RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI우수등재

        재유화형 폴리머를 혼입한 폴리머 시멘트 모르타르의 내화특성

        장건영,류동우 대한건축학회 2019 大韓建築學會論文集 : 構造系 Vol.35 No.2

        재유화형 폴리머 시멘트 모르타르의 내화성능 평가 결과, 폴리머 혼입율이 증가할수록 가열 온도에 따라 잔존 압축강도가 감소하는 것으로 나타났으며, 이는 폴리머 필름의 용융으로 인한 결과로 판단된다. 또한, 혼입율이 증가할수록 폴렬현상이 빈번하게 발생하였으므로, 폴리머 시멘트 모르타르를 사용한 단면복구를 진행할 경우 상기의 내화성능을 고려한 보수재료의 선정이 이루어져야 할 것으로 판단된다. In this study, the fire resistance performance of polymer cement mortars which are used as a representative repair material for section restoration, is evaluated and residual bond strength is measured by considering unity with concrete. According to the evaluation of fire resistance performance of re-emulsification type polymer cement mortars, residual compressive strength was drastically decreased according to heating temperatures with an increase of polymer addition rate, and this seems to be attributable to the application of polymer film. In addition, an explosion phenomenon occurred frequently with an increase of addition rate, so this should be considered when selecting repair materials and processing.

      • KCI등재

        고온에 노출된 재유화형 폴리머를 혼입한 폴리머 시멘트 모르타르의 잔존 부착강도 특성

        장건영,류동우 한국콘크리트학회 2019 콘크리트학회논문집 Vol.31 No.4

        화재피해를 입은 건축물의 보수・보강은 크게 「회복 목표의 설정」, 「보수・보강 범위의 설정」, 「보수・보강공법의 선정」의 과정으로 이루어지며, 일본의 경우 회복목표의 설정에 있어 구조 안전성과 내화성 항목은 화재피해 손상 정도와 관계없이 설계 시의 설계조건을 만족하는 것이 표준이다. 특히 내화성의 경우 모든 보수재료에 대해 내화성을 반드시 요구할 필요는 없지만, 현재 철근의 내화피복 역할을 담당하는 피복 콘크리트의 보수재료로서 수지계의 재료를 이용한 것이 많기 때문에 콘크리트 이외의 재료를 이용한 경우는 보수재료의 내화성능을 콘크리트와의 일체성도 포함해서 확인할 필요가 있다. 따라서 본 연구에서는 대표적인 단면복구 보수재료로 사용되는 폴리머 시멘트 모르타르의 고온 시 콘크리트와의 일체성을 고려한 잔존 부착강도를 측정하였다. 그 결과 재유화형 폴리머 혼입률 및 가열 온도증가에 따라 잔존 부착강도가 현저히 감소하였으며, 이는 SEM 측정결과와 같이 폴리머 필름의 용융으로 인한 결과로 판단된다. 또한, 폴리머 혼입률이 증가할수록 고온 시 폭렬 현상이 빈번하게 발생함에 따라 폴리머 시멘트 모르타르를 사용하여 단면복구를 진행할 경우 상기의 내화성능을 고려한 보수재료의 선정이 이루어져야 할 것으로 판단된다.

      • 비엔나협약규정 신호체계와 우리나라 신호체계에 관한 비교연구

        장건영,이정윤,김진태,명순 東亞大學校 建設技術硏究所 2004 硏究論文集 Vol.27 No.2

        20세기 말 국제사회는 정치 경제적인 교류 · 협력의 증가에 따른 국제 경제활동 빛 여가활동범위의 확대로 국가간 방문교류가 증가했다. 1968년 국제연합 (UN, United Nation)은 국제도로교통을 활성화하고 도로안전의 증진을 위하여 도로교통에 관한 국제협약인 도로교통협약(Convention on Road Traffic)과 표지 및 신호체계협약(Convention on Road Signs and Signals)을 선포하였다 2002년 10월 기준으로 표지 벚 신호체계협약에는 50개국이 가입하였고 도로교통협약에는 60개국이 가입한 상태이다. 국내에서는 도로교통에 관한 이 국제협약이 ‘비엔나협약’이라고 통칭되고 있으며 1968년에 버엔나협약 제정시 승인 서명만 했을 뿐 비엔나협약에 가입하지 않았다. 이에 본 연구에서는 비엔나협약의 신호체계와 극내 신호체계를 비교하여 (1) 그 차이점을 분석하고, (2) 비엔나협약 표지 빛 신호체계협약 가업을 가정시 유발되는 문제점에 대한 개선사항에 대해 분석하고자 하였다. 분석결과 차량 신호등의 형태 및 가변형 가변등의 형태 녹색등 황색등 적색등의 동일 색의 화살표시등으로의 교체 가능성 여부, 녹색등화 적색등화 황색등화의 의미, 적색등화 점멸의 의미, 화살표시등의 등화, 녹색등과 적색 및 황색등과의 동시 등화 운용여부 등에서 차이점이 있는 것으로 분석되었다. 또한 비엔나협약 표지 및 신호체계협약 가업을 가정시 유발되는 문제점에 대한 개선사항으로는 (1) 도로교통법의 적색신호 및 황색신호 시 우회전허용 또는 비보호 우회전 허용에 관한 내용의 검토, (2) 국내에 현재 운영중언 4색등의 사용을 금하고 직진 및 좌회전 두 개의 전용 신호등으로 구분한 신호등 재설치 및 이에 따른 국내 지역제어기 교체 검토 빛 새로운 지역제어기의 운영 소프트웨어 개발 검토, (3) 가변형 가변등의 가변차로 전환 신호기의 교체 검토, (4) 도로교통법에서의 적색신호등의 점멸에 관한 내용의 검토, (5)도로교통법에 화살표시등에 대한 법규정 신설에 관련된 내용 검토 및 현장에서 운영되고 있는 하향 황색 화살표시의 방향을 상향으로 전환에 관한 검토, (6) 도로교통법에 자전거 전용신호등에 대한 법규정 신설에 관련된 내용 검토, (7) 비엔나협약 표지 및 신호체계협약에 따라 수정되는 신호체계에 대한 기존 운전자 재교육의 필요성 검토가 필요한 것으로 분석되었다.

      • KCI우수등재

        습도조절용 세라믹패널 및 도료의 흡 · 방습성능 평가

        장건영(Jang, Kun-Young),류동우(Ryu, Dong-Woo) 대한건축학회 2018 大韓建築學會論文集 : 構造系 Vol.34 No.3

        This study is conducted to evaluate the performance of ceramic panels and painting materials for humidity control which are developed in non-plastic room temperature hardening structure as part of a project to improve a residential environment for the low-income class, rather than the performance of high-priced humidity control materials that are produced with the existing plasticity processing. The testing methods included the measurements of absorption & desoprtion of humidity per material; Mock-up Testing; an evaluation method of comparing the absorption & desoprtion performances of Ecocarat, ceramic panels and painting materials through Living Lab. According to the measurements of absorption & desoprtion per material, ceramic panels, E panel, and ceramic painting material showed 73.3g/m2, 96.6g/m2, and 111.1g/m2, respectively. That is, the performance of humidity control of each material was found to be good in the order of: Ceramic Paint > E panel > Ceramic Panel. According to performance evaluation testing with Mock-up test and Living Lab, Ceramic Paint, Ecocarat, and Ceramic Panels showed better absorption & desoprtion performances in the order.

      • 저가보급형 습도조절용 세라믹패널 조습성능 평가

        장건영 ( Jang Kun-young ),류동우 ( Ryu Dong-woo ) 한국건축시공학회 2017 한국건축시공학회 학술발표대회 논문집 Vol.17 No.1

        In this study, the performance of low-priced ceramic panels developed to improve the poor interior residential environment of the underprivileged was evaluated by comparing them with the performance of I Company (Japan)`s Eco karat, a representative humidity control panel. Experimental results showed that the humidity control performance of the Ceramic panel was 53.33g/m<sup>2</sup>, which was about 54% less effective than 98.88g/m2 of the Ecokarat. As a result, it is believed that the need to improve the quality of the Ceramic panels.

      • 저가보급형 습도조절용 세라믹패널의 조습성능 평가 - 리빙랩 온·습도 모니터링 분석을 통한 실측결과를 중심으로 -

        장건영 ( Jang Kun-young ),류동우 ( Ryu Dong-woo ) 한국건축시공학회 2017 한국건축시공학회 학술발표대회 논문집 Vol.17 No.2

        This study aims to evaluate the humidity control performance of low-priced generic ceramic panels that are used to control humidity. Temperature and humidity are monitored by using ‘Living Lab’ and the change of indoor relative humidity is measured and analyzed. According to the results of the study, the indoor relative humidity of rooms installed with ceramic panels was found to be low compared to that of living rooms by 2.2%RH (test period) and 3.2%RH (daily). In the case of maximum relative humidity, rooms installed with ceramic panels were found to be low by 6.9%RH. The results are attributable to the humidity absorption of ceramic panels. Accordingly, future ceramic panels need the improvement of performance and an appropriate construction area should be derived depending on indoor space.

      • KCI우수등재

        다가구 주택 반지하세대의 주거환경 분석

        장건영(Jang, Kun-Young),류동우(Ryu, Dong-Woo) 대한건축학회 2018 大韓建築學會論文集 : 構造系 Vol.34 No.2

        This study was conducted to investigate the living environment of semi-basement housing units in multi-household houses. It analyzed measurements of temperature and humidity obtained from the housing units. For this study, temperature and humidity sensors were installed in 10 semi-basement housing units to measure interior temperature and humidity for 13 months. A survey was conducted to get information about the occurrence of dew condensation and mildew and to investigate residents" satisfaction level with the residential environment. According to the result, all the housing units under study had dew condensation and mildew. The average summer temperature of the 10 housing units was 27.84℃, and average humidity was 64.91%RH, while the average winter temperature was 20.6℃, and the average humidity was 40.12%RH. Depending on the condition of each housing unit, deviation was big. Residents" average level of satisfaction with the living condition was 2.03 which shows a low satisfaction (on a scale of 1-5 with 5 being completely satisfied.).

      • KCI우수등재

        재유화형 폴리머를 혼입한 폴리머 시멘트 모르타르의 기초적 특성

        장건영(Jang, Kun-Young),류동우(Ryu, Dong-Woo) 대한건축학회 2018 大韓建築學會論文集 : 構造系 Vol.34 No.11

        According to the evaluation of basic properties and mechanical characteristics of polymer cement mortars that contain re-dispersible type polymer, in the case of fresh mortars, flow and air content were increased due to the dispersion action of entrained air and surfactant with an increase of polymer addition ratio. In the case of mortars after hardening, flexural strength, bonding strength, absorption rate and carbonation resistance were improved due to the increased union and waterproof characteristics of internal structures as a result of the formation of polymer film.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼