http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전승원 ( Seung Won Jeon ),박찬성 ( Chan Seong Park ),김윤호 ( Yoon Ho Kim ),이규정 ( Kyu Jung Lee ) 한국안전학회 2009 한국안전학회지 Vol.24 No.4
침식마모로 인하여 손상되어 차량화재를 유발한 차량용 워터펌프의 성능저하를 CFX프로그램을 이용하여 해석하였다. 손상에 따른 성능저하를 해석하기 위하여, 블레이드의 굽힘변형과 간극의 증가를 고려하였다. 캐비테이션 해석 시에는 포화증기 발생과 응축 과정을 모델링하기 위하여 Rayleigh-Plesset 모델을 적용하였다. A flow analysis for the erosion-corrosion damaged automotive water pump which causes vehicle fire is numerically performed using the CFX program, computational fluid dynamics (CFD) code. The blade bending deformation and the blade clearance enlargement are considered in the analysis of performance reduction. For the cavitation analysis, the homogeneous multi phase model is adopted using the Ralyleigh-Plesset model for the rate equation controlling vapor generation and condensation.
새로운 채널 배열을 통한 마이크로채널 열교환기 성능 향상 수치 연구
전승원(Seung Won Jeon),이규정(Kyu Jung Lee),문동주(Dong Ju Moon) 대한기계학회 2011 大韓機械學會論文集B Vol.35 No.11
기존 마이크로채널 열교환기는 한 플레이트에 고온 또는 저온, 한 종류의 유체만이 흐르고 있다. 채널 내부를 흐르는 유체의 수직 방향으로는 다른 종류의 유체가 존재하지만, 수평 방향으로는 같은 종류의 유체가 존재한다. 그로 인해 수평 방향의 열전달률은 수직 방향에 비하여 낮게 나타나게 된다. 열교환기 성능 향상을 위하여 한 플레이트에서 고온, 저온 유동이 번갈아가며 존재하는 새로운 채널 배열을 제안하였다. 새로운 채널 배열을 위해서는 특별한 입구 및 출구 설계가 필요하다. 제안된 채널 배열을 통하여 기존 열교환기보다 높은 열전달률을 얻을 수 있다. Reynolds 수와 Prandtl수가 증가할수록 새로운 채널 배열로 인한 열 성능 향상이 증가하고, 고체와 유체의 열전도계수 비가 증가할수록 열 성능 향상은 감소한다. In conventional microchannel heat exchangers, only one kind of fluid (hot or cold) flows in each plate. The channels contain different kinds of fluid depending on the vertical position, but they have the same kind of fluid at all horizontal positions. Therefore, there is a slower heat transfer rate in the horizontal direction than in the vertical direction. We propose a microchannel heat exchanger in which hot and cold fluid flows alternately in each plate to improve the thermal performance. This novel channel array requires a special design for the inlet and outlet. The proposed channel array has a faster heat transfer rate than a conventional channel array. The thermal performance of the novel channel array increases with increasing Reynolds number and Prandtl number, but it decreases as the ratio of solid to fluid thermal conductivity increases.
전승원(Seung-Won Jeon),이원호(Won-Ho Lee),정진호(Jin-Ho Jung),심재정(Jae-Jeong Shim),고성제(Sung-Jea Ko) 한국정보과학회 1998 한국정보과학회 학술발표논문집 Vol.25 No.2Ⅲ
인터넷을 이용한 설문조사는 기존의 설문조사에 비해 저렴한 비용으로 빠른 시간 내에 결과를 분석할 수 있다는 장점으로 인해 점점 이용이 증가하고 있다. 본 논문에서는 인터넷 상에서 온라인으로 설문문서의 작성에서부터 설문조사, 결과 분석, 처리 및 가시화에 이르는 전 과정을 자동화한 새로운 설문조사 시스템을 제안한다. 제안하는 시스템은 설문문서 자동생성기를 통하여 설문조사 웹 페이지를 누구나 쉽게 만들 수 있고, CGI를 이용하여 인터넷과 데이터베이스를 자동으로 연동하였으며 자바 애플릿을 사용하여 설문결과를 그래프로 가시화하였다. 또한 음성이나 동영상 등의 멀티미디어 파일을 첨부함으로써 설문대상자들의 관심과 흥미를 유도하여 설문결과의 신뢰도를 높였다. 그리고 제안하는 시스템을 이용하여 인터넷 상에서 실제 설문조사를 실시하여 시스템의 활용 가능성을 확인하였다.
마이크로채널 메탄 수증기 개질 반응기의 열 및 물질 전달 특성에 관한 수치해석 연구
전승원(Seung Won Jeon),이규정(Kyu Jung Lee),조연화(Yeon Hwa Cho),문동주(Dong Ju Moon) 대한기계학회 2012 大韓機械學會論文集B Vol.36 No.9
마이크로채널 메탄 수증기 개질 반응기의 열 및 물질 전달 특성을 이해하기 위한 수치해석 연구를 수행하였다. Rh-촉매의 메탄 수증기 개질 반응과 Pt-촉매의 메탄 연소 반응을 함께 모델링하였다. 화학 반응의 반응 속도를 해석 모델에 적용하였다. 접촉시간, 평행류·대향류 등 유동 패턴, 채널 크기 등이 개질 성능과 온도 분포에 미치는 영향을 관찰하였다. 평행류와 대향류는 서로 반대되는 온도 분포를 갖게 되고, 그로 인해 서로 다른 반응 속도와 화학종 몰분율을 나타낸다. 접촉시간이 짧아지고 채널 크기가 증가할수록 촉매층과 혼합물 유동 사이의 물질 전달이 제한되어 개질 성능은 감소하게 된다. A numerical study of a microchannel steam methane reforming reactor has been performed to understand the characteristics of heat and mass transfer. The integration of Rh-catalyzed steam methane reforming and Pt-catalyzed methane combustion has been simulated. The reaction rates for chemical reactions have been incorporated into the simulation. This study investigated the effect of contact time, flow pattern (parallel or counter), and channel size on the reforming performance and temperature distribution. The parallel and counter flow have opposite temperature distribution, and they show a different type of reaction rate and species mole fraction. As the contact time decreases and channel size increases, mass transfer between the catalyst layer and the flow is limited, and the reforming performance is decreased.
수소 제조용 마이크로채널 메탄 수증기 개질기의 핫스팟 최소화에 대한 연구
전승원(Seung Won Jeon),차도원(Dowon Cha),김형순(Hyung Soon Kim),장동수(Dong Soo Jang),김용찬(Yongchan Kim) 대한기계학회 2014 대한기계학회 춘추학술대회 Vol.2014 No.11
Hot spot formation is very important issue in a heat exchanger integrated microchannel reactor for steam reforming of methane. Rapid temperature increase was observed near the inlet because reaction rate of catalytic combustion was very high near the inlet. In this study, catalytic combustion layer with stripe configuration was proposed to prevent hot spot formation. 2D steady state numerical simulation was conducted using Fluent 14. The configuration of stripe was optimized by using response surface methodology. As a result, the hot spot was disappeared near the inlet without any conversion loss. The maximum temperature of the optimized stripe combustion catalyst layer was 145 K lower than the uniform combustion catalyst layer. The optimized stripe combustion catalyst layer showed about 6.0% smaller surfaceaveraged particle diameter than the uniform combustion catalyst layer.
Low GWP 냉매를 적용한 증발기용 판형 열교환기 성능 해석 시뮬레이션
전승원(Seung Won Jeon),김동우(Dongwoo Kim),장동수(Dong Soo Jang),문한석(Hanseok Mun),김용찬(Yongchan Kim) 대한설비공학회 2015 대한설비공학회 학술발표대회논문집 Vol.2015 No.11
Evaporative heat transfer and pressure drop characteristics of a plate heat exchanger were studied for the low-GWP refrigerants of R-1234yf and R-1234ze(E). A counter current plate heat exchanger was simulated and the performance of low-GWP refrigerants was evaluated against R-134a. The effects of mass flow rate and evaporating temperature were also investigated. As a result, the heat transfer rates of R-1234yf and R-1234ze(E) were 15.2% and 6.0% lower than R-134a. In addition, the pressure drops of R-1234yf and R-1234ze(E) were 25.6% lower and 20.9% higher than R-134a, respectively.
채널 배열을 통한 마이크로채널 열교환기 성능 향상 수치 연구
전승원(Jeon Seung-Won),이규정(Kyu-Jung Lee) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.11
In conventional microchannel heat exchanger, only one kind of fluid(hot or cold) flows in each plate. The channel flow has the different kind of fluid on vertical direction, but the same kind of fluid on horizontal direction. Thereby the heat transfer rate exhibit lower value on horozontal direction than vertical direction. We propose microchannel heat exchanger that hot and cold fluid flow alternately in each plate. This channal array has higher heat transfer rate in comparison to conventional channel array. The increment on thermal performance with alternate channel array increases with increasing Reynolds number and Prandtl number but, decreases with increasing ratio of solid to fluid thermal conductivity.
채널 형상에 따른 마이크로채널 판형 열교환기 열전달 성능 향상에 관한 수치 연구
전승원(Seung-Won Jeon),김윤호(Yoon-Ho Kim),이규정(Kyu-Jung Lee) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.5
In this study, the microchannel plated heat exchanger were numerically studied for the enhancement of heat transfer in the channel configuration. Unit cold and hot fluid region with the microchannel were modeled and periodic boundary condition at the side wall was applied to continuously repeating geometry. The material of micro-structured plate is STS304 and working fluid is water. Triangular obstacles were placed in micro channel to enhance heat transfer. The performance of microchannel plated heat exchangers were numerically investigated with various obstacle configuration and Reynolds number under the parallel and counter flows. Heat transfer rate has increased about 18% compared with straight channel, but pressure drop also increased about 3.5 times. The main factor of increasing of pressure drop and heat transfer rate is considered that the momentum was lost to collide against obstacles, generation of secondary flow and boundary layer separation, wake and vortex forming phenomena.
전승원(Seung-Won Jeon),이규정(Kyu-Jung Lee),조연화(Yeon-Hwa Cho),문동주(Dong-Ju Moon) 대한설비공학회 2011 대한설비공학회 학술발표대회논문집 Vol.2011 No.7
A numerical study on characteristics of microchannel steam methane reforming reactor has been performed. The integration of Rh-catalyzed steam methane reforming and Pt-catalyzed methane combustion has been simulated. The reaction rates for chemical reactions have been in corporated into the simulation. It is investigated the species and temperature distribution inside the reactor and analyzed the performance of reactor with operating conditions. The methane conversion increases with increasing contact time and reactor temperature.