RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • 한방향 복사특성을 갖는 T-모양 급전선 마이크로스트립 슬롯 안테나의 해석

        장용웅,오동진,Jang, Yong-Woong,Oh, Dong-Jin 대한전자공학회 1999 電子工學會論文誌-T Vol.t36 No.4

        본 논문에서는 2-층의 유전체로 구성하여 한방향 복사특성을 갖는 T-모양 급전선의 슬롯 안테나인 새로운 구조를 제안하였다. 또한 양방향으로 복사특성을 갖는 슬롯 안테나는 한방향으로만 복사하기를 원할 경우, 반사판을 별도로 설치해야 한다. 그러나 여기에서 제시한 안테나는 별도의 반사판 설치가 필요없게 된다. T-모양의 마이크로스트립 급전 구조는 슬롯의 폭 변화에도 임피던스 정합이 쉽게 이룰 수 있었다. 그리고 슬롯 안테나의 대역폭은 슬롯 폭에 비례하여 확장되는 특성을 얻었다. 여기서 제시한 급전 구조는 방사저항이 낮은 값으로 일정하게 유지되어 슬롯 폭과 거의 무관한 좋은 특성을 얻었다. FDTD법으로 모델링하여 전계분포를 시간 영역에서 계산하였고, 이를 Fourier 변환시켜 슬롯 안테나의 반사손실, 전압 정재파비, 복사 패턴을 주파수 영역에서 계산하였다. 측정한 결과로부터, 대역폭은 중심 주파수 2.5GHz에서 약 34.8%의 광대역 특성을 보였다. 측정치들은 계산치들과 비교적 잘 일치하였다. In this paper, we proposed to a new structure of T-shaped fed microstrip slot antenna using 2-layers dielectric material with a directional radiation characteristic. When the slot antenna of bi-directional radiation want to radiate only one direction, the reflector must be set up, but this antenna does'nt need set up reflector. T-shaped microstrip feed line is proposed for a better impedance matching to the microstrip slot antenna in a various range of slot widths. It was also found that the bandwidth of this antenna is proportional to the slot width. It was also found that the radiation resistance of this feed line structure is quite constant and low regardless to the slot width. We also analyzed this antenna by using the FDTD method, and calculating waves and electric field distribution in the time domain. we also are calculated return loss, VSWR, and radiation pattern in the frequency domain by Fourier transforming the time domain results, respectively. From the measured results, bandwidth was 34.8% in the center frequency. These results were in relatively good accordance with the calculated values.

      • 광대역성을 위한 장방형 스터브를 갖는 T-모양 급전선 마이크로스트립 슬롯 안테나의 해석

        장용웅,윤종철,박익모,신철재 대한전자공학회 1998 電子工學會論文誌, D Vol.d35 No.9

        T-모양의 마이크로스트립 급전 구조를 갖는 슬롯 안테나는 정합을 쉽게 이룰 수 있고 대역 폭이 기존의 급전 구조의 슬롯 안테나에 비하여 넓었다. 본 논문에서는 대역 폭을 더 넓일 수 있는 급전 구조에 대하여 서술하였다. 즉 T-모양 급전 구조에 병열 개방 스터브를 부착한 새로운 방법을 제시하였다. FDTD 법으로 모델링하여 전계분포를 시간 영역에서 계산하였고, 이를 Fourier 변환시켜 슬롯 안테나의 전압 정재파비, 입력 임피던스, 복사 패턴을 주파수 영역에서 계산하였다. 스터브의 위치(L₁)와 길이(L₂)에 따라 대역 폭이 변화하였으며, L₁=30 mm, L₂=33mm일 때 중심 주파수 2.3 GHz에서 최대 대역폭을 얻었다. 이러한 결과로부터 최적의 안테나를 설계 제작하였고, % 대역 폭은 53.9 %의 광대역 특성을 얻었으며, 이들 결과들은 계산값과 비교적 잘 일치하였다. It was shown that the bandwidth of T-shaped microstripline fed slot antenna is wider than many of the conventional feeding structures. In this paper, we proposed a new method of enhancing the bandwidth of T-shaped microstripline fed slot antenna with a shunt open stub, and analyzed this antenna by using the FDTD method. We have computed waves and electric field distribution in the time domain, and VSWR, input impedance and radiation pattern in the frequency domaim by Fourier transforming the time domain results. It was found that the bandwidth of this antenna depend on the position(L$_1$) and length(L$_2$) of a shunt open stub. When these parameters are L$_1$=30 mm and L$_2$=33mm, we obtained the maximum bandwidth at the center frequency of 2.3 GHz. From the computed results, the optimum antenna is designed and fabricated. The fractional bandwidth of this antenna was 53.9 %. The measured results were in relatively good accordance with computed values.

      • 슬롯과 개구 결합된 광대역 삼각형 마이크로스트립 패치 안테나의 해석 및 특성

        장용웅 에스케이텔레콤 (주) 2002 Telecommunications Review Vol.12 No.4

        본 논문에서는 T-모양 급전선을 갖는 슬롯과 개구-결합된 삼각형 마이크로스트립 안테나인 새로운 구조를 제안하였다. FDTD 법을 이용하여 안테나를 해석하였으며, 최대 대역폭을 갖는 안테나를 제작 및 실험하였다. T-모양의 마이크로스트립 급전 구조를 갖는 슬롯 안테나는 정합을 쉽게 이룰 수 있고 대역폭이 기존의 급전 구조의 슬롯 안테나에 비하여 넓었다. 파의 진행과정과 전계분포를 시간 영역에서 계산하였다. 그리고 FDTD 법으로 얻은 값들을 Fourier 변환시켜 반사손실, 전압 정재파비, 복사패턴을 주파수 영역에서 각각 계산하였다. 삼각형 패치의 길이와 폭, 슬롯의 길이와 폭, T-모양 급전선의 길이, offset에 따라 대역폭이 변하였다. 이 계산된 결과들로부터 최적의 안테나를 설계 및 제작하였고, 측정된 % 대역폭은 중심 주파수 2.2 GHz에서 44.5%의 광대역 특성을 얻었으며, 이들 결과들은 계산값과 비교적 잘 일치하였다. 측정된 이득은 4 dBi 이상의 특성을 얻었다.

      • KCI등재

        FDTD 법을 이용한 광대역 전자기 결합 마이크로스트립 안테나의 설계

        장용웅,신호섭,김남,박익모,신철재,Jang, Yong-Woong,Shin, Ho-Sub,Kim, Nam,Park, Ik-Mo,Shin, Chull-Chai 한국전자파학회 1998 한국전자파학회논문지 Vol.9 No.4

        본 논문에서는 유한차분 시간영역법(FDTD)를 이용하여 단일 마이크로스트립 안테나와 기생소자를 갖는 광 대역 마이크로 스트립 안테나의 특성을 해석하고, 최대 대역폭을 갖는 안테나를 설계하였다. 유한차분 시간영역 법에 의한 수치 해석 결과뜰 Fourier 변환하므로 주파수 영역에서의 반사손실, 입력 임피던스, 복사 패턴 동의 특성을 계산하였다. 이 안테나의 구동소자의 폭, 구동소자와 기생 소자 사이의 간격, 기생소자의 폭과 넓이 변화 에 따라 안테나의 입력 임피던스 및 반사손실, 전압 정재파비 둥의 특성이 변하고, 광대역 특성을 가진다. 따라서 서로 다른 소자틀은 다른 주파수에서 공진되고, 이러한 공진이 대역폭올 향상시킨다. 계산 및 측정한 결과, 결합성을 갖는 마이크로스트립 안테나는 단일 마이크로스트립 안테나의 면적에 약 2배 증가한 반면, 대역폭은 단일 마이크로스트립 안테나에 비해 약 4배 이상 개선되었다. 이러한 계산 결과들은 본 실험의 측정치와 비교적 잘 일치하였다. In this paper, characteristics of the wide band microstrip antennas with parasistic element are analyzed by the Finite Difference Time Domain(FDTD) method, and antenna parameters are optimized to get maximum bandwidth, retern loss, input impedance, and radiation pattern are calculated by Founier transforming the time domain results. The characteristics of the antenna are varied and the bandwidth of the antenna is broaded as a length and a width of the driven element, a gap of the driven element and the parasitic element, a width and a length of parasitic element. So the different patchs are resonating at different frequencies and this multipule resonance increase the bandwidth. The Results of the calculation and measurement, the size of the antenna with parasitic element is about a twice larger than a microstrip antenna, but bandwidth is four times better than a microstrip antenna. And these results were in relatively good accordance with the measured values.

      • KCI등재

        기생패치를 갖는 다중-밴드 및 고이득 평판형 안테나

        張用雄,申昊燮,李昌彦 대한전자공학회 2003 電子工學會論文誌 IE (Industry electronics) Vol.40 No.12

        In this paper, we studied. a rectangular microstripline-fed slot antenna back-stacked patch under feeding point and a ground plane for a reflector. In this case, a rectangular microstrip feedline leads to the good impedance matching in a wide frequency band. And a inserted parasitic patch under the feeding point acts as a enhancing gain. We analysis the antenna using FDTD(Finite Difference Time Domain) method. As the measured results, we obtained the high-gain characteristics, which is repectively 5.9 dBi at the lower band(Cellular, GSM), 6.8 dBi at the higher band(DCS, PCS, IMT-2000, WLL). 이 논문에서는 급전점 밑에 기생패치가 삽입된 직사각형 급전 슬롯 안테나에 대하여 연구하였다. 이 경우, 직사각형 급전선은 넓은 대역에 걸쳐 양호한 임피던스 정합을 이룬다. 그리고 급전선밑에 삽입된 기생패치는 이득을 증가시키는 역할을 하였다. 제안된 안테나를 유한차분시간영역법을 이용하여 해석하였다. 측정한 결과, 안테나의 이득은 낮은 대역(Cellular, GSM)에서 5.9 dBi 이며, 높은 대역(DCS, PCS, IMT- 2000, WLL)에서 6.8 dBi의 고이득 특성을 각각 얻었다.

      • KCI등재

        T-모양 급전선을 갖는 마이크로스트립 슬롯 안테나의 특성 분석

        장용웅,윤종철,박익모,신철재 한국전자파학회 1998 한국전자파학회논문지 Vol.9 No.5

        본 논문에서는 T-모양의 마이크로스트립 급전 구조는 슬롯의 폭 변화에도 임피던스 정합이 쉽게 이룰 수 있는 방법을 제시하였다. 그리고 슬롯 안테나의 대역폭은 슬롯 폭에 비례하여 확장되는 특성을 얻었다. 여기서 제시한 급전 구조는 방사저항이 낮은 값으로 일정하게 유지되어 슬롯 폭과 거의 무관한 좋은 특성을 얻었다. 그리고 FDTD법을 사용하여 T-모양 급전선으로 여기된 슬롯 안테나를 모델링하여 파의 진행 과정과 전계분포를 시간영 역에서 각각 계산하였다. 그리고 FDTD법올 사용하여 얻은 값들을 Fourier 변환하여 최적화된 슬롯 안테나의 반사손실, 입력 임피던스, 복사 패턴을 주파수 영역에서 계산하였다. 이러한 결과로부터 최적의 안테나를 셜계 및 제작하였고, 슬롯폭이 16mm일때 약 35% 정도의 우수한 대역폭올 얻었으며, 이 계산값들은 측정치들과 비교적 잘 일치하는 특성을 얻었다. In this paper, a T-shaped microstrip feed line is proposed for a better impedance matching to the microstrip slot antenna in a various range of slot widths. It was found that the bandwidth of this antenna is proportional to the slot width. It was also found that the radiation resistance of this feed line structure is quite constant and low regardless to the slot width. A slot antenna with T-shaped microstrip feed line is analyzed by using the FDTD method. At first, the propagation process of the reflected wave and the electric field distribution in the time domain is calculated respectively. The antenna parameters also are optimized to get maximum band width, return loss, input impedance, and radiation pattern in the frquency domain by Fourier transforming the time domain results. From the computed results, the optimum slot antenna is designed and fabricated. When the slot width is 16 mm, approximately 35% of bandwidths are obtained without a matching circuit. These computed results using FDTD method were in relatively good accordance with the measured values.

      • 병렬 개방-스터브를 갖는 전자기 결합 광대역 마이크로스트립 슬롯 안테나의 해석 및 특성

        장용웅 에스케이텔레콤 (주) 2001 Telecommunications Review Vol.11 No.2

        본 논문에서는 병렬 개방-스터브가 삽입된 전자기 결합 마이크로스트립 슬롯 안테나를 FDTD(Finite difference Time Domain) 법을 사용하여 해석하고, 최대 대역폭을 갖는 안테나를 최적화 설계한 후에 제작 및실험하였다. 대역폭을 증가시키기 위해 T-모양 급전 구조에 병렬 스터브를 삽입하여 다층(2-층)의 유전체에 전자기적으로 결합시키는 새로운 방법을 제시하였다. 본 논문에서 제시한 한 방향으로만 복사체를 갖는 슬롯 안테나는 단일 지향성과 광대역성 특성을 갖는다. FDTD 법으로 모델링하여 전계의 진행과정과 전계분포를 시간 영역에서 각각 계산하였고, 이를 Fourier 변환시켜 안테나의 반사손실, 전압 정재파비를 주파수 영역에서 각각 계산하였다. 측정한 결과, 안테나의 % 대역폭은 중심 주파수 2.5GHz에서 54%의 광대역 특성을 얻었으며, 기존의 급전 구조의 대역폭보다 1.5배 이상 개선시켰다.

      • 십자형 급전선을 갖는 광대역 마이크로스트립 슬롯 안테나의 특성 분석

        장용웅,한석진,신호섭,김명기,박익모,신철제,Jang, Yong-Ung,Han, Seok-Jin,Sin, Ho-Seop,Kim, Myeong-Gi,Park, Ik-Mo,Sin, Cheol-Je 대한전자공학회 2000 電子工學會論文誌-TC (Telecommunications) Vol.37 No.3

        본 논문에서는 십자모양의 마이크로스트립 급전선을 사용하여 슬롯 폭이 넓은 경우 기존의 급전선 구조보다 쉽게 정합을 이룰 수 있는 방법을 제시하였다. 마이크로스트립 안테나의 단점인 좁은 대역폭을 확장시켰으며, FDTD법을 이용하여 십자형 급전구조를 갖는 광대역 마이크로스트립 슬롯 안테나의 특성을 해석하고, 최대 대역폭을 갖는 안테나를 제작 및 실험하였다. FDTD법으로 모델링하여 전계분포를 시간영역에서 계산하였고, 이를 Fourier변환시켜 슬롯 안테나의 반사손실, 전압 정재파비, 입력 임피던스, 복사패턴을 주파수 영역에서 계산하였다. 슬롯의 폭(Ws), 수평 급전선의 길이(l/sub d/)와 수직 급전선의 길이(l/sub u/), 그리고 offset에 따라 대역폭이 변화하였다. 이러한 결과로부터 최적화할 때, 전압 정재파비가 2이하인 대역폭은 1.975 GHz에서 4.725 GHz로 약 1.3 옥타브의 광대역 특성을 얻었다. A cross-shaped microstripline-fed printed slot antenna having wide bandwidth Is presented in this paper. The proposed antenna is analyzed by using the Finite-Difference Time-Domain (FDTD) method. It was found that the bandwidth of the antenna depends highly on the length of the horizontal and vertical feedline as well as the offset position of the feedline. The maximum bandwidth of this antenna is from 1.975 GHz to 4.725 GHz, which is approximately 1.3 octave, for the VSWR $\leq$ 2. Experimental data for the return loss and the radiation pattern of the antenna are also presented. and they are in good agreement with the FDTD results.e FDTD results.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼