http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
항공기 진동에 대한 광학 탑재 장비 구조 안정성 및 광학 성능 분석
조문신(Mun Shin Jo),김상원(Sang Won Kim) 대한기계학회 2017 大韓機械學會論文集A Vol.41 No.9
광학 탑재 장비는 다수의 광학 부품 및 검출기로 구성되며 목표물 탐지와 분류를 목적으로 항공기, 전차 및 군함에 탑재되어 운용된다. 수 km 고도에서 운용되는 항공용 광학 탑재 장비는 항공기에서 발생하는 진동 때문에 구조 안정성과 광학 성능 저하가 발생한다. 설계 단계에서 진동 환경조건에 대한 탑재 장비의 구조 안정성 및 광학 성능 검증이 요구된다. 본 연구에서는 진동 환경조건을 시험 표준 규격서와 항공기에서 발생하는 진동을 측정하여 분석하였다. 진동 환경조건은 구조 안정성 검증을 위한 내구도 진동조건과 광학 성능 검증을 위한 운용 진동조건으로 구분하였다. 구조 안정성을 고유진동수해석, 내구도 진동 응답해석 및 정해석을 통해 검증하였다. 광학 성능을 운용 진동 응답해석 결과를 광학 설계/분석 프로그램에 적용하여 검증하였다. Optical equipment consists of various components, and a detector is mounted and operated on aircraft, tanks, and warships for target detection and classification. The structural stability and optical performance of aeronautical optical equipment operated at several kilometers of altitude are degraded owing to vibration generated in the aircraft. It is necessary to verify the structural stability and optical performance requirements of the equipment in vibration environment conditions during the design phase. In this study, vibration environment conditions were analyzed using a test standard and the measurements of the vibration generated in aircraft. The conditions were classified as endurance and operating vibration conditions for structural stability and optical performance verification, respectively. The structural stability was verified according to natural frequency analysis, response analysis for the endurance vibration condition, and static analysis. The optical performance was verified by applying the vibration response analysis results to the optical design/analysis program.
셔터렌즈에 의한 검출기 불균일 보정을 적용한 이중배율 적외선 카메라 설계
안규봉,김서현,정재철,조문신,김창우,김현숙,Ahn, Gyou-Bong,Kim, Seo-Hyun,Jung, Jae-Chul,Jo, Mun-Shin,Kim, Chang-Woo,Kim, Hyun-Sook 한국광학회 2007 한국광학회지 Vol.18 No.2
완전한 2차원 배열을 갖는 중적외선 대역의 $320\times240$ 검출기를 사용하는 3세대 열상 장비의 설계 및 제작은 이차원 배열 검출기 제작 기술의 발달과 영상 신호처리 기술의 진전으로 인해 최근 더욱 더 활발히 이루어지고 있다. 본 논문은 다양한 응용 분야에서 적외선 센서로 사용될 수 있도록 하기 위하여 소형 경량화 제작을 목표로 한 3세대 열상장비의 이중 배율 적외선 카메라의 설계와 Defocus용 셔터 렌즈에 의한 영상기반 불균일 보정 방식에 대해 다룬다. This paper describes the design technology for a third generation thermal imaging system, which is more compact than before, using a $320\times240$ mid-IR focal plane detector. The third generation non-scanning thermal imaging system was constructed as a compact thermal imaging module as a reconnaissance, surveillance and navigation sensor for helicopter and infantry vehicles in the $1980's\sim1990's$ and now, we designed a new compact infrared camera and studied a new type of non-uniformity correction lens fer this camera.