http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정재윤(Jae Yoon Jeong),이동준(Dong Jun Lee),허정원(Jungwon Heo),임두현(Du-Hyun Lim),서양곤(Yang-Gon Seo),안주현(Jou-Hyeon Ahn),최창호(Chang-Ho Choi) 한국청정기술학회 2020 청정기술 Vol.26 No.2
기존의 석유계부산물 기반 음극재의 대체물질을 개발하고자, 친환경적이며 가격이 저렴한 대나무 기반 1차 탄화숯을 저온 흑연화 공정을 통해 흑연으로 전환 후 음극재로 활용하였다. 저온 흑연화 공정을 위해 탄화철을 촉매로 사용하였으며, 첨가된 탄화철의 양에 따라 흑연화 정도를 X선 회절기(x-ray diffraction, XRD), 라만 분광기(raman spectroscopy), TEM (transmission electron microscopy)을 사용하여 분석 한 후 탄화철의 최적 양을 결정하였다. 가스흡착법 (brunauer-emmett-teller, BET)를 사용하여 흑연화 숯의 기공특성도 분석하였다. 분석 결과 촉매 표면을 중심으로 비정질의 탄소가 흑연으로 전환되었으며, 흑연화 공정 후 촉매를 제거하기 위해 산 처리를 하는 동안 기존의 1차 탄화숯보다 크기가 큰 기공이 형성되어 상대적으로 표면적이 줄어들었다. 최적 양의 촉매를 사용하여 제조된 흑연화 숯을 음극재로 활용하여 전지성능을 분석한 결과 1차 탄화숯과 비교하여 방전용량과 충방전 효율이 증가하였다. 이는 흑연화 공정으로 비정질의 탄소가 흑연으로 전환되었기 때문으로 추정되며, 전지성능을 더욱 향상시키기 위해서는 탄화철 촉매의 크기를 최대한 작게 조절하고, 흑연화 숯의 입자크기를 균일화 하는 연구가 필요할 것으로 사료된다. Biomass bamboo charcoal is utilized as anode for lithium-ion battery in an effort to find an alternative to conventional resources such as cokes and petroleum pitches. The amorphous phase of the bamboo charcoal is partially converted to graphite through a low temperature graphitization process with iron oxide nanoparticle catalyst impregnated into the bamboo charcoal. An optimum catalysis amount for the graphitization is determined based on the characterization results of TEM, Raman spectroscopy, and XRD. It is found that the graphitization occurs surrounding the surface of the catalysis, and large pores are formed after the removal of the catalysis. The formation of the large pores increases the pore volume and, as a result, reduces the surface area of the graphitized bamboo charcoal. The partial graphitization of the pristine bamboo charcoal improves the discharge capacity and coulombic efficiency compared to the pristine counterpart. However, the discharge capacity of the graphitized charcoal at elevated current density is decreased due to the reduced surface area. These results indicate that the size of the catalysis formed in in-situ graphitization is a critical parameter to determine the battery performance and thus should be tuned as small as one of the pristine charcoal to retain the surface area and eventually improve the discharge capacity at high current density.
다중 사이버 보안 AI 모델을 이용한 침해위협 탐지와 ELK 기반 대응 시각화에 대한 연구
이인재 ( In-jae Lee ),박찬웅 ( Chan-woong Park ),권오준 ( Oh-jun Kwon ),정재윤 ( Jae-yoon Jung ),김채은 ( Chae-eun Kim ),한영우 한국정보처리학회 2023 한국정보처리학회 학술대회논문집 Vol.30 No.2
최근 많은 기업체들은 점점 고도화되고 있는 사이버 공격 위협에 대응하기 위해 다양한 보안 솔루션 도입 및 종합적인 네트워크 보안 분석을 수행하고 있다. 하지만 보안 영역에 많은 자원과 예산을 투입할 여력이 없는 중소형 업체들은 특히 침해위협 탐지와 대응 결과 시각화에 대한 어려움을 겪고 있다. 이에 따라 본 연구에서는 다중 사이버 보안 AI 모델 구현을 통해 다각도의 사이버 침해위협 발생 가능성을 예측하고, 추가적으로 오픈소스 기반의 ELK 플랫폼을 통한 대응 결과 시각화를 구현하고자 한다.
황하청,정종문,김정현,김동준,봉재환,정재윤,구제환,조광섭,Hwang, Ha-Chung,Jeong, Jong-Mun,Kim, Jung-Hyun,Kim, Dong-Jun,Bong, Jae-Hwan,Chung, Jae-Yoon,Koo, Je-Huan,Cho, Guang-Sup 한국진공학회 2008 Applied Science and Convergence Technology Vol.17 No.6
나트륨(Na) 함유량이 다른 세 종류의 유리관인 Borosilicate($Na_2O$ 4%), Soda-Lime($Na_2O$ 14%), 그리고 Aluminosilicate($Na_2O$ 0.06%) 유리관의 방전 실험을 통하여 유리관 내벽의 흑화를 관측하였다. 수은 혼합기체(Ne+Ar+Hg)의 방전에서 나트륨 함유량이 많은 유리관일수록 흑화가 심하게 나타난다. 무수은 가스(Ne+Ar)의 방전에서는 흑화가 나타나지 않는다. 나트륨 함유량이 많은 수은 방전 램프에서 봉입 기체의 압력이 작을수록 흑화의 정도가 커진다. 흑화 방지재를 도포한 유리관은 흑화가 미약하게 나타난다. 이 실험을 통하여 흑화는 유리재의 나트륨 성분과 수은 이온의 결합에 의한 아말감($NaHg_2$)이 유리관 내벽에 형성된 것으로 분석된다. The different degrees of blackening were observed at the inner surface of borosilicate, soda-lime, and aluminosilicate glass tubes having different sodium (Na) contents. The sodium contents ($Na_2O$) within the borosilicate, soda-lime, and aluminosilicate glass tubes were found to be 4%, 14%, and 0.06%, respectively. The degree of blackening was shown to increase as the sodium content within the glass of the fluorescent lamp containing Ne+Ar+Hg gas mixture. Higher degree of blackening was observed from the inner surface of the glass tube coated with $Y_2O_3$. The blackening was found to be originated from the amalgam of $NaHg_2$ generated by the chemical reaction between the mercury ions within the discharge gas and sodium within the glass tube during operation.
흉요추 및 요추 Denis 제B형 방출형 골절의 전방 추체 상반부 절제 및 일개분절 유합술에 의한 치료
정재윤,김형석,이준엽 대한척추외과학회 1998 대한척추외과학회지 Vol.5 No.2
Study design : The authors is to report the clinical and radiological results of proximal half corpectomy with one motion segment fusion in Denis type B burst fracture. Objectives : To evaluate the efficacy of proximal half corpectomy in Denis type B burst fracture of the thoracolumbar and lumbar spine. Summary of Literature review : For the operative management of burst fracture, various methods including posterior ligamentotaxis, posterolateral decompression, anterior decompression or combined were reported. Among the methods, anterior decompression by the corpectomy of fractured vertebral body and fusion with or without instrumentation is the one of the widely accepted method of treatment. However, anterior decompression by excision of whole vertebral body has the disadvantage of high complication rate due to the instability from the large defect and long length of bone graft. Moreover, two motion segments have to be sacrified, which is very important especially in thoracolumbar and lumbar area. Material and methods : 43 cases operated from 1989 to 1996 and the minimum follow up period was two years and compared with that of 48 cases who were treated by total corpectomy and two motion segment fashion from 1986 to 1989. Results : Solid bony union was obtained in 43 cases within 6 months and no back pain was complained in 39 cases (93%) at last follow up. There was no significant difference between two groups in correction of anterior vertebral height and kyphotic angle. Length of bone graft was 3.0㎝ in half corpectomy group and was f .3cm in total corpectomy group. Hardward breakage or graft collapse was not observed in proximal half corpectomy, while there were 5 cases in total corpectomy. Conclusion : Proximal half corpectomy and fusion of one motion segment in Denis type B burst fracture is believed to be a successful method which can minimize the fused level, increase the stability, preserve motion segment and reduce the complication.