http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이지형 ( Lee Ji-hyeong ),장덕영 ( Jang Duck-young ),이정근 ( Lee Jung-guen ),김승훈 ( Kim Seung-hun ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
기존의 단차가 있는 보의 접합상세에서 고강도 철근이 사용될 경우 하부 갈고리 철근의 요구정착길이 확보가 어렵거나 콘크리트 충전성이 저하될 우려가 있다. 본 연구에서는 단차가 있는 보에 대하여 SD700 고강도 확대머리철근의 겹침이음을 적용한 접합상세에 대한 이음성능을 평가하고자 단순보 형태의 실험체를 제작하여 휨 실험을 실시하였다. 실험변수는 겹침이음길이로 KCI2017식에서 제시하고 있는 정착길이를 토대로 계획하였다. 실험결과, 겹침이음길이가 50% 증가함에 따라 최대하중이 37.5% 크게 나타났다.
이지형 ( Lee Ji-hyeong ),장덕영 ( Jang Duck-young ),이정근 ( Lee Jung-guen ),김승훈 ( Kim Seung-hun ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
기존의 단차가 있는 보의 접합상세에서 고강도 철근이 사용될 경우 하부 갈고리 철근의 요구정착길이 확보가 어렵거나 콘크리트 충전성이 저하될 우려가 있다. 본 연구에서는 단차가 있는 보에 대하여 SD700 고강도 확대머리철근의 겹침이음을 적용한 접합상세에 대한 이음성능을 평가하고자 단순보 형태의 실험체를 제작하여 휨 실험을 실시하였다. 실험변수는 겹침이음길이로 KCI2017식에서 제시하고 있는 정착길이를 토대로 계획하였다. 실험결과, 겹침이음길이가 50% 증가함에 따라 최대하중이 37.5% 크게 나타났다.
SPH 기반의 가상 입자와 반발 벽을 이용한 향상된 경계 처리 방식도입과 해석 적용
이지형(Ji-Hyeong Lee),조인혁(Inhyeok Cho),장호영(Hoyoung Jang),이종수(Jongsu Lee),조광준(Kwangjoon Cho) 대한기계학회 2019 대한기계학회 춘추학술대회 Vol.2019 No.11
SPH(Smoothed Particle Hydrodynamics) is based on Lagrangian method and one of the meshless techniques that analyzes the fluid flow. Various research have been conducted on boundary conditions in the SPH method. Integral type boundary conditions is relatively simple method and have been used rather than other method. Boundary particle method also used to get more precise result in various research. In this work, improved integral type boundary condition introduced which is using fictious particle with repulsive wall and application in static and dynamic simulation. Hydrostatic and tank sloshing simulation was performed using to prove this method is stable. It was confirmed that the fluid particle does not penetrate wall boundary and result was physically acceptable.
이지형(Ji hyeong Lee) 전남대학교 법학연구소 2023 법학논총 Vol.43 No.1
지역주택조합은 조합원들이 초기 자금을 대어 토지를 확보한 다음 시공사 선정으로부터 공사에 이르기까지 모든 것을 이끌게 되므로 저렴한 가격에 사업을 추진할 수 있고, 손쉽게 내집마련을 할 수 있으며, 사업 추진 절차가 보다 간소하다는 장점이 있다. 그 반면 토지 소유권의 확보, 이주자 보상문제, 조합비리, 조합원 모집 과정의 허위・과장광고 등 문제로 사업이 지연・무산될 경우, 대부분 빈곤층 서민들이 금전적 피해를 입을 우려가 있다. 조합과 조합 가입자들 사이의 법적 분쟁은 계속 증가하였고, 이러한 추세는 최근의 부동산 경기침체로 더욱 심화될 전망이다. 대상판결은 지역주택조합의 조합원인 원고들이 조합을 상대로 조합 탈퇴 및 부담금 반환을 주장한 사안에서, 제기된 여러 가지 법정 쟁점 가운데 이른바 ‘안심보장증서’의 무효 주장을 받아들여 원고들의 부담금 반환청구를 인용한 사례라는 점에서 그 의의를 찾을 수 있다. 그러나 이러한 결론을 이끌어 낸 법리의 구성에는 문제점이 없지 않은데, 이는 변론주의의 한계 때문이라고 볼 수 있다. 지역주택조합사업으로 인한 피해와 문제점이 적지 않으므로 제도적 보완을 위한 논의가 필요하다. Local housing associations play leading role in in its project, such as purchasing land, selecting a construction company. With initial funds that the members of the associations provided, the associations can promote the project at an affordable price with a simpler procedure, so that the members can get houses easily. On the other hand, if a project is delayed or canceled due to problems such as taking land ownership, compensating for migration, internal corruption, and false or exaggerated advertising in the process of recruiting members, most of the poor and ordinary people may suffer financial damage. Legal disputes between Local housing associations and their members have continued to increase, and this trend is expected to further intensify due to the recent real estate economic downturn. There are cases the lower court accepted the invalidity of the so-called ‘Certificate of security’ among various legal issues raised and returned the contributions of the plaintiffs, where the plaintiffs, who are members of a Local housing association, claimed to withdraw the membership and return the contributions against the association. In this paper, a case mentioned in the sub-title(‘subject decision’) is discussed to find an institutional improvement of Local housing association system.
SD700 확대머리 철근의 겹침이음 상세를 적용한 단차가 있는 RC 보의 구조성능 평가
이지형 ( Ji-hyeong Lee ),김승훈 ( Seung-hun Kim ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 논문집 Vol.25 No.6
논문은 SD700 확대머리철근의 겹침이음을 이용한 단차가 있는 보의 접합상세를 개발하기 위하여 실시한 구조성능평가 실험결과를 나타낸다. 실험변수는 주철근의 겹침이음길이, 철근 항복강도, 단부정착상세 등이다. 모든 실험체에 대하여 춤이 작은 보(B2)의 하부 주 철근은 확대머리철근을 적용하였으며, 춤이 큰 보(B1)의 하부 주철근은 일자형 확대머리철근, 90°갈고리형 확대머리철근 등 두 가지 상세로 이음방법을 적용하였다. 실험결과, SD500과 SD600을 적용한 실험체들은 겹침이음부에서 모두 휨파괴되었으며, 이로 인하여 최대내력은 유사하게 나타났다. SD500을 적용한 실험체들에 대하여, B1의 주철근을 90°갈고리형 확대머리철근으로 적용한 상세가 확대머리철근에 비하여 겹침이음부의 수평균열을 억제하였다. SD700의 확대머리철근을 사용한 실험체는 취성적인 정착파괴가 나타났으며, 겹침이음길이의 증가에 따라 최대내력이 증가하였다. SD700의 확대머리철근을 사용한 실험체들은 실험체정착길이/이론정착길이에 대한 실험내력/이론내력이 ACI 318-19 식은 1.30~1.48로 나타났으며, KDS-2021 식은 1.14~1.30로 평가되었다. 이를 볼 때, ACI 318-19 산정식이 보다 보수적으로 정착길이를 평가함으로써 더 큰 안전율을 가지고 있었다. This paper conducts an evaluation of the structural performance of the lap splice detail of SD700 headed bar experiment for developing an RC beam with different depths joint details. The experiment variable is lap splice length, yield strength, and end anchorage of main reinforcements. For all specimens, a headed bar was applied to the main reinforcement of the beam with low depth (B2), and the beam with high depth (B1) was applied to the main reinforcement with two splice methods: straight headed bar and 90° hooked-headed bar. The experimental results were that specimens of applying SD500 and SD600 had the results of flexural fracture at the lap splice location, which maximum load was similar. For specimens of appling SD500, the 90° hooked-headed bar of B1, suppressed horizontal cracks in the lap splice section compared to the straight headed bar. Specimens of applying an SD 700 headed bar had the results of brittle anchorage failure. In addition, maximum load was increased with the lap splice length increasing. For specimens of applying SD700 headed bar, test for test maximum load/theoretical load for test development length/design development length were estimated to be 1.30~1.48 for the ACI 318-19 equation, and 1.14~1.30 for the KDS-2021 equation. Thus, ACI 318-19 equation had conservatively greater safety factors as estimated development lengththened.
이지형 ( Lee Ji-hyeong ),장덕영 ( Jang Duck-young ),이정근 ( Lee Jung-guen ),김승훈 ( Kim Seung-hun ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.1
기존의 단차가 있는 보의 접합상세에서 고강도 철근이 사용될 경우 하부 갈고리 철근의 요구정착길이 확보가 어렵거나 콘크리트 충전성이 저하될 우려가 있다. 본 연구에서는 단차가 있는 보에 대하여 SD700 고강도 확대머리철근의 겹침이음을 적용한 접합상세에 대한 이음성능을 평가하고자 단순보 형태의 실험체를 제작하여 휨 실험을 실시하였다. 실험변수는 겹침이음길이로 KCI2017식에서 제시하고 있는 정착길이를 토대로 계획하였다. 실험결과, 겹침이음길이가 50% 증가함에 따라 최대하중이 37.5% 크게 나타났다.