http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
중위수를 이용한 새로운 간섭 공분산 행렬의 예측이 적용된 Space-Time Adaptive Processing의 성능 분석
강성용(Sungyong Kang),정지채(Jichai Jeong) 대한전기학회 2009 정보 및 제어 심포지엄 논문집 Vol.2009 No.10
본 논문은 먼저 space-time signal processing (STAP)의 신호와 실제 환경인 불균일한 클러터 환경을 제시하고 이를 극복하고자 연구된 nonhomogeneity detector (NHD)의 사용 이후에도 일어나는 심각한 성능 저하를 극복하고자 중위수를 이용한 간성 공분산 행렬의 새로운 예측방법을 제시하였다. 또한 시뮬레이션을 통하여 signal to interference plus noise ratio (SINR) 손실을 계산하여 제시된 방법이 평균값으로 정의된 기존의 방법보다 더 좋은 성능을 보임을 확인하였다.
중위수를 이용한 새로운 간섭 공분산 행렬의 예측이 적용된 Space-Time Adaptive Processing에 대한 연구
강성용(Sungyong Kang),정지채(Jichai Jeong) 한국전자파학회 2010 한국전자파학회논문지 Vol.21 No.1
본 논문은 space-time signal processing(STAP)의 신호 모델과 불균일한 클러터 환경을 제시하고 이를 극복하고자 연구된 nonhomogeneity detector(NHD)의 사용 이후에도 일어나는 심각한 성능 저하를 극복하고자 중위수(median)를 이용한 간섭 공분산 행렬의 새로운 예측 방법을 제시하였다. 또한 대각 로드(diagonal loading)를 적용하여 고유값(eigen value) 특성을 개선시켰으며 signal to interference plus noise ratio(SINR) 손실을 계산하여 비교하였다. 마지막으로 modified sample matrix inversion(MSMI) 통계량으로 목표물 검출 능력을 비교한 결과 제시된 방법이 평균값(average)으로 정의된 기존의 방법보다 우수한 성능을 보임을 확인하였다. In this paper, we presented a signal model of STAP and actual environment of clutter. The novel estimation method of clutter covariance matrix using median value is proposed to overcome serious performance degradation after NHD in nonhomogeneous clutter. Eigen value characteristic is improved through diagonal loading. Target detection ability and SINR loss of the proposed method though MSMI statistic is also compared with conventional method using average value. The simulation results, confirm the proposed method has better performance than others.
스위칭 트랜지스터를 이용하여 2.4/3.5/5.2 ㎓에서 동작하는 다중 대역 저잡음 증폭기 설계
안영빈(Youngbin Ahn),정지채(Jichai Jeong) 한국전자파학회 2011 한국전자파학회논문지 Vol.22 No.2
본 논문에서는 2.4, 3.5, 5.2 ㎓의 대역에 맞추어 스위칭 동작을 하는 다중 대역 저잡음 증폭기를 CMOS 0.18 ㎛ 공정을 이용하여 설계하였다. 제안된 회로는 스위칭 트랜지스터를 이용하여 입력단에서는 트랜스 컨덕턴스, 게이트-소스 캐패시턴스를 조정하고, 출력단에서는 캐패시턴스를 조정하는 방식으로 다중 대역 입출력 정합을 이루었다. 제안된 저잡음 증폭기는 각 스위칭 트랜지스터의 동작 상태에 따라 2.4, 3.5, 5.2 ㎓ 대역에서 제안된 회로는 입출력단에서 각각 14.2, 12, 11 ㏈의 이득과 3, 2.9, 2.8의 잡음 지수 특성을 갖는다. 다중 대역 저잡음 증폭기는 1.8 V의 공급 전압에 대해서 4.2~5.4 ㎽의 전력을 소비한다. This paper presents a multi-band low noise amplifier(LNA) with switching operation for 2.4, 3.5 and 5.2 ㎓ bands using CMOS 0.18 ㎛ technology. The proposed circuit uses switching transistors to achieve the input and output matching for multi-band. By using the switching transistors, we can adjust the transconductance, gate inductance and gatesource capacitance at input stage and total output capacitance at output stage. The proposed LNA exhibits gain of 14.2, 12 and 11 ㏈ and noise figure(NF) of 3, 2.9 and 2.8 ㏈ for 2.4, 3.5 and 5.2 ㎓, respectively.