http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
장하,은혜혜 대한중국학회 2022 중국학 Vol.81 No.-
本文探讨了数字经济对广东省人口迁移的效应及其背后的机制。本文采用固定效应模型测度了2011—2019年中国广东省21个地级及以上城市的数字经济发展对城市人口迁移的影响。本研究结果表明:数字经济的发展对城市人口净迁移率存在显著的拉力作用,能够显著提升城市的净迁移率,并且对城市迁出率存在显著的负向影响。城市经济发展水平和医疗水平对城市人口的迁入亦存在显著的拉力作用。这一结论在引入工具变量后仍然成立。本研究为区域内数字经济发展与人口迁移提供了解释机制和实证经验证据,有助于理解数字经济的发展与城市人口变迁之间的作用机制。在此基础上,本研究提出了相关政策建议,为广东省数字经济发展、人才引进等政策的制定提供一定的参考依据。
The Impact of Air Pollution on the Willingness to Stay in Cities: Evidence from A Chinese Survey
He Zhang(장하),Tackseung Jun(전택승) 한국지역학회 2023 지역연구 Vol.39 No.4
중국의 급속한 경제성장과 가속화된 도시화에 따라 노동력의 이동성이 증가하였으며, 이에 따라 이주자의 거주지 선택과 거주 의도는 중국의 경제와 사회에 중요한 영향을 미치게 되었다. 본 연구는 대기오염이 도시간 이동한 사람들이 장기적으로 도시에 머무르려 하는지에 어떤 영향을 주는지 분석한다. 중국 도시간 이동한 사람들에 대한 서베이 자료와 도시 수준의 PM2.5로 대표되는 대기오염자료를 매칭함으로써, 회귀분석을 통해서 도시의 대기 질을 좋은 곳으로 이동한 사람들은 해당 도시에 더 오래 남으려는 유인을 가지고 있음을 알 수 있다. 본 연구결과를 통해서 대기질의 유지가 도시의 인구를 지속적으로 유지하는데 중요한 변수임을 알 수 있다. China’s rapid economic growth and accelerated urbanization have significantly increased labor force mobility. The choice of city residence and long-term residence intentions of migrants will have significant consequences on both economic output and societal dynamics. This paper investigates the impact of air quality on the long-term residence intention of migrants. By matching an individual-level survey on willingness to stay in the long run and the city-level air quality, represented by PM2.5, we find that the willingness to stay in the long run increases with better air quality. This implies that public policy to maintain good air quality is crucial in keeping those who moved to the city.
Research on the Impact of ASEAN s GVC Participation and Position on Its Domestic Employment
여지춘(Zhi-chun Yu),장하(He Zhang),최영준(Young-jun Choi) 한국산업경영학회 2021 경영연구 Vol.36 No.3
본 논문은 2005년부터 2016년까지 아세안 글로벌 가치사슬 분업이 고용(남녀 고용 포함)에 미치는 영향을연구하기 위해 GLS 회귀분석을 활용한다. 결과는 아세안 국가들의 GVC 참여가 일반적으로 높지 않고, 후방참여보다 전방참여가 높은 것으로 나타났다. GVC_participation가 고용에 미치는 영향은 부정적이어서 아세안국가들의 참여가 늘어나면 고용 수요가 감소한다는 것으로 보인다. GVC_position은 아세안 국가들의 남성고용률에 큰 영향을 미치지 않는다. 따라서 아세안 국가들은 풍부한 인력 자원을 최대한 활용하고, 외국인투자를 유치하고 글로벌 가치사슬에서 아세안 국가들의 참여도를 강화할 것을 권고한다. 아울러 정부는 실업자들의 농촌창업을 독려하고 직업훈련에 박차를 가하며 제3차 산업을 활발히 발전시켜 여성의 서비스업 노동참가율을 높여야 한다. 아세안 국가들은 여성 교육에 중요성을 부여하고 여성의 전문기술 개발을 촉진해야한다. 마지막으로 아세안 10개국이 글로벌 가치사슬에서 입지를 강화하기 위해서는 독자적 혁신역량 향상과첨단기술 인재 양성을 중시하며 GVC의 후방참여를 늘려야 된다. This paper uses GLS regression analysis to study the impact of the ASEAN global value chain(GVC) division of labor on its employment (including male and female employment) from 2005 to 2016. The results show that GVC participation in ASEAN countries is generally not high, and forward participation is higher than backward participation. The impact of GVC participation on employment is significantly negative, indicating that the extension in the participation of ASEAN countries will reduce the demand for employment. GVC_position has no significant impact on male employment rate of ASEAN countries. Therefore, it is recommended that ASEAN countries make full use of abundant labor resources, attract foreign investment, and expand the participation of ASEAN countries in the GVC. Besides, the government encourages unemployed people to start businesses in rural areas, speeds up vocational training, and vigorously develops the tertiary industry, thereby increasing the labor participation rate of women in the service industry. ASEAN countries need to attach importance to women’s education and promote the development of women’s professional skills. Finally, ASEAN countries should improve their independent innovation capabilities, attach importance to the training of high-tech talents, and increase the backward participation of GVCs, so as to enhance the position of the ten ASEAN countries in the global value chain.
금속분리판의 Electro Polishing 및 CrN 코팅을 통한 PEMFC 성능 향상을 위한 연구
황성택(Sung Tack Hwang),천승호(Seung Ho Cheon),송준석(Jun Seok Song),윤영훈(Younghoon Yun),김병헌(Byeong Heon Kim),장하(Xia Zhang),김대웅(Dae-Ung Kim),현덕수(Deoksu Hyon),오병수(Byeong Soo Oh) 한국자동차공학회 2013 한국자동차공학회 지부 학술대회 논문집 Vol.2013 No.5-1
As an important component of a fuel cell, the bipolar plate comprises a large proportion in the fuel cell’s volume, weight and price. The bipolar plate is the most widely used; however, graphite bipolar plate is large in volume, brittle and therefore easily broken during assembling. In addition, due to its poor machinability, production costs a lot, unless mass production. Compared with the graphite bipolar plate, the metal bipolar plate has good machinability, high electric conductivity and strong mechanical strength; however, it corrodes easily and has a high contact resistance, so in order to prevent corrosion and reduce the contact resistance, the basic metal needs to be processed by use of electro polishing and coating. The water which is produced by electrochemical reactions in the fuel cell must be discharged smoothly. In this study, in order to prevent corrosion the processes of electro polishing and CrN coating were used. According to the presence or absence of these processes, the contact angles can be measured and different metal bipolar plates can be made, these plates can be used for comparing and analyzing the performance of the fuel cell.