http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정성혁,황창섭,이재기 충북대학교 건설기술연구소 2002 建設技術論文集 Vol.21 No.2
Recently, many studies extracting the geography information using digital aerial image have been implemented. But it is very difficult to recognize objects automatically from the aerial image using edge detection method, and so that work for recognition has practiced manually or semi-automatically. Therefore, in this study, we have removed impedimental elements for recognition using the image which overlapped the significant information bands of brightness-sliced aerial images, then have developed the algorithm which can automatically recognize and extract road information. And we will try to apply that method when we develop a system. For this, first of all, we have developed the "template conformal-transformation moving operator" for automatically recognizing crosswalk area from crosswalk band image and the "window normal search algorithm" which is able to track road area based on long-side length of crosswalk. So, we have proposed the method that can extract directly the road information from the aerial image.
디지털 카메라를 이용한 무인항공 사진측량의 정확도 분석
정성혁,임형민,이재기 한국측량학회 2009 한국측량학회지 Vol.27 No.6
For construction of 3D virtual city models, airborne digital cameras, laser scanners, multi-oblique photograph systems and other devices are currently being used. With such advanced techniques, precise 3D spatial information can be collected and high quality 3D city models can be built in a considerably large area. The 3D spatial information to be built has to provide the latest information that quickly reflects the causes of any change due to urban development. In this study, a UAV photogrammetric method using low cost UAV and digital camera was proposed to acquire and update 3D spatial information effectively on small areas where information continuously change. In the proposed UAV photogrammetric method, the elements of interior orientation were acquired through camera calibration and the vertical and oblique photographs were taken at 9 points and the 3D drawing of ground control points and buildings was performed using 20 images among the pictured images. This study also analyzed the accuracy of the proposed method comparing with ground survey data and digital map in order to examine whether the method can be used in on-demand 3D spatial information update on relatively small areas. 현재, 3차원 도시를 구축하기 위하여 디지털 항측카메라, 레이저스캐너, 다중경사사진 촬영시스템 등이 활용 또는 연구중에 있다. 이와 같은 최신 기법을 이용하여 비교적 넓은 지역의 정밀한 3차원 공간정보를 신 속하게 구축할 수 있으며 고품질의 3차원 가상도시를 구축할 수 있다. 또한, 구축된 3차원 공간정보는 최근 빠른 경제발전과 개발에 따른 변화의 요인을 신속하게 반영하여 최신의 공간정보를 제공하여야 한다. 본 연구에서는 변화가 발생한 소규모 지역의 3차원 공간정보의 경제적이며 효율적인 갱신을 위한 근접 항공사 진측량을 이용한 3차원 공간정보 수시갱신 체계를 확립하는데 목적을 두고 수행되었다. 연구에서 제안된 무 인항공 사진측량기법은 비교적 저가의 무인항공기와 일반 디지털카메라를 이용하여 수행되었으며, 카메라 검정을 통해 내부표정 요소를 취득하고 9개 지점에서 수직 및 경사사진 촬영을 실시하였다. 촬영된 영상중 20매의 영상을 이용하여 기준점 및 건물에 3차원 도화를 실시하고 지상측량자료 및 수치지도와 비교함으로 써 제안된 기법의 정확도와 소규모 지역에서 발생하는 3차원 공간정보의 수시갱신에 활용될 수 있는지를 분 석하였다.
정성혁,이재기 한국측량학회 2005 한국측량학회지 Vol.23 No.1
The purpose of this study was to establish the accuracy of the industrial photogrammetry system constructed with INCA2 metric camera and V-STARS system on steel box girder measurement under industrial measurement condition. The objective of the measurement was to determine the distances of plane to plane or plane to libs, precise positions of the bolt holes and angles of the plane to plane on the steel box girder using coded targets, tape targets, edge targets and target adapters. The measurement undertaken has shown that industrial photogrammetry method were a very accurate and more importantly were produced quickly to measure the steel box girder. 본 연구의 목적은 INCA2 카메라와 V-STARS 시스템으로 구성된 산업사진측량 시스템을 이용하여 현장 산업측정 조건에서 강박스거더의 측정을 실시하고, 그 측정 정확도를 평가하는데 있다. 실험을 위하여 코드타겟, 테이프타겟, 에지타겟 및 타겟어뎁터를 이용하였으며, 강박스 거더 부재면과 면사이의 거리, 부재와 리브간의 거리, 가조립을 위한 볼트구멍의 정확한 위치 및 부재면과 면 사이의 교차 각도 등을 측정 대상으로 하였다. 실험결과 본 연구에서 제안한 산업사진측량 기법으로 교량용 강박스 거더를 매우 정확하고, 신속하게 측정할 수 있었다.
정성혁,김정태,Jung, Sung-Hyuck,Kim, Jung-Tae 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.9
본 논문에서는 이미지 센서와 외부의 구성요소 들과의 정합 모듈을 FPGA(Field Programmable Gate Array)를 사용하여 설계하였다. 일반적으로, 저준위 이미지의 데이터를 동기화하기 위하여 SRAM이 요구된다. 본문에서는 신호와 픽셀 단위의 크기를 가진 이미지 신호를 동기화하기 위하여 FPGA를 사용하여 인터페이스의 정합 모듈을 설계함을 목적으로 한다. 본 논문에서는 픽셀 단위로 구현함으로써 고화질의 이미지를 얻을 수 있다. 사용한 이미지 센서와 TFT-LCD의 동작 주파수는 각각 50MHz와 6.5MHz이다. 또한, 구현한 대부분의 제어부는 FPGA에 내장되어 있고 Altera사의 Quartus II 저작도구를 사용하였으며, 설계된 논리 게이트의 수는 33,216 개다. Interface modules design between image sensor and external components are designed by FPGA (Field Programmable Gate Array) in this paper. Generally speaking, to satisfy synchronization for the poor quality data in image, SRAM is needed. To receive synchronization signal and image signal data with pixel dimension, the proposed interface logic technique is implemented. From the proposed technique, we can obtain more clear screen by implementing with pixel dimension. Operating frequency of image sensor and that of TFT-LCD are 50MHz and 6.5MHz, respectively. Most of control logic functions are embedded in FPGA. The designed logic gate counter has 33,216 and is designed by Quartus II.