자파학회논문지 Vol.22 No.2
현대 이동 통신 기술의 급격한 발전과 함께 800 ㎒ 이상의 주파수 대역에서는 다양한 디지털 변조 방식에 의한 기술이 서비스되고 있다. 그러나 국내에서는 전자기파 방사의 영향에 대한 특별한 검토나 연구가 없이 IEC 61000-4-3에 기반한 방사 내성 시험이 AM 신호로만 수행되고 있으며, 광대역 디지털 변조 신호나 cdmaone(IS-95)나 WCDMA 접속 방식에 의한 PM 신호로는 시험되지 않고 있다. 본 연구는 전자기파 방사 내성 시험의 기술 표준을 검토하여, 국내 전파 환경에 적합한 인가 신호를 분석하고 시험하기 위해 수행되었다. 연구 결과로는 AM 신호보다 PM 신호나 디지털 변조 신호 인가 시, 더 큰 영향을 받는 것으로 확인되었다. 본 연구 결과는 국내 통신 기술의 환경에 맞는 정확하고 합리적인 방사 내성의 평가를 위해서는 단편적인 접근이 아닌 대역폭, 물리 채널, 변조 기술, 출력 전력 및 다중화에 의한 신호 등의 복합적 검토와 심층적 연구가 필요함을 보여준다. With the rapid development of mobile communication technology, the technologies based on the diverse digital modulation schemes have been used for the frequency range of over 800 ㎒. The only radiation immunity has been tested using only AM signal based on IEC 61000-4-3 without any consideration of the influence of electromagnetic radiation in Korea. However, it has not been tested by wideband digital modulation signals such as cdmaone(IS-95), WCDMA and PM signal. The purpose of this study was to review the standards. In addition, the input signals were analyzed and tested considering the environments in Korea. The results showed that the devices were influenced by digital modulation signal or PM signal more than by AM signal.
전기로산화슬래그를 활용한 콘크리트의 차폐효과 측정 방법의 유효성 검증 연구
장홍제(Hong-Je Jang),이한희(Han-Hee Lee),최효식(Hyo-Sik Choi),송태승(Tae-Seung Song),조원서(Won-Seo Cho) 한국건설순환자원학회 2021 한국건설순환자원학회 논문집 Vol.9 No.4
본 논문에서는 버려지는 전기로산화슬래그를 재활용하여 차폐용 콘크리트를 제작하는데 있어 필요한 차폐효과 측정방법에 대하여 연구하였다. 차폐용 콘크리트 블록의 전자파 차폐효과를 측정하기 위한 시스템의 결과와 실제 콘크리트로 구축된 건축물의 차폐효과를 비교하여, 소형화된 콘크리트 블록의 전자파 차폐효과 측정 시스템의 유효성을 검증하였다. 콘크리트 건축물의 크기는 2.9 x 2.9 x 3.4m이고 콘크리트 블록은 0.3 x 0.3 x 0.2m로 차폐효과 측정 방법은 MIL-STD-188-125-1을 준용하였다. 비교하여 위하여 사용되는 주파수 대역은 600MHz - 2GHz이고 비교되는 콘크리트의 구성은 일반적인 콘크리트와 전기로산화슬래그가 포함된 콘크리트이다. 콘크리트 구조물의 경우에는 구조적 안전성을 위하여 철근이 15cm 간격으로 설치되어 있지만, 철근의 전자파 특성을 주파수가 증가할수록 차폐효과 특성이 점점 감소하기에 두 비교대상의 측정결과에서 약간의 차이가 발생하였다. 결론적으로는 콘크리트 블록을 통한 차폐효과 측정결과는 건축물을 만들었을 때의 결과와 유사하여, 전자파 엔지니어링 설계에 충분히 활용할 수 있을 것으로 생각되고 표준시편을 활용한 콘크리트의 차폐효과 측정 시스템이 유효함을 검증하였다. In this paper, methods for manufacturing shielding concrete by recycling steelmaking slag discarded as industrial waste and measuring the shielding effectiveness of the shielding concrete were studied. By comparing the result of shielding effectiveness measurement of this concrete block with shielding effectiveness measurement of the structure constructed with this concrete, the measurement system for measuring shielding effectiveness of the concrete block was verified. The size of the concrete structure is 2.9 x 2.9 x 3.4m and the concrete block is 0.3 x 0 .3 x 0 .2m. The frequency b and used for mesurement is 600MHz - 2GHz, the types of concrete used to measure the shielding effectiveness are general concrete and concrete containing electric arc furnace oxidizing slag. In the case of the concrete structure, reinforcing rebars are installed at intervals of 15cm for structural safety, as the frequency increase, the electromagnetic wave properties of rebars gradually decreased, there was a slight difference in the measurement results. In conclusion, the measurement result of shielding effectiveness of the concrete block is similar to the result of the concrete structure. It is thought that it can be sufficiently utilized for electromagnetic wave engineering design, and the concrete shielding effectiveness measurement system using standard specimens was verified.