http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
농경지 및 공장지역 토양 내 중금속 존재형태와 토양 특성과의 상관성 평가
이홍길,김지인,노회정,박정의,김태승,윤정기,Lee, Hong-gil,Kim, Ji-in,Noh, Hoe-Jung,Park, Jeong-Eui,Kim, Tae Seung,Yoon, Jeong Ki 한국지하수토양환경학회 2016 지하수토양환경 Vol.21 No.6
The Standards, Measurement and Testing Programme (SM&T-formerly BCR) extraction procedure was applied to fractionate Cr, Cu, Ni, Pb and Zn in 23 top soil samples into: (i) exchangeable phase; (ii) reducible phase; (iii) oxidisable(sulfides and organics bound) phase; and (iv) residual phase. Fractions of Cr and Ni were in the order of residual > oxidisable > reducible > exchangeable phase. The oxidisable phase was identified as dominant for Cu and Pb. Zn had the highest ratio of exchangeable phase in comparision to the other metals. The bioavailability and mobility were assessed to be the greatest for Zn, followed by a decreasing order of Pb, Cu, Ni and Cr. All metal average concentrations in topsoil samples was higher in industrial sites than in agricultural sites. Our results revealed higher concentrations in topsoil samples (0~15 cm) than in sub soils (15~30 cm, 30~60 cm) for most metals at six sites (No. 5, 6, 17, 19, 20, 23). The fractions of exchangeable, reducible ad oxidisable phases showed relatively high correlation with soil pH, Fe/Mn oxide concentrations and organic matter contents, respectively.
오염원 인근 토양 중 베릴륨(Be), 코발트(Co), 탈륨(Tl), 바나듐(V)의 농도분포 및 오염영향 평가
이홍길,노회정,윤정기,임종환,임가희,김현구,김지인,Lee, Hong-gil,Noh, Hoe-Jung,Yoon, Jeong Ki,Lim, Jong-hwan,Lim, Ga-Hee,Kim, HyunKoo,Kim, Ji-in 한국지하수토양환경학회 2018 지하수토양환경 Vol.23 No.4
Beryllium (Be), cobalt (Co), thallium (Tl) and vanadium (V) are candidates of 21 priority soil pollutants in Korea. The distribution of their concentration in soils from three contamination sources including industrial, roadside and mining areas was investigated. Concentrations of the metals were evaluated quantitatively using pollution indices and the fractionation of metals was conducted using modified SM&T (Standards Measurements and Testing programme) sequential extraction. Concentrations of the metals for all samples from industrial and roadside soils were within the range of natural background levels, while some of Be in soils from abandoned mines exceeded that the range. Enrichment Factor (EF) and Nemerow Integrated Pollution Index (NIPI) for Be, Co, Tl and V showed that there are effects or possibilities of anthropogenic activities. Pollution Load Index (PLI) analyses indicated all investigated sites needed further monitoring. The results of sequential extractions indicated mobile fractions (F1+F2) of Be, Tl and V were below 30% except some of Co in soil, which implies their low mobility to neighboring environment media. Variable tools like sequential extraction, comparison with background/actual concentration and pollution indices, as well as aqua regia extraction should be considered when evaluating Be, Co, Tl, V in soil.
고속 고정도가공에 기인하는 Servo System의 최적화와 기능특성에 관한 연구
이홍길(Hong-Gil Lee),김원일(Won-il Kim),최명환(Myung-Hwan Choi),백상엽(Sang-Yeob Baek) 한국기계가공학회 2009 한국기계가공학회지 Vol.8 No.2
The most dominate aspect in machine works using CNC devices in industrial production processes is the precision of the product and the Cycle Time. To this day, many studies on the external factors of the technology to reduce the Cycle Time have advanced amid to the advancements in cam soft development for manual programs and the numerous studies on high speed and precision machining. This study experimented various functions of the sequence pattern flow and arranged system development technologies of past few years to develop and applicate various usage of adjustment factors within the CNC, so it would be more understandable to the user and would enable them to make high speed and precision products more faster develop and. In order to reduce the Cycle Time, the mechanism of machine tools has to be analysed and applied, in addition to program reduction and improvement of the manufacture process.
고속 고정도 가공에 기인하는 SERVO SYSTEM의 최적화와 기능 특성에 관한 연구
이홍길(Hong-Gil Lee),김용대(Yong-Dae Kim),김영규(Yung-Kyu Kim),김원일(Won-Il Kim) 한국산업융합학회 2007 한국산업응용학회 학술대회 논문집 Vol.- No.-
고속 고정도 가공의 효과적인 가공이 이루어지려면 CNC 시스템 파라미터의 Servo Gain Dressing을 통하여 기구부와 서보 소프트 메카니즘이 최적화를 이루어야한다. 본 연구에서는 각종 측정기와 컴퓨터 기술의 발전에 힘입어 절삭시 가감속도의 최적화, 가공경로 오차의 감소, 기계에 쇼크를 주지 않는 원활한 이송등을 연구하여 시스템 구동의 최적화를 찾아냄으로써 실가공시 초래되는 절삭저항에 따른 장해를 미연에 방지하여 가공 정도는 물론 최적 조건에 맞는 고속가공의 최대 효율화를 이룰수 있으며 하드웨어적 공정개선과 소프트웨어적 공정개선을 파라미터 분석을 통하여 충분히 변화 가감시켜감으로써 고속 고정도 가공의 최적화를 구축 하였다.
감문갑(Moon-Gab Kam),이홍길(Hong-Gil Lee),강성기(Seong-Ki Kang),김원일(Won-Iil Kim),김태규(Tae-kyu Kim) 한국기계가공학회 2006 한국기계가공학회 춘추계학술대회 논문집 Vol.2006 No.-
Studied of friction surface and safety ratio of rotor disk key-hole edeg on the aircraft brake CFRC disk, The carbon fiber reinforced carbon composites(CFRC) material compares are necessary for the advanced industries that require the thermal resistance. and the development and research has been in progress in the field do aerospace and defense industry. CFRC have several merits and special properties such as excellent anti ablation, outstanding strength retention at very high temperature, high heat capacity and thermal transport, high specific stiffness and strenght, and high thermal shock resistance. they have been used on aircraft brake, rocket nozzle, nose cones, jet engine turbine wheels, and high speed craft. Especially, the technology CFRC was prohibited from importing and exporting the technology in accordance with MTCR(Missile Technology Control Regulation) and ITAR(International Traffic in Arms Regulation).
김지인(Ji-In Kim),이홍길(Hong-gil Lee),김도경(Dokyung Kim),안윤주(Youn-Joo An),황원재(Wonjae Hwang),현승훈(Seunghun Hyun),신선경(Sun-Kyoung Shin),김현구(Hyun-Gu Kim) 환경독성보건학회 2021 한국독성학회 심포지움 및 학술발표회 Vol.2021 No.5
토양환경보전법은 오염된 토양을 정화하는 등 토양을 적정하게 관리·보전함으로써 토양생태계를 보전하기 위한 법이다. 토양정화는 토양 내 오염물질을 감소·제거하거나, 오염물질에 의한 위해를 완화하는 것을 말한다. 우리나라는 오염부지를 대상으로 ‘15년에 첫 인체 위해성평가를 수행하였고, `19년부터 생태 위해성평가 도입을 준비하고 있으며, 유럽, 북미 등에서도 오염부지의 위해성평가는 인체 위해성에서 출발하여 환경상의 위해로 확장되었다. 네덜란드 및 캐나다는 잠재적으로 생태 수용체에 노출 가능성이 있는 모든 오염부지를 평가하는 반면, 영국은 법적으로 생태학적 가치가 높은 지역을 한정하여 평가하고 있다. 미국도 법적 환경보호지역이나 기타 보호해야 할 생태 수용체 대한 특별한 고려가 필요한 부지를 평가하는데, 대부분의 수퍼 펀드 부지는 고도로 산업화되어 생태 수용체가 없거나 생태 수용체에 나타난 악영향 중 오염지역과 관련된 부분을 구분하기가 어려우므로 생태위해를 저감하기 위한 정화가 불필요하다고 여긴다. 국외제도와 비교하여 국내에 도입하고자 하는 토양오염 생태 위해성평가는 오염부지 및 그 주변지역에 생태학적 가치가 높은 지역이 존재할 때 수행할 예정이다. 오염부지 내 오염물질이 생태학적 가치가 높은 지역에 노출될 가능성이 있을 경우 오염물질에 의한 생태학적 악영향 및 독성 수준이 평가된 후, 토양학-생태학-생태독성학적 결론을 종합하여 생태위해성이 평가될 것으로 사료된다. 위해성평가 평가 결과는 잠재적 위해보다 실제적인 위해에 초점을 맞출 필요가 있으며, 오염관리 보다 토양생태계 보호 및 보전의 관점에서 토양학, 생태학, 생태독성학 간 균형점을 찾는 것이 가장 중요하다고 판단된다.
수입돼지 및 개의 분변 유래 yersinia enterocolitica 균의 분포와 특성 I. 생물형, 혈청형 및 항생제 감수성
조현호(Hyun Ho Cho),이제용(Je Young Lee),서광욱(Kwang Wook Suh),이홍길(Hong Gil Lee),김옥경(Ok Kyung Kim),김용환(Young Hwan Kim),강호조(Ho Jo Kang) 한국예방수의학회 1994 예방수의학회지 Vol.18 No.2
A survey was conducted to see the distribution and characterization of Yersinia enterocolitica in imported pigs and dogs. 1. Out of 886 pigs and dogs, 205 strains of Yersinia enterocolitica were isolated from fecal samples of the pigs and dogs. One hundred twenty-seven strains(23.6%) and 78 strains(22.4%) Yersinia enterocolitica were isolated in pigs and dogs. 2. Two hundred five isolates of Yersinia enterocolitica the predominant biotype were 3B(47.3%) and followed by 3A(19.5%), 3(12.6%), 1(11.2%) and 2(9.2%). 3. Two hundred five isolates of Yersinia enterocolitica the belonged to serotype 0:3(70 strains, 34.1%), 0:8(57 strains, 27.8%), 0:5(27 strains, 13.1%), 0:1,2(26 strains, 12.6%), 0:9(10 strains, 4.8%) and untypable(6 strains,7.6%), among them strains of serotype 0:3 and 0:8 were predominant. 4. Yersinia enterocolitica were susceptible to gentamicin(100%), kanamycin(100%), tobramycin(100%), nalidixic acid(99.5%), chloramphenicol(98.5%), tetracycline(97%) and resistant to cephalothin(99.0%), erythromycin(95.1%) and ampicillin(94.1%).