http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
슬릿휜-원형관 열교환기의 휜 형상에 따른 공기측 전열성능
이종휘(Jong Hwi Lee),임무기(Moo Gi Lim),강희찬(Hie Chan Kang) 대한설비공학회 2010 대한설비공학회 학술발표대회논문집 Vol.2010 No.6
The purpose of the present study is to investigate the air-side pressure drop and the heat transfer characteristics of slit fin-tube heat exchanger. Seven kinds of plane and slit fin tested numerically. The results obtained for the heat transfer, pressure drop, and fin temperature are compare and discussed. The S shape edged fin proposed to reduce fin area in the present work showed the comparable performance of the conventional plane and slit fin.
이종휘(Jong Hwi Lee),임무기(Moo Gi Lim),강희찬(Hie Chan Kang) 대한설비공학회 2009 설비공학 논문집 Vol.21 No.12
The purpose of the present study is to investigate the flow resistances and heat transfer characteristics of V-shaped circular fin-tube heat exchangers. Four types of V-shaped fins in which the fin areas are identical but the areas of the V-shaped portion are different have been tested numerically. The results obtained for heat transfer, pressure drop, and fin temperature are discussed in this paper. With increase in the area of the V-shaped portion, the pressure drop and heat transfer increase up to 40% and 24%, respectively, in the present test range.
석탄회를 활용한 경량기포 저강도 고유동화재의 최종비빔시간과 희석비에 따른 공학적 특성
이종휘(Lee Jong Hwi),나정흠(Na,Jeong Hum),이창기(Lee Chang Ki),천병식(Chun Byung Sik) 대한토목학회 2012 대한토목학회논문집 C Vol.32 No.1
석탄회를 주재료로 사용한 저강도 고유동화재는 다짐이 필요없고 재굴착이 용이한 고유동성의 재료로 개발되었다. 본 연구에서는 이를 구조물 뒤채움용으로 사용하기 위해 경량화에 초점을 맞춘 기포를 혼입한 경량기포 저강도 고유동화재의 기초 연구로써 최종비빔시간, 기포의 희석비에 따른 공학적 특성을 규명하여 최적비빔시간 및 최적희석비를 결정하였다. 기준 배합비를 중심으로 최종비빔시간과 희석비에 따라 플로우 시험, 기포슬러리의 단위중량측정 시험 및 일축압축강도 시험을 실시하였다. 시험결과, CASE N(최종비빔 4분, 희석비 2%), CASE O(최종비빔 4분, 희석비 3%)가 유동성(20cm 이상), 경량성(12~16kN/m³) 및 일축압축강도(800~1200kPa) 기준을 만족하는 것으로 나타나 이를 기준으로 구조물 뒤채움용 경량기포 CLSM재료를 제작 및 사용함에 있어서 참고가 될 수 있을 것으로 판단된다. CLSM (Controlled Low Strength Material) using coal ash, which has the advantages of self-leveling, self-compacting, flowability, easy re-excavation, has been developed. In this study, CLSM additionally mixed with foaming agent for structural backfill material, aimed at lightness of materials, was developed called light-weight foamed CLSM. As the basic study of this material, to determine the optimum final mixing time and dilution ratio of existing light-weight foamed CLSM, flow, slurry unit weight and unconfined compressive strength test according to each impact factor were performed at the standard mix proportion. As the results of tests, CASE N (Final mixing time 4 min, dilution ratio 2%), CASE O (Final mixing time 3 min, foam agents ratio 3%, dilution ratio 2%) were satisfied with the standard of flow test (above 20cm), slurry unit weight test (12~16 kN/m³) and unconfined compressive strength test (800 kPa~1200 kPa). These results will indicate the standard optimum final mixing time and dilution ratio of light-weight foamed CLSM for structural backfill.
이종휘(Jong Hwi Lee),임무기(Mu Gi Lim),강희찬(Hie Chan Kang) 대한설비공학회 2009 대한설비공학회 학술발표대회논문집 Vol.2009 No.-
The purpose of the present study is to investigate the flow resistance and the heat transfer characteristics of V type circular fin-tube heat exchanger. Four kinds of V type fin having the same fin area and the different span wise angle tested numerically. Test data for the heat transfer, pressure drop and fin temperature were shown and discussed. The pressure drop and heat transfer increased for decreasing the span wise angle up to 58% and 25% respectively.
이종휘(Lee, Jonghwi),김선주(Kim, Seonju),차경섭(Cha, Kyungsub),김선곤(Kim, Sunkon),천병식(Chun, Byungsik) 한국지반환경공학회 2012 한국지반환경공학회논문집 Vol.13 No.4
본 연구에서는 지오폴리머계 그라우트재(HIT)의 강도 및 내구성 특성을 분석하기 위하여 일축압축강도시험, SEM, 공시체 표면변화관찰 및 용탈시험을 실시하였다. 일축압축강도시험 결과, HIT의 경우 초기강도가 높고, 재령일이 경과할수록 강도가 증가하는 경향을 보였으나, SGR과 LW 경우 재령 28일 이후 강도가 감소하는 경향을 보였다. 이는 SEM 결과와 일치하였으며, HIT의 경우 지속적인 수화반응을 통하여 밀실한 형태의 C-S-H 수화물이 다수 분포함을 확인할 수 있어 물유리계 재료보다 강도 및 내구성이 우수한 칼슘실리케이트 수화물을 형성함을 알 수 있었다. 또한 공시체의 표면변화 및 용탈시험 결과에서도 양생 6개월이 지난 시점에서 HIT의 경우 양호한 표면을 유지했으며 중량감소율도 극히 미미했다. LW, SGR의 경우에는 표면의 수축정도가 심했으며, 중량감소율도 HIT보다 큰 것으로 나타나 내구성이 떨어지는 것으로 나타났다. 종합적으로 HIT가 물유리계 재료보다 강도, 내구성면에서 우수한 특성을 나타내는 것으로 나타나 해상구조물 그라우트재로 적합할 것으로 판단된다. In this study, strength and durability of a geo-polymer grout material(HIT) was investigated through unconfined compression strength tests(UCS)), scanning electron microscope(SEM), elution tests, and surface observations. UCS tests showed high initial strength and rapid continuous strength increments when compared to labile wasser glass(LW) and space grouting rocket system (SGR) grout materials, which showed strength reduction after 28 days. The higher strength was also reflected in SEM results which showed calcium silicate hydroxide(C-S-H) gels of the dense hydrate range, indicating higher strength and durability. Additionally, elution tests and grout surface observations showed HIT was in good condition and the decrease in weight was minor when under water for six months. LW and SGR showed the grout surface to be constricted and lower durability due to higher weight increase. These results and observations show HIT to be better suited for coastal structural applications than LW and SGR in long terms of strength and durability.