RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 학위유형
        • 주제분류
          펼치기
        • 수여기관
          펼치기
        • 발행연도
          펼치기
        • 작성언어
          펼치기
        • 지도교수
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 自動車 에어컨用 冷媒 HFC-152a와 HFC-152a에 CF3I를 混合한 共沸 混合冷媒 特性에 關한 硏究

        이종인 조선대학교 2001 국내박사

        RANK : 1871

        These days, an attention of environment has been increasing all over the world. To prevent green house effect and destruction of an ozone layer, an ozone destruction potential(0DP) must be zero and a refrigerant for low global warming potential(GWP) is needed. HFC-l34a, in which hydrogen is mixed instead of chlorine is a refrigerant used for automobile conditioners and its destruction potential is ecologically zero. However, it is not considered as a perfect substitutive refrigerant as its GWP is high. It is studied refrigerant mixtures in which HFC-l52a, HFC-152a and CF_(3)I with low GWP and zero ODP are mixed by experimentally and concluded as follows: 1. With the variation of speed of compressor outside temperature and flow rate, the heat of evaporator and compressor and coefficient of performance was varied, and influenced the air conditioner. 2. The heat of compressor with the variation of speed of compressor was increased but the heat of evaporator was almost same. Under the low speed of compressor and evaporator, cooling load was decreased in evaporator. 3. The pressure of evaporator was decreased with increasing the speed of compressor and the pressure of evaporator with the refrigerant HFC-152a was higher 24% than that of azotrope refrigerant, mixed with CF_(3)I 4. In outside temperature of 35℃, the heat of evaporator with HFC-152a was increased and required power was decreased than that with azotrope refrigerant mixed with CF_(3)I, but 40℃,the heat of evaporator was almost same and required power was increased. 5. In outside temperature of 45℃ the heat of evaporator with azotrope refrigerant mixed with CF3I was increased 20% and required power was decreased. 6. With increasing the compressor speed coefficients of performance with azotrope refrigerant CF_(3)I was increased than those of refrigerant HFC-152a. 7. When the outside temperature was 25℃ and the compressor speed was high working condition of automobile air conditioner was optimum.

      • 강박장애에 있어서 강박적 사고와 행동의 형태와 내용

        이종인 경북대학교 1992 국내석사

        RANK : 1855

        저자들은 1980년 1월부터 1990년 12월까지 11년간 경북대학교병원과 계명의대 동산의료원 정신과 외래에서 강박장애로 진단받은 160명의 환자를 대상으로, 병록지를 통해 얻은 강박증상의 특정적 양상인 강박적 사고와 행동을 형태와 내용으로 분류 조사하였으며 그 결과는 다음과 같다. 1) 강박적 사고의 형태와 내용에 있어서, 강박적 사고의 형태로는 두려움(35.9%)이 가장 많았고 생각, 의심, 영상, 충동의 순으로 나타났다. 강박적 사고의 내용으로는 오염(18.6%)이 가장 많았고 일상적 활동, 안전, 재난, 이상감각, 성, 질병, 과거, 죽음, 철학과 종교, 공격, 신체 왜곡의 순으로 나타났다. 강박적 사고의 형태와 내용을 연관시켜 보면 오염에 대한 두려움(15.2%)이 가장 많았고 안전에 대한 의심, 재난에 대한 두려움, 일상적 활동에 대한 의심, 질병에 대한 두려움, 이상감각에 대한 생각의 순으로 나타났다. 2) 강박적 행동의 형태와 내용에 있어서, 강박적 행동의 형태로는 확인(38.9%)과 청결(38.1%)이 가장 많았고, 세밀함, 회피의 순으로 나타났다. 강박적 행동의 내용으로는 일상적 활동(34.1%)이 가장 많았고 씻음, 안전, 뱉음, 만짐, 셈의 순으로 나타났다. 강박적 행동의 형태와 내용을 연관시켜 보면 씻음을 통한 청결(31.0%)이 가장 많았고 안전에 대한 확인, 일상적 활동에 대한 세밀함, 일상적 활동에 대한 확인의 순으로 나타났다. 3) 이상의 결과를 제 선행 연구들과 비교해 본 결과, 강박적 사고에서 가장 많이 나타난 오염에 대한 두려움과 강박적 행동에서 가장 많이 나타난 씻음을 통한 청결은 빈도 상으로 선행 연구들과 일치하였다. 반면에 그 외의 영역에서는 영역에 따른 다소 간의 차이점을 나타내고 있었는데, 특히 본 조사 결과 중 다른 연구 결과들과 두드러진 차이로 나타난 것은 안전에 대한 의심과 확인이었다. 이는 현대 한국사회의 불신, 불확실성, 불안정성과 관계하고 있지 않을까 추정해 보았다. This study was to investigate the form and content of obsessions and compulsions in the obsessive-compulsive disorder. The subjects of the study were 160 patients who were diagnosed as obsessive-compulsive disorder according to DSM-III or DSM-IIIR at the psychiatric outpatient clinics of Kyungpook and Keimyung University Hospitals over the period of 11 years, Jan. 1980-Dec. 1990. 237 obsessions and 126 compulsions were identified from the subjects and classified into form and content according to the classificatory system designed for this study. In the classificatory system, 6 categories of form and 13 categories of content for obsessions and 4 categories of form and 7 categories of content for compulsions were delineated. The results were as follows : 1) In obsessions, fear (35.9%) was the most common form followed by thought, doubt, image, and urge in order of the frequency of their occurrence. As the content of obsessions, contamination (18.6%) was most frequent followed by daily activities, security, harm, abnormal sensation, sex, illness, past, death, philosophy and religion, aggression, and body distortion. In combination of form with content, the fear of contamination (15.2%) was the most common theme followed by doubt about security, fear of harm, doubt of daily activities, fear of illness, and thought of abnormal sensation. 2) In compulsions, the forms of checking (38.9%) and cleaning (38.1%) revealed almost equally on the top followed by being meticulous and avoiding. As the content of compulsions, daily activities (34.1%) was most frequent in occurrence and then washing, security, spitting, touching, and counting were followed. In combination of form with content, cleaning through washing (31.0%) was the most common theme followed by checking for security, being meticulous of daily activities, and checking of daily activities. 3) Comparing the above results with the previous studies, the fear of contamination and the cleaning through washing were the most common themes. However, the doubt about and the checking for security in this study appeared remarkably in high frequency as compared with the previous studies performed in foreign countries. This may be supposed to reflect mistrust, uncertainty, and insecurity of modern Korean society.

      • 특징벡터간 유사도 측정을 통한 홍채 검증

        이종인 弘益大學校 大學院 2001 국내석사

        RANK : 1855

        현재 연구되어지고 있는 홍채인식 시스템의 일반적인 구성을 보면 영상획득, 전 처리, 특징추출, 인식/검증의 네 단계를 거치게 된다. 이 과정에서 최후 본인여부 의 판단이 내려지는 것은 인식/검증의 마지막 단계인데, 전체 등록된 사용자의 수가 적을 경우 '인식' 방법을 통해 사용자를 확인할 수 있게 되어 그 정확도가 상당히 높을 수 있다. 하지만 등록된 사용자의 수가 많은 경우 인식 방법에는 무리가 따르게 된다. 이에 따라 전자상거래와 같은 다수의 사용자를 보유하게 되는 시스템에서는 사용자 아이디를 함께 입력받아 본인 여부를 판단하는 '검증' 방법을 사용하는 것이 빠르고 효과적이라 할 수 있다. 본 논문에서는 기존에 사용되어지던 특징벡터의 일치율 또는 해밍 거리를 통한 검증방법에서 나아가 저용량 특징벡터에 적합하도록, 홍채영상으로부터 추출된 특징에 대해 적절한 양자화와 가중치를 두어 각 특징벡터 간의 내적을 통해 유사도를 측정함으로써 본인의 데이터와 타인의 데이터간의 차이를 크게 하여 향상된 성능의 홍채인식 시스템을 구현하는 방법을 제안한다. 아울러 시스템 성능의 향상을 위해 전처리 부분에 있어서 동공 경계의 정확한 검출 및 회전에 대한 보상을 고려하였다. Human Iris Recognition Systems are generally composed of four main modules; image acquisition, preprocessing, feature extraction, recognition/verification. The recognition/verification part shows the results for the identification of users. The method of identification can be classified into two categories; recognition or verification. Recognition is proper for the system with a small size of registered users and can be highly reliable. However, this is not proper for the system with a lot of users. Verification can be proper for the system with many users such as e-commerce system. Iris Verification system extracts the iris code from an iris image and decides whether or not the input iris image is matched with the registered image. Hamming distance and matching percentage between feature vectors have been used in verification. However, these are not proper for a small size of feature vectors, In this thesis, we propose a new method of verification using similarity between feature vectors, Similarity can be obtained by inner product of the results of quantizing and weighting the extracted features. Using similarity can make the verification system more reliable in the case of a small size of feature vectors. In addition, we propose a method for the detection of exact edge of pupil and an algorithm for the compensation head tilt of users.

      • TPA 의존성 HL-60 세포 분화유도중 Protein Kinase C 신호전달경로에 의한 DNA Topoisomerase Ⅱα유전자의 전사억제

        이종인 충남대학교 대학원 1998 국내박사

        RANK : 1855

        DNA topoisomerase II is a marker for the proliferation state of mammalian dells in culture, and the protein levels are markedly higher in exponentially growing cells than quiescent cells and can be downregulated by growth of the cells at high density and serum starvation. Transcriptional regulation of DNA topoisomerase IIa gene has been investigated during 12-O- tetradecanoylphorbol-13-acetate (TPA)-induced differentiation of HL-60 cells. DNA topoisomerase IIa (Topo IIa) mRNA and Topo II activity were reduced at 24 hr TPA-exposured HL-60 cells. The level of Topo IIa mRNA was also reduced in proportion to the concentration of TPA. TPA-repressed Topo IIa mRNA was slightly decreased in the cells related with cycloheximide, and almost disappered by actinomycin-Dpretreatment. TPA-repressed Topo IIa mRNA was almost restored by staurosporin pretreatment. One DNA-protein complex (inverted CCAAT-3 binding protein, I-CBP) and two complexes (ATF) were formed by DNA mobility shift when inverted CCAAT-3 element and ATF binding element were incubated with nuclear extract of undifferentiated HL-60 cells and vanished during TPA-induced differentiation, respectively. TPA-induced repression of ATF and I-CBP was also restored after pretreatment of staurosporin. These results suggest that the transcriptional repression of Topo IIa gene during TPA-induced differentiation of HL-60 cells may be mediated by the changes of transacting factors level on Topo IIa promoter and the change of binding activity of the transacting factors is related to protein kinase C-dependent signal transduction pathway.

      • CPU 급전 선로를 이용한 광대역 마이크로스트립 U 슬롯 안테나에 관한 연구

        이종인 연세대학교 대학원 2001 국내석사

        RANK : 1855

        본 논문에서는 마이크로 스트립 패치 안테나의 단점인 좁은 협대역 특성을 개선하고자 리액턴스 부가 방법중의 하나인 U 슬롯 구조와 적층구조를 사용한 광대역 마이크로스트립 안테나에 CPW 급전 방식의 광대역 임피던스 정합 회로를 결합한 안테나를 제안하고, 제안된 CPW 급전 선로에 대한 이론적인 분석과 실험을 통해 안테나의 특성을 분석, 고찰하였다. 특히 본 논문에 적용된 CPW 선로는 마이크로스트립 선로보다 분산이 적고, 접지면을 모두 동일평면상에서 구현함으로써 via-hole을 쓰지 않고 수동 소자나 능동소자의 직, 병렬 부착이 용이하여 회로를 소형화 할 수 있다. 또한 사용 기판의 두께와 무관하게 스트립 도체의 폭과 슬롯의 비에 따라 폭넓은 임피던스 변화를 실현 할 수 있고, 마이크로스트립 선로에 비해 결합량(coupling)이 작어 안테나의 배열 확장시 발생하는 인접소자간의 영향을 줄일 수 있다는 장점 때문에 최근 안테나 급전구조로써 많은 연구가 진행되고 있다. 본 논문에 적용된 CPW 급전선로의 종단에는 tapered-step 형태의 개방 스터브를 사용했는데, 이러한 구조의 분석을 위해 CPW 급전 선로에 대한 파라미터는 quasi-static 해석에 근거한 등각사상법을 사용하였고, 계단 형태의 불연속 해석을 위해서는 역시 quasi-static 해석에 근거한 경계요소법을 적용해서 그 특성을 분석했다. 적층구조에서의 아랫 패치에 뚫린 두 개의 슬롯은 커플링량의 상대적 증가로 인한 급전 선로의 크기 증가를 줄이고자 하는 의도로 적용하였다. 또한 제안된 안테나의 시뮬레이션을 통하여 각각의 광대역 기법에 대한 파라미터 변화를 면밀히 분석하여 각각의 특성을 분석한 뒤 실제로 제작해서 측정하였다. 제작된 CPW 급전 선로를 이용한 광대역 마이크로스트립 U 슬롯 단일 안테나는 중심주파수를 5.77GHz로 기준으로 해서 VSWR < 2인 대역폭이 5.485GHz∼6.227GHz (742MHz)로 12.67% ,CPW 급전 선로를 이용한 광대역 U슬롯 마이크로스트립 1×4 배열 안테나는 대역폭이 5.142GHz∼6.275GHz (1132.5MHz)로 19.836%의 광대역 특성을 보였다. 원역장(farfield)장비로 측정한 단일 안테나의 빔폭은 E 평면에서 65°, H 평면에서 각각 55°의 값을 나타냈으며, 교차 편파 레벨은 E 평면과 H 평면에서 각각 -15 dB, -11dB 이하의 값을 가졌다. CPW 급전 선로를 이용한 배열 안테나 설계에서 급전 선로 설계시 사용한 T-junctions이나 ben d와 같은 구조는 전파경로의 경로차에 의한 슬롯 모드를 발생시켜 안테나 성능저하의 원인이 되는데, 이러한 슬롯 모드에 의한 영향을 고려하여 안테나 설계치를 최적화 시켰다. 배열 안테나의 빔폭은 E 평면에서 67.3°, H 평면에서 각각 16.2°의 값을 나타냈으며, 교차편파 레벨은 E 평면과 H 평면에서 각각 -25dB, -15dB 이하의 값을 가졌다. 또한 E 평면에서 측엽 레벨이 -13dB 이하의 양호한 특성을 보였고, 방사패턴 장비의 프리스(Friis) 전송 공식을 이용한 직접 이득 계산법을 이용하여 구한 안테나의 이득은 단일안테나의 경우 중심주파수 5.77GHz을 기준으로 6.95dB, 1×4 배열 안테나의 경우에는 12.56dB의 안테나 이득을 보였다. 본 연구에서 제안한 안테나 시스템은 대역폭의 증가뿐만 아니라 CPW 급전구조의 고유한 장점을 살릴 수 있는 광대역 마이크로스트립 안테나로써 저가의 대량 생산이 용이한 소형, 경량, 박형의 환경 친화적 능동형 안테나 시스템에 활용될 것으로 기대된다. In this paper, we have proposed the new configuration of wideband antenna using CPW feed lines The new designed antenna has CPW feed line and U-slot to achieve the wide bandwidth and the better impedence matching possibilities. The use of CPW feed line can decrease the number of substrate. It compared with the same structure antenna fed by the microstrip feed line. Also, the parameters of CPW feed line were studied using the quasi-static approximation which is based on conformal mapping method. The analysis of CPW discontinuities such as the tapered- step structure and the open ended gap were studied using the quasi-static approximation which is based on boundary element method. Also, the equivalent circuit model of multi-layer antenna were proposed using the cavity model. The proposed antenna consists of upper patch, lower patch and CPW feed line. The upper patch has U-slot which is tuned resonant frequencies and the lower patch has two slots for coupling between the upper patch. Especially, to increase a coupling amount, two slots are used. The size of slots must be reduced to impedance matching of the antenna. Therefore, the wide-center CPW feed line can be used to achieve this through the fact that the coupling decreases with feed line width, The proposed antenna is etched on RT/duroid 5880 substrate haying ε_r=2.2, thickness 62mils for the upper substrate and 31mils for the lower substrate. Experimental results of return loss and radiation characteristics for the proposed antenna show the measured return loss and impedance loci on Smith chart of the proposed antenna, respectively. The impedance loci on Smith chart show a looped characteristic of VSWR<2 circle and means the various wideband method compensate for the rapid frequency variations of input impedance. In this case of the proposed single antenna, the measured impedance bandwidth shows 742MHz(12.67%, VSWR<2), from 5.4850Hz to 6.2270Hz and in this case of the proposed 1×4 array antenna, the measured impedance bandwidth shows 1132.5MHz(19.836%, VSWR<2), from 5.1420Hz to 6.2750Hz. The radiation patterns are measured at the resonant frequency and lower and upper bound frequency of the bandwidth. Three radiation patterns of each type have similar broadside radiation characteristics. In the proposed antenna, the cross-polarization has a higher level in the H-plane than the I -plane. These higher cross polarization level in the H-plane results from the slots cut on the patch. This paper would be a good reference for designing low cost, small size, linear polarized, environment-friendly antenna and effective wideband microstrip antenna design using the compound technique.

      • 빅토르 프랑클의 로고테라피에 대한 철학적 분석

        이종인 蔚山大學校 2019 국내박사

        RANK : 1855

        국문요약 본 논문은 빅토르 프랑클(Viktor E. Frankl)의 로고테라피를 철학적으로 분석한 연구이다. 로고테라피에 대해 이루어진 선행 연구들은 심리학적 연구에 천착되어 있었고, 철학적 분석은 본격적으로 시도되지 못한 한계를 지니고 있다. 필자는 빅토르 프랑클의 로고테라피를 철학으로 분석하기 위해 프랑클의 저작에서 밝혀놓고 있는 로고테라피의 세 기둥에 주목했다. 이에 따라 그의 로고테라피에 나타난 철학사상을 세 가지 영역으로 구분하여 분석했다. 삶의 의미로 표방되는 세계관 철학과 의지의 자유로 요약되는 철학적 인간론, 그리고 의미에의 의지로 표현되는 심리학이라는 영역이다. 프랑클의 로고테라피 철학의 토대를 분석하기 위해 프랑클에게 영향을 끼쳤던 사상들을 차례대로 살폈다. 첫째, 프로이트의 정신분석학과 아들러의 개인심리학을 개관하고, 그들이 프랑클의 로고테라피와 어떻게 연결되는지 분석했다. 둘째, 도덕철학으로 칸트의 형식윤리학과 셸러의 가치윤리학을 개관하고 프랑클과 어떤 관련을 지니는지를 분석했다. 프랑클은 앞선 심리학의 환원주의를 칸트와 셸러의 철학적 인간론을 통해 넘어섰다. 셋째, 쇼펜하우어와 니체의 의지철학을 개관하고, 로고테라피와의 관계를 분석했다. 로고테라피에 대한 철학분석의 결과는 다음과 같다. 첫째, 로고테라피는 철학적 인간론이다, 인간은 신체적‧심리적 존재이지만 이를 넘어선 정신차원의 존재이다. 신체적이고‧심리적으로 환원되지 않는 이유이다. 인간은 자유의지를 가진 존재로, 신체적‧심리적으로 결정된 상태 속에서도 태도의 자유를 잃을 수 없다. 프랑클은 셸러의 차원적 존재론을 수납하여, 육체적‧정신적 차원을 넘어 영적 차원론을 전개한다. 둘째, 로고테라피는 세계관철학이다. 인간은 자신을 둘러싼 세계에 대한 해석의 주체라고 본다. 허무와 무의미의 세계관을 거절하고 의미로 충만한 세상을 긍정하게 한다. 삶의 의미를 세 가지 가치와 연관하고 있는데, 창조가치와 경험가치 그리고 태도가치이다. 셋째, 로고테라피는 실존적 심리치료법이다. 인간은 궁극적인 것에 관심을 가지는 존재이다. 인간은 역경, 고통, 제약들로 인해서 좌절하는 존재가 아니다. 삶의 의미를 상실할 때, 절망하게 되는데 그 대용물로 인간은 쾌락과 권력과 같은 다른 것에 몰입한다. 로고테라피는 심리학적 차원을 넘어선 고차원적 접근으로 생물학적‧심리적으로 매워지지 않는 인간실존의 문제에 대응한다. 로고테라피에 대한 철학적 분석을 통해 이전 심리학과 선명하게 구분했다. 로고테라피는 생물학적인 차원과 심리적 차원을 넘어서 정신적‧영적 차원까지 포괄하는 철학적 인간학이다.

      • 서낙동강의 하상구조와 퇴적과의 상관성에 관한 연구 : 칼슘계 폐기물을 이용한 江의 중금속 저감 및 제거에 관한 가능성 연구

        이종인 仁濟大學校 大學院 2005 국내석사

        RANK : 1855

        서낙동강은 낙동강의 하류 대동수문에서 시작하여 녹산수문을 통하여 바다와 연결되고 조만강, 평강천 등의 지천과 연결되며 우리나라의 대표적 곡창지대인 김해평야의 중요한 수원이며 남해안으로 흘러들어 어자원에 많은 영향을 끼친다. 낙동강의 오염은 그 근원지인 태백에서부터 시작되며 대구의 비산 염색 단지 등의 오염이 하천에 가중되고 있으며 중간의 오염원(경산, 진주, 밀양, 양산의 공단과 종말처리장, 그리고 부산의 사상 장림공단 등)들에 의하여 점점 오염이 심각해지고 있으며 갈수기의 경우, 낙동강 전역이 만성 부영양화에 시달리고 있다. 오염물질들은 하천의 유량 및 유속, 하상 구조 등의 영향으로 하상의 저층에 퇴적 및 축적하게 된다. 하상에 퇴적되는 물질들은 산소가 충분히 공급되지 못하는 경우에 유기물의 분해가 일어나지 않고, 혐기성 반응이 진행되며 유기물이 고농축 된다. 이러한 퇴적물은 장기간 한 지역에 존재하여 점점 축적됨에 따라 지역적 오염을 가속화하는 원인이 되고 그 오염의 정도가 그 지역의 오염지표가 될 수 있으므로 1998년~2004년까지 서낙동강의 하상구조와 수심, 수질, 저토의 중금속 오염도를 조사하였다. 그 결과, 서낙동강의 하상구조는 평강천 유입부와 강동교 근처, 녹산수문 근처가 수심이 갑자기 깊어지는 dump형태를 띄고 있으며 이곳에서의 수질과 저토의 중금속 오염도가 다른곳에 비하여 상당히 높았다. 이에 하천의 하상구조와 퇴적과의 상관성을 보고, Dump형태를 이루고 있는 지점의 오염이 높은 저토의 저감방안으로 일반적으로 야적되거나 폐기되는 굴 패각, 재첩, 달걀껍질 등 칼�㎞�폐기물을 이용하여 수중이나 토양에 있는 중금속을 제거하는 가능성을 보고자 한다. The pollutant is riverbed by effect of flow of stream and structure of riverbed. If the pollutant exist in same place, it makes pollution more and more and a grade of pollution can be indicator of pollution at there. The other side, structure of riverbed is indicator of flow and sedimentation of pollutant. Usually dredged sediment is settled in ocean or a reclaimed land. But it contain many kinds of pollutant leaching from it, can makes the secondary problem in environment. For example, there are obstruction of growth of plant and pollution of underground water or surface water. The objectives of this work were, (1) to understand relationship between structure of riverbed and pollutant in sediments, (2) to product the tile of using sediment in western nak-dong river for purification of environment and application of resource, (3) a study on removal of heavy metals by calcium wastes

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼