http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정자혜 ( Jung Jahe ),권오일 ( Kwon Oil ),이종현 ( Lee Jong-hyun ),박병석 ( Park Byung-suk ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.1
앵커로 보강된 비탈면의 안정성은 시간경과와 더불어 앵커 긴장력의 증가와 감소로 인해 불안정한 상태로 변화한다. 현재 이에 대한 연구는 미미한 실정으로 특히, 개별 앵커 긴장력 감소가 비탈면 전체의 안전율에 어느 만큼 영향을 미치는지는 불명확하다. 이에 본 연구에서는 전단강도감소기법을 이용한 수치해석적 방법으로 앵커긴장력감소율에 따른 비탈면 안전율 감소를 계산하여 경향을 분석하였다. 해석결과, 앵커긴장력의 감소율이 클수록 비탈면 전체 안정성이 저하하였고, 특히, 비탈면 최하단부에 설치된 앵커의 긴장력 감소량이 클수록, 그리고 앵커 설치 간격이 클수록 비탈면 전체 안전율은 더 크게 감소하였다.
마이크로 포커스 X-ray CT를 이용한 콘크리트 손상균열의 정량적 평가
정자혜 ( Jahe Jung ) 대한지질공학회 2018 지질공학 Vol.28 No.3
본 연구에서는 치핑작업중에 콘크리트에 발생할 수 있는 손상균열을 정량분석하기 위해 X-ray CT 이미지를 이용하는 방법을 제안하고자 한다. 이를 위해 치핑작업을 수행한 후, 균열이 발생한 콘크리트 블록을 코어링하여 직경 50 mm, 길이 100 mm의 시편을 준비하였다. 그 후 마이크로 포커스 X-ray CT 촬영을 하여 얻은 이미지를 3D 이미지로 재구성(reconstruction)하였다. 이렇게 얻어진 3D CT 이미지에 3DMA (3 Dimensional Medial axis Analysis)법을 적용하여, 손상 평가 파라메타로 시편의 위치에 따라 균열의 성질을 평가하여 손상을 분석하였다. 분석결과 치핑에 의한 손상은 치핑 표면으로부터 3 cm 깊이까지 발생한 것으로 나타났다. 또한 CT이미지 공간분석법에서 사용되는 여러 파라메타 중 공극률 지표(Porosity index), Burn number 그리고 Medial axis 의 파라메타를 이용해 치핑표면 근처의 손상 분석이 가능하다는 것이 확인되었다. 이 방법은 내부구조에 변화가 발생한 암석을 대상으로 한 연구에서도 비파괴 상태로 내부의 균열 평가, 가시화에 적용가능하다. This study developed a method to quantitatively measure the size of cracks in concrete using X-ray CT images. We prepared samples with a diameter of 50 mm and a length of 100 mm by coring cracked concrete block that was obtained by chipping. We used a micro-focus X-ray CT, then applied the 3DMA method (3 Dimensional Medial axis Analysis) to the 3D CT images to find effective parameters for damage assessment. Finally, we quantitatively assessed the damage based on sample locations, using the damage assessment parameter. Results clearly show that the area near the chipping surface was damaged to a depth of 3 cm. Furthermore, X-ray methods can be used to evaluate the porosity index, burn number, and medial axis, which are used to estimate the damage to the area near the chipping surface.
논문 : 지진에 의한 건축물 붕괴 시 매몰공동 위치 예측에 관한 수치해석 사례 연구
정자혜 ( Ja He Jung ),박훈 ( Hoon Park ),김광염 ( Kwang Yeom Kim ),신휴성 ( Hyu Soung Shin ) 대한지질공학회 2015 지질공학 Vol.25 No.4
건축 구조물 붕괴 사고가 발생했을 때, 건물 내에 있는 사람들의 긴급구호를 위해 가장 먼저 해야 할 일은 인명이 매몰되어 있는 위치(이하 매몰 공동이라 칭함)를 찾는 일이다. 그러나 붕괴된 건물의 잔해물 내에 위치한 매몰 공동을 일반적인 탐색 방법으로 찾는 것은 불가능하다. 이에 대한 해결방법으로 본 연구에서는, 붕괴시뮬레이션을 통하여 건축 구조물 붕괴 시 지하층에 형성되는 매몰 공동을 평가하였다. 붕괴 시뮬레이션에 사용되는 매몰 공동 유형에 영향을 미치는 인자로는 건축 구조물 층고, 내부 벽체의 유/무로 설정하였다. 시뮬레이션 결과, 지하벽체가 없고 고층 건물일수록 동일한 지진하중에서 큰 면적으로 붕괴가 발생하여 매몰 공동 형성에 불리한 것으로 나타났다. 또한, 매몰 공동이 형성될 경우 건물 외벽 부근이나 코너 부분에 형성될 가능성이 높은 것으로 나타났다. The most urgent measure to be taken for a rapid rescue when a building collapse happens is to designate or predict a possible location where human beings are alive. It is, however, very difficult to find and correctly designate such cavities by conventional geophysical survey due to a pile of debris of building members. In this study, the simulation of building collapse induced by an earthquake was conducted to predict forming pattern of a existing cavities. The simulation cases included the influence of structure wall existence and height of building. Three types of building structure: five-story, ten-story and fifteen-story were prepared as a simulation case. In the case of high building, a collapse range on the inside of the building increased consequently lowering the possibility of lifeguard cavern forming. In addition, when a wall exists in the basement floor, the possibility that existing cavities could be formed increased compared to the cases without wall.