http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이철수,박광렬,Lee, Cheol-Soo,Park, Gwang-Ryeol 대한산업공학회 1998 산업공학 Vol.11 No.2
The letters of the automobile tire are usually engraved on the side-wall. The shape of the side-wall is a sculptured surface generated by the rotational sweeping of a profile curve. The letters laid on the side-wall are usually designed by a 2-dimensional CAD. It is impossible to machine the letters on the surface accurately by 3-axis NC machining, because the axis of cutter should be tilted to align with the normal vector of the surface. In this case. the degree of freedom for the machine is at least four. This paper describes an idea for tool path generation of a 4-axis machine by using the 2-dimensional CAD data of the letters and the surface of the side-wall. This study includes the following procedures; (1) measuring the profile of the side-wall surface and curve-fitting of the measured points. (2) the 'non-parallel projection' of the letters on the side-wall, and (3) an inverse kinematics of the 4-axis lettering machine. Procedures in this paper are programmed in C-language on Windows95 environment. With a PC based CNC controller and a 4-axis lettering machine. these are tested sucessfully for the practical use.
컴퓨터 비젼에 의한 PCB 검사를 위한 검사 정보 생성 시스템 개발
이철수,고은희,Lee, Cheol-Soo,Go, Eun-Hee 대한산업공학회 1998 산업공학 Vol.11 No.2
For the PCB inspection by computer vision, in some cases, the MRLC file should prepared. The MRLC file contains a RLC(Run Length Code) and a direction flag. In this paper, a generating method of MRLC is described. It is composed of two procedure as followings; (i) rasterizing Gerber file which is a vectorized image of PCB panel, and (ii) calculating a MRLC that is useful for the inspection as a template image. The suggested procedures are written in C-language and executable on Windows 95 and Windows NT.
이철수,Lee, Cheol-Soo 대한산업공학회 1996 산업공학 Vol.9 No.2
Recently, the tire mold of a passenger car is made almost via aluminum casting, and it is necessary to prepare a master model of the tire for the casting. Because of the geometrical feature of tire, as well known, the master model must be machined by a 5-axis NC machine. The paper proposes a procedure to model and machine the master model. The approach includes (a) transformation of 2D drawing of tire into 3D geometry, (b) modeling surfaces of tire, and (c) inverse kinematics of a 5-axis NC machine. An implementation of the proposed procedure is also presented.
선박용 플랫바의 자동 네스팅 및 가스/플라즈마에 의한 NC 절단
이철수,박광렬,Lee, Cheol-Soo,Park, Gwang-R. 대한산업공학회 1996 산업공학 Vol.9 No.3
The 'flat-bar' is a stiffener which is a component of ships. It is basically a long rectangle and has 'end-cut' shapes at both sides. The paper describes a fast nesting algorithm of the flat-bar, and a procedure to generate cutting path of gas/plasma torch, which is operated by a NC (numerically controlled) gas/plasma cutting machine. Proposed procedures are written in C-language and executable on VAX machine with Open VMS operating system.
피스톤의 형상 모델링 및 CNC 가공 데이터 산출용 소프트웨어 개발
이철수,이제필,김성복,Lee, Cheol-Soo,Lee, Je-Phil,Kim, Seong-Bok 대한산업공학회 1999 산업공학 Vol.12 No.1
A noncircular cutting such as a piston cutting has depended on the copy-machining because of its complex shape. But the copy-machining needs a master model and brings about a low quality of the piston caused by being worn out of the master model. And the lower cutting speed reduces the productivity. In this paper, for solving these problems, a specialized software system and its subsequent procedure are presented. The shape of a piston consists of an oval, an offset, recesses, and eccentricities. The paper describes these shapes as a consistent equation that is a function of the rotational angle and the position of longitudinal direction(Z-axis). It is simple to define the characteristic geometry of a piston and to generate a tool path for CNC machining. This paper proposes the a proper structure of a 4-axes CNC(Computerized Numerical Control) lathe for machining the piston. As well as X-axis and Z-axis, are attached to the machine a C-axis for rotation and a Y-axis for higher speedy prismatic motion parallel to X-axis.
TiO<sub>2</sub> Interlayer의 상변화에 따른 PLZT 박막의 구조 및 전기적 특성
이철수,윤지언,황동현,차원효,손영국,Lee, Chul-Su,Yoon, Ji-Eon,Hwang, Dong-Hyun,Cha, Won-Hyo,Sona, Young-Gook 한국진공학회 2007 Applied Science and Convergence Technology Vol.16 No.6
R.F. magnetron-sputtering 방법에 의해 $(Pb_{1.1},La_{0.08})(Zr_{0.65}.Ti_{0.35})O_3$ 박막을 $Pt/Ti/SiO_2/Si$, $TiO_2(interlayer)/Pt/Ti/SiO_2/Si$ 기판에 증착하고, $TiO_2$ interlayer에 의한 PLZT 박막의 특성을 고찰 하였다. $TiO_2$ interlayer의 증착조건을 변화시켜가며 단일상의 anatase 상과 rutile 상을 증착하였고, 그 위에 증착시킨 PLZT 박막의결정성을 x-ray diffraction(XRD)을 통해 분석하였다. 또한 $TiO_2$ interlayer에 의한 $PLZT-TiO_2$, $TiO_2-Pt$ 박막의 계면상태를 고찰하기 위해 glow discharge spectrometer(GDS) 분석을 행하였고, PLZT의 강유전 특성을 고찰하기 위해 전기적 측정을 행하였다. $TiO_2$ anatase 단일 상에 증착한 PLZT의 경우 (110) 방향으로 우선 배향됨을 알 수 있었고, 12.6 ${\mu}C/cm^2$의 잔류분극 값을 나타내었다. [ $(Pb_{1.1},La_{0.08})(Zr_{0.65}.Ti_{0.35})O_3$ ] thin films on the $Pt/Ti/SiO_2/Si$, $TiO_2(interlayer)/Pt/Ti/SiO_2/Si$ substrate were fabricated by the R.F. magnetron-sputtering method and considered their characteristics depending on $TiO_2$ interlayer. Changing the deposition conditions of $TiO_2$ interlayer, we obtained $TiO_2$ anatase single phase and rutile single phase. PLZT was deposited on these substrates and analyzed by x-ray diffraction(XRD) for there crystallinity and orientation. To investigate $PLZT-TiO_2$, $TiO_2-Pt$ interface, glow discharge spectrometer(GDS) analysis was carried out and we performed electrical measurements for dielectric properties of PLZT thin films. The PLZT thin film on $TiO_2$ anatase interlayer was found to have (110)-preferred orientation and 12.6 ${\mu}C/cm^2$ remaining polarization value.