http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
TFT-LCD 단위 공정 시스템 통합을 위한 데이터 프레임 포맷
임은성(Eunsung Lim),황병현(Byunghyun Hwang),박기진(Kiejin Park) 한국정보과학회 2008 한국정보과학회 학술발표논문집 Vol.35 No.1
본 논문에서는 TFT-LCD 생산 라인에서의 시스템 통합에 필요한 데이터 프레임 포맷 표준화 방안을 연구하였다. 이를 위해 TFT-LCD 생산 라인을 구축 하는데 있어서 Glass 반송 작업에 필요한 데이터 프레임구조 및 32개의 Word로 구성된 데이터 필드를 정의하였다. 시스템 통합에 필요한 표준화된 Glass 데이터프레임 포맷을 사용함에 따라, 각 장비 제조사의 시스템 설계 기간 단축, 비용 절감, 셋업 기간 단축 등의 효과를 기대할 수 있다고 본다.
임은성(ES Lim),지영훈(YH Ji),한수정(SJ Han),송승욱(SW Song),성민준(MJ Sung),송원경(Wonkyong Song) 대한공간정보학회 2019 한국지형공간정보학회 학술대회 Vol.2019 No.11
가축 사육시 발생되는 분뇨 액비는 유기 화합물, 질산성질소 , 인산 등 비료성분이 함유되어 있어 농작물이나 과수에 거름으로 이용된다. 무분별하게 사용될 시 토양중의 성분이 용탈되어 지하수질에 영향을 미칠 수 있다. 본 연구에서는 제주도 현지를 방문하여 액비가 살포된 토양을 분석했다. 액비가 살포된 토양 시료 채집 후 Fieldspec4 (400-2500㎚) 장비를 이용하여 농도별 스펙트럼 추세 및 파장 대역에서 변화 양상을 관측했다. 액비가 살포된 토양의 농도를 추정하기 위해 초분광 영상에 PLSR(Partial Least Squares Regression)방법을 적용했으며, 사용된 초분광 카메라는 FX17e(900-1700㎚)로 제주도 현지에서 태양광으로 촬영했다. PLSR 분석의 종속변수는 채집한 액비시료를 보건환경연구원에 의뢰하여 얻은 실제 질산성질소의 농도값, 독립변수는 액비 농도별 초분광 영상의 반사율 값이다. 두 변수의 상관관계를 모델링하여 회귀식을 구한 후 예측모델을 개발했고, 두 변수사이 결정계수(R²)는 0.7로 상관성을 보였다. 지상용 초분광 카메라로 국소지점을 찍었을 때 고농도 액비 농도 추정이 가능할 것으로 판단되며, 광대역 모니터링 연구를 위해 항공기와 UAV로 촬영을 진행할 계획이다.
TFT-LCD 단위 공정 시스템 통합을 위한 장치간 인터페이스 타이밍 차트 설계
임은성 ( Eunsung Lim ),황병현 ( Byunghyun Hwang ),박기진 ( Kiejin Park ) 한국정보처리학회 2008 한국정보처리학회 학술대회논문집 Vol.15 No.2
본 논문에서는 TFT-LCD 제조 라인에서의 시스템 통합에 필요한 기술 중 하나인 장치간 인터페이스 방식에 대하여 연구하였다. 이를 위해 TFT-LCD 제조 라인에서 각각의 장비들이 Glass 를 반송하는 방법을 분석하였고 발생할 수 있는 모든 반송 방식을 각 TYPE 별로 정리하였다. 또한 각각의 내용을 분석하여 최적의 인터페이스 방안을 제안하였으며, 장치간 표준화된 인터페이스를 사용함에 따라 각 LCD 장비 제조사의 시스템 설계 기간 단축, 비용 절감, 셋업기간 단축, 향후 유지관리의 효율성 등의 효과가 기대된다.
공구자세의 연속제어를 통한 선박용 프로펠러의 5축 가공 표면조도의 개선
손황진(Hwang-Jin Son),임은성(Eun-Seong Lim),정윤교(Yoon-Gyo Jung) 한국기계가공학회 2012 한국기계가공학회지 Vol.11 No.2
A marine propeller is designed for preventing cavitation priority. Cavitation is a phenomenon which is defined as the vibration or noise by dropping the pressure on the high-speed rotation of the propeller. There has to be a enough thrust on the low-speed rotation for preventing cavitation. Thus, it has to be considered in the increasing of the number of blade and the angle of wing to design the propeller. In addition, flow resistance will be increasing by narrowing the width between blades. So high quality surface roughness of the hub to minimize flow resistance is required. Interference problems with tool and neighboring surfaces often take place from this kind of characteristics of the propeller. During 5-Axis machining of these propellers, the excessive local interference avoidance, necessary to avoid interference, leads to inconsistency of cutter posture, low quality of machined surface. Therefore, in order to increase the surface quality, it is necessary to minimize the cutter posture changes and create a continuous tool path while avoiding interference. This study, by using a MC-space algorithm for interference avoidance and a MB-spline algorithm for continuous control, is intended to create a 5-Axis machining tool path with excellent surface quality. Also, an effectiveness is confirmed through a verification manufacturing.
황종대(Jong-Dae Hwang),임은성(Eun-Seong Lim),정윤교(Yoon-Gyo Jung) 한국기계가공학회 2011 한국기계가공학회지 Vol.10 No.2
5-axis NC machining has a good advantage of the accessibility of tool motion by adding two rotary axes. It offers numerous advantages such as expanding machining fields in parts of turbo machineries like impeller, propeller, turbine blade and rotor, reasonable tool employment and great reduction of the set-up process. However, as adding two rotary axes, it is difficult to choose suitable machining conditions in terms of cutter path and cutter posture at a cutter contact point. Therefore in this paper, it is proposed to decide suitable machining condition through an experimental method such as adopting various cutter paths, cutter postures types. Also, in order to increase the efficiency of 5-axis machining, it is necessary to minimize the cutter posture changes and create a continuous cutter path while avoiding interference. This study, by using an MC-space algorithm for interference avoidance and an MB-spline algorithm for continuous control, is intended to create a 5-axis machining cutter path with excellent surface quality and economic feasibility. finally, this study will verify the effectiveness of the suggested method through verification processing.
선삭가공에서 초내열합금 |ncone| 600의 가공성 평가
원종식(Jong-Sik Won),임은성(Eun-Seong Lim),정윤교(Yoon-Gyo Jung) 한국기계가공학회 2011 한국기계가공학회지 Vol.10 No.6
Recently, super heat-resistant alloy Inconel 600 come into spotlight as the material of airplane parts but this material causes lots of problems that is, reduction of machinability and attritious wear and breakage of cutting tool during turning processing due to high temperature strength and cohesion between tool material and Inconel 600. Therefore, in this study, it was purposed to determine tool material kind and to select of proper cutting range when turning process was carried out for Inconel 600. In order to these Purpose, coated carbide tool and ceramic tool was used in this experiment and the machinability of Inconel 600 was investigated from perspective of the cutting force, chipping and wear of tool and deposition phenomenon of chip.
공황장애 환자의 스트레스 대처방식과 신체 증상 지각에 대한 인지적 특성
정해원,이무석,박우영,양종철,임은성,박태원,정영철,정상근,황익근,Jung, Hae-Won,Lee, Moo-Suk,Park, Woo-Young,Yang, Jong-Chul,Lim, Eun-Sung,Park, Tae-Won,Chung, Yong-Chul,Chung, Sang-Keun,Hwang, Ik-Keun 대한불안의학회 2007 대한불안의학회지 Vol.3 No.2
Objective : The purpose of this study was to investigate the strategies used to cope with stress and the cognitive characteristics of somatic symptom perception in patients with panic disorder. Methods : A total of 101 patients who met the DSM-IV criteria for panic disorder and 60 normal controls were recruited for participation in this study. We evaluated the subjects using The Way of Stress Coping Questionnaire (SCQ), Somato-Sensory Amplification Scale (SSAS), Symptom Interpretation Questionnaire (SIQ), and the Panic Disorder Severity Scale (PDSS). We analyzed the data using an independent t-test and Pearson correlation analysis (p<0.05). Results : The patients who used emotionally focused coping strategies scored significantly lower on the SCQ. The patients with panic disorder showed greater amplification of body sensations in the SSAS, a significantly higher score on the physical interpretation subset of the SIQ, and a lower score on the environmental interpretation subset of the SIQ than the normal controls. The PDSS scores were positively correlated with the SSAS score and physical interpretation score on the SIQ. Conclusion : These results show that patients with panic disorder have poor emotionally focused strategies for coping with stress, greater amplification of body sensations, and a tendency towards a physical interpretation of somatic symptoms.