http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
바이오/환경 센서 응용을 위한 응답특성이 향상된 초소형 용존산소 센서
이이재(Yi-Jae Lee),김정두(Jung-Doo Kim),박재영(Jae-Yeong Park) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
본 논문에서는 바이오/환경센서 응용을 위해 실리콘 기판위에 나노 동공구조 백금 전극을 작동전극으로 갖는 소형화된 용존산소센서를 설계 및 제작하고 그 특성을 분석하였다. 제작된 용존산소 센서는 15 ㎜ × 8 ㎜ × 0.6 ㎜의 소형화된 크기를 가졌으며, -0.9 V의 인가전위 시에 각각 산소 포화 상태와 무산소 상태에서 2.14 ㎃와 0.8㎃의 환원전류 특성을 보였다. 또한, 다양한 산소 농도상태에서 각기 다른 전류응답 차이를 보였다. 이를 통해서 다양한 산소농도에 대한 센싱특성을 검증하였다. 한편, 제작된 용존산소 센서는 전극제작에 사용된 나노 동공구조 백금 전극의 높은 촉매 특성에 기인하여 90% 전류응답 시간이 7초 이내로 기발표된 다른 연구들에 비해 현저히 향상된 응답특성을 보였다.
이이재(Yi-Jae Lee),정하철(Ha-Chul Jung),박재영(Jae-Yeong Park) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
Highly roughened and catalytic macroporous Au with Pt nanoparticles (macroporous Au-/nPts) hybrid electrode was fabricated and characterized for compact nonenzymatic glucose biofuel cell (BFC) applications. Extremely miniaturized two disk type macroporous Au-/nPts electrodes were fabricated and sandwiched with Nafion film for forming cathode and anode electrodes. The fabricated electrode exhibited highly catalytic characteristics in various glucose concentrations at ambient temperature and pressure. It also showed extremely large glucose power density of 22.2 μW/㎠ without being affected interfering species.
김정두(Jung-Doo Kim),이이재(Yi-Jae Lee),박재영(Jae-Yeong Park) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
본 논문에서는 Porous Au-Pt 전극을 기반으로 연료전극과 공기전극으로 구성된 초소형 메탄올 센서를 설계 및 제작하고 그 특성을 분석해 보았다. 제안된 Porous Au-Pt 전극은 Porous 구조의 금속을 만드는 방법 중 하나인 Templating기법을 적용하여 수백나노 크기의 Pore들을 가진 Porous Au 전극을 제작하였고 그 위에 수 나노 크기의 Pt particles을 전해 도금하여 제작되었다. 고분자 전해질막 층으로서 Nafion film은 전해 도금한 Porous Au-Pt 전극 사이에 삽입하고 hot Pressing 통하여 센서를 구성하였다. Porous Au-Pt 전극을 기반으로한 전기화학 메탄올 센서는 0.25 cm2 의 작은 전극 면적에도 불구하고 넓은 온도 범위 (20 ℃-100 ℃) 에서 온도에 따른 뛰어난 선형성(Correlation coefficient = 0.986)을 보였으며, 특히, 일정온도 (60 ℃) 에서 메탄올 농도 0 M에서 2 M 까지의 전류응답 특성을 측정, 분석 결과 메탄올 농도에 따른 9.6 ㎃/mM · ㎠ 의 민감도 및 10 초 이내의 응답시간 특성을 보였다.
말초 신경 신호 기록의 효율성 개선을 위한 전도성 폴리머가 적용된 생체삽입형 커프형 신경전극
박성진 ( Sung Jin Park ),이이재 ( Yi Jae Lee ),윤광석 ( Kwang Seok Yun ),강지윤 ( Ji Yoon Kang ),이수현 ( Soo Hyun Lee ) 한국센서학회 2015 센서학회지 Vol.24 No.1
This study demonstrates a polyimide nerve cuff electrode with a conductive polymer for improving recording signal quality at peripheral nerve. The nerve cuff electrodes with platinum (Pt), iridium oxide (IrOx), and poly(3,4-ethylenedioxythiophene): p-toluene sulfonate (PEDOT:pTS) were fabricated and investigated their electrical characteristics for improving recorded nerve signal quality. The fabricated nerve cuff electrodes with Pt, IrOx, and PEDOT:pTS were characterized their impedance and CDC by using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry. The impedance of PEDOT:pTS measured at 1 kHz was 257Ω, which was extremely lower than the value of the nerve cuff electrodes with IrOx (15897Ω) and Pt (952Ω), respectively. Furthermore, the charge delivery capacity (CDC) of the nerve cuff electrode with PEDOT:pTS was dramatically increased to 62 times than the nerve cuff electrode with IrOx. In ex-vivo test using extracted sciatic nerve of spaque-dawley rat (SD rat), the PEDOT:pTS group exhibited higher signal- to-interference ratio than IrOx group. These results indicated that the nerve cuff electrode with PEDOT:pTS is promising for effective implantable nerve signal recording.