http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Folded Reflectarray를 이용한 고이득 94 GHz 모노펄스 안테나
이한승,채희덕,전종훈,남상욱,Lee, Han-Seung,Chae, Hee-Duck,Chun, Jong-Hoon,Nam, Sang-Wook 한국전자파학회 2008 한국전자파학회논문지 Vol.19 No.1
본 논문은 94GHz를 중심 주파수로 하며, 모노펄스 형식의 추적 레이다 시스템에 사용되는 folded reflectarray 안테나를 제안한다. 추적 레이다는 대부분 목표물로부터 반사되어 돌아온 반사 신호들을 비교하여 목표물을 찾으며, 모노펄스 형식에서는 이러한 신호들의 비교를 동시에 수행한다. 본 논문에서 제안한 모노펄스 형식의 folded reflectarray 안테나는 polarizing grid, reflectarray, 다중 모드 feed horn, 그리고 도파관으로 제작된 comparator로 이루어져 있다. 제작된 안테나는 다중 모드 feed horn과 comparator의 모노펄스 급전부에 의해 sum 모드, azimuth 모드, 그리고 elevation모드, 이렇게 세 개의 방사 패턴 형식을 나타낼 수 있다. 측정 결과, sum 패턴에서는 36dB, azimuth 패턴에서는 33.5dB, 그리고 elevation 패턴에서는 27.2 dB의 이득을 확인할 수 있었다 This paper proposes a high-gain monopulse antenna using the folded reflectarray for a monopulse target-tracking radar systems designed at the center frequency of 94 GHz. In target-tracking radar systems, the angle of arrival of the incoming wave Is determined by comparing the signal received on two or more non-coincident antenna patterns. This is the physical basis of most target-tracking techniques and the comparison is made simultaneously in a monopulse radar systems. In this paper, the antenna consists of polarizing grid, reflectarray, multimode feed horn, and comparator implemented by wavguide. The antenna is able to have three radiation patterns by using the monopulse feed systems assembled by multimode feed horn and comparator. The antenna demonstrates maximum gains 36dB, 33.5dB and 27.2dB at sum mode, azimuth mode, and evevation mode respectively.
이한승 ( Lee Han-seung ),안종문 ( An Jong-moon ),신성우 ( Shin Sung-woo ) 한국구조물진단유지관리공학회 2002 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.6 No.2
The purpose of this research is to evaluate the effectiveness of lithium nitrate as a corrosion inhibitor in mortar containing chloride. In the experiment, test specimens of mortar to which chloride and lithium nitrite had been added, were subjected to accelerated corrosion by means of repeated drying and wetting on condition of high temperature. From the results of the experiments, it was confirmed that the lithium nitrite inhibitor over dosage 0.6 (NO<sub>2</sub>/CD molar ratio is very effective in protecting reinforcement from corrosion in mortar in which chloride ions have contain.
염해를 받는 RC구조물의 내구수명 평가에 관한 확률론적 연구
이한승(Lee Han-Seung),박원준(Park Won-Jun),김장욱(Kim Jang-Ook),이성민(Lee Sung-Min),경제운(Kyoung Je-Woon) 대한건축학회 2008 大韓建築學會論文集 : 構造系 Vol.24 No.1
Chloride attack of concrete structure is a primary factor to deteriorate concrete structures durability. For this reason, recently many researches of chloride ion penetration and diffusion have been conducted. But it is difficult that verification of accuracy of predicted durability of RC structures because chloride ion diffusion coefficient is diversity according to equivalent age, composition, environment. In this research, it can be produced a accuracy of durability life prediction through reliability assessment and propose a prediction method of chloride ion diffusion coefficient of concrete applied assessment program of reliability. By way of this, we make test materials using different admixture and calculate chloride ion diffusion coefficient by RCPT test at each equivalent age. On the basis of this result, we indicate reliability prediction formula through reliability analysis for durability life design using Montecarlo method. And we verify propriety through comparing and analyzing of this proposed formula with investigation data of chloride ion diffusion studied the inside and outside of the country.
수치모의를 통한 원자력 발전소 심층 취·배수 구조물 유·출입구 주변에서의 수리학적 흐름특성 고찰
이상화(Lee Sang Hwa),이성면(Yi Sung Myeon),박병준(Park Byong Jun),이한승(Lee Han Seung) 대한토목학회 2012 대한토목학회논문집 A Vol.32 No.2A
증기를 발생시켜 터빈(turbine)을 회전시키는 화력 및 원자력 발전 계통에서 냉각시설은 필수적인 구조물이며, 냉각수 순환 계통은 일반적으로 해수를 취수하여 발전소 내의 복수기까지 유입시켜 증기와 열 교환 후 다시 외해로 배출시키는 형태를 취하고 있다. 최근 냉각수 취·배수 방식을 표층 취·배수방식이 아닌 심층 취·배수방식으로 변경하고 있는데, 기존 원전의 재순환 온도에 대한 영향을 최소화하고 온배구 방류시 밀도차로 인한 부력으로 온배수 혼합효과를 높여 온배수에 의한 환경피해 범위를 최소화하기 위해서이다. 특히, 하절기에 저층의 저온 냉각수를 취수할 수 있다는 이점 때문에 향후 계획되는 발전소들도 심층 취·배수 방식을 도입할 것으로 예상된다. 본 연구에서는 원자력 발전소의 냉각시설 중 심층 취·배수 구조물의 입구 주변을 3차원 전산유체역학 코드인 FLOW-3DⓇ로 모사하여 그 흐름특성을 분석하였다. 취수구(intake)의 경우 연직취수 조건에서 유속 덮개(Veloeity cap), 배수구(diffuser)의 경우 방류수의 분사방향에 변화를 주어 모의하였으며, 그 결고 취수구의 경우 유속덮개에 의한 연직 유속성분의 현저한 감소로 인한 어류 유입영향을 최소화 할 수 있을 것으로 판단되며, 배수구 희석효과는 Jirka 및 Harleman이 제시한 2차원 온배수 프롬(frume)과 잘 일치 하는 것으로 나타났다. A cooling system is indispensable for the fossil and nuclear power plants which produce electricity by rotating the turbines with hot steam. A cycle of the typical cooling system includes pumping of seawater at the intake pomp house, exchange of heat at the condenser, and discharge of hot water to the sea. The cooling type of the nuclear power plants in Korea recently evolves from the conventional surface intake/discharge systems to the submerged intake/discharge systems that minimize effectively and in take temperature rise of the existing plants and that are beneficial to the marine environment by reducing the high temperature region with an intensive dilution due to a high velocity jet and density differential at the mixing zone. It is highly anticipated that the future nuclear power plants in Korea will accommodate the submerged cooling system in credit of supplying the lower temperature water in the summer season. This study investigates the approach flow patterns at the velocity caps and discharge flow patterns from diffusers using the 3-D computational fluid dynamics code of FLOW-3DⓇ. The approach flow test has been conducted at the velocity caps with and without a cap. The discharge flow from the diffuser was simulated for the single-port diffuser and multi-ports diffuser. The flow characteristics to the velocity cap with a cap demonstrate that fish entrainment can significantly be minimized on account of the low vertical flow component around the cap. The flow pattern around the diffuser is well agreed with the schematic diagram by Jirka and Harleman.