http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정의훈,김재수 한국정보디자인학회 2011 정보디자인학연구 Vol. No.
본 연구에서는 Basic-FNN (Fuzzy Neural Networks)을 기초로 이미지 검출 방법을 제안하고, 이미지 검출 시스템에 대한 설계와 구현을 하였다. 기존의 검출방식은 단순히 명도와 채도를 이용한 내용기반 검출 방식인데 반하여 본 연구에서 제시한 방식은 Pixel의 RGB를 퍼지신경망을 이용하여 이미지 외곽선을 검출하는 방법을 제시하였다. 본 논문을 기초로 향후 이미지 처리 분야인 비디오 게임, 가상현실, Visual System 분야에 응용이 가능할 것이다.
우선순위 기반의 예약 코드 다중 접속 (P-RCMA) 프로토콜
정의훈 한국통신학회 2004 韓國通信學會論文誌 Vol.29 No.2A
본 논문에서는 우선 순위 기반의 예약 코드 다중 접속 (P-RCMA) 프로토콜을 제안한다. P-PCMA는 기존의 RCMA 프로토콜의 음성 트래픽 성능을 개선한다. P-RCMA는 두 개의 전력 수준을 유지하고 패킷 전송을 위해 공유된 코드를 경쟁하는 시점에 트래픽의 전송 특성을 고려한다. P-RCMA는 기지국 수신 단에서 전력 세기에 따른 캡쳐 효과를 이용하여 데이터 패킷보다는 음성 예약 패킷에 우선순위를 부여한다. 성능 분석은 EPA(equilibrium point analysis) 방법과 시뮬레이션을 이용하고 성능 척도로 음성 패킷 손실 확률 (voice packet dropping probability) 과 평균 데이터 패킷 전송 지연 (average data packet transmission delay)을 사용한다. We propose priority-based reservation code multiple access (P-RCMA) which can enhance voice traffic quality of the previous RCMA. The proposed protocol maintains two power levels and consider traffic characteristics in contending shared available codes to transmit packets. P-RCMA gives priority to the voice request packets rather than data packets by capture effect at the receiver part of base station. We show numerical results from EPA (equilibrium point analysis) analysis and simulation study in terms of voice packet dropping probability and average data packet transmission delay.
정의훈,김재붕,조성익,Jung, Eui-Hoon,Kim, Jae-Bung,Cho, Seong-Ik 한국전기전자학회 2013 전기전자학회논문지 Vol.17 No.4
본 논문에서는 DAC(Digital to Analog Converter) 출력을 지연시켜 디지털 피드백 패스를 추가하는 FDPA 기법을 사용한 SDM(Sigma Delta Modulator)을 제안한다. 지연된 디지털 피드백 패스만을 추가하여 SDM의 해상도를 높이고 기존 구조의 아날로그 피드백 패스를 제거함으로써 기존 구조에 비해 사용되는 클록이 줄어들어 회로가 간단하다. 제안한 구조를 설계하기 위해 MATLAB 모델링을 이용하여 적분기의 최적 계수를 설정하였다. 설계된 SDM은 $0.18{\mu}m$ CMOS 공정을 사용하였고 신호 대역폭 20KHz, 샘플링 주파수 2.56MHz에서 81dB의 SNR, $220{\mu}W$의 전력을 소모한다. This paper presents a SDM using the FDPA technique. The FDPA technique is the added feedback path which is the delayed path of DAC output. The designed SDM increases the SNR by adding the delayed digital feedback path. The proposed SDM is easily implemented by eliminating the analog feedback path. Through the MATLAB modeling, the optimized coefficients are obtained to design the SDM. The designed SDM has a power consumption of $220{\mu}W$ and SNR(signal to noise ratio) of 81dB at the signal-bandwidth of 20KHz and sampling frequency of 2.56MHz. The SDM is designed using the $0.18{\mu}m$ standard CMOS process.
파이썬기반 고주파 디지털 계측기 사용자 인터페이스 개발
정의훈,김용식 한국인터넷방송통신학회 2022 한국인터넷방송통신학회 논문지 Vol.22 No.6
Recently, with the development of mobile communication technologies such as 5G, interest in oscilloscope technology based on high bandwidth and user-friendly UI is increasing. In this paper, we proposed a Python-based UI(user interface) SW for a high-bandwidth digital oscilloscope in connection with the study of a 13GHz band digital oscilloscope system. The proposed UI SW is designed not only to be executed integrally with the oscilloscope, but also to be run on a separate PC or laptop cooperating with the instrument through WiFi communication. Functions of the UI SW consists of displaying and analyzing signal data, storing signal data in an external storage device, generating test signal data, and reconfiguring the toolbar. Finally, we have shown that the proposed digital oscilloscope system operates normally by interworking test with the signal generator. 최근 5G등 이동통신 기술의 발전과 더불어 고대역 및 사용자 친화적 사용자 인터페이스(user interface) 기반의오실로스코프 기술에 대한 관심이 증가하고 있다. 본 논문에서는 13GHz 대역의 디지털 계측기 개발과 연계하여 파이썬기반의 고대역 디지털 계측기를 위한 사용자 인터페이스 SW를 개발하였다. 개발된 디지털 계측기 시스템의 UI SW는계측기와 일체형으로 실행될 뿐만 아니라 별도의 PC나 노트북에서 실행되면서 계측기와 WiFi 통신을 통해 연동할 수도있도록 설계되었다. UI SW의 기능은 신호 데이터를 화면에 다양하게 표시하고 분석하는 기능과 외부 저장 장치에 신호데이터를 저장하는 기능, 시험용 신호 데이터 생성 기능, 툴바 재구성 기능 등으로 구성된다. 그리고 신호 생성기와의연동 시험을 통해 제안된 디지털 계측기 시스템이 정상적으로 동작함을 보였다.