http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이의수(Euy Soo Lee),조성구(Sung-Ku Cho),이용한(Yong-Han Lee),이명천(Myung-Cheon Lee),염세경(Se-Kyoung Youm) 한국공학교육학회 2006 공학교육연구 Vol.9 No.4
오늘날 공학도에게는 타 전공자들과 한 팀을 이루어 공동의 프로젝트를 효과적으로 진행해 나갈 수 있는 능력이 절실히 요구되고 있다 . 대학에서는 이러한 요구를 충족시키기 위한 방안으로 복합학제 설계교 육의 중요성이 커지고 있다 . 본 논문에서는 동국대학교에서 수행하였던 복합학제 설계교육의 사례를 통해 그 효과를 정량적으로 측정하고 분석하여 보았다 . 단일전공자로 구성된 팀들과 복합전공자로 구성된 팀들간의 학업성취도를 비교분석한 결과 복합팀의 학업성취도가 높은 것으로 나타났다 . 또한 설문조사를 통해 학생들은 팀의 의사소통이 프로젝트를 진행하는데 중요한 요소라고 생각하였으며 이러한 결과는 복합학제 설계교육이 더욱 확대될 필요가 있으며 이를 통해 학생들이 사회에 나가기 전 수업을 통해 꾸준히 연습되어야 함을 보여준다 . Today it is critical for all engineers to have the capability of interacting in teams with members of different background and to meet the challenges that they will encounters in their careers . To satisfy such needs multidisciplinary engineering - design courses are attracting more attentions than ever in the engineering education community . In this paper we analyze the learning effectiveness of interdisciplinary design teams in an engineering design course in Dongguk University . The comparison analysis between monodisciplinary teams and interdisciplinary ones demonstrates higher learning effectiveness of interdisciplinary teams . In addition , the student evaluation of learning effectiveness points out that communication skill is one of the most important factors for a successful project . Such results show that multidisciplinary design courses must gain wider acceptance in engineering education and engineering students must have more chances to experience multidisciplinary teamwork .
토목, 화공, 전자 분야의 공학교육에 대한 산업체 설문조사 분석
김병일,이의수,박진우,Kim Byoung-Il,Lee Euy-Soo,Park Jin-Woo 한국공학교육학회 2005 공학교육연구 Vol.8 No.3
이 논문에서는 산업체 근무자에 대한 설문조사를 통해 우리나라 공학교육의 문제점을 파악하고자 하였다. 이를 위해 토목공학 분야에 대해서는 공학교육인증원에서 요구하는 학습성과를 기준으로 설문지를 작성한 후 직접 설문조사를 실시하고 그 내용을 분석하였으며, 화학공학 및 전자공학 분야에 대해서는 문헌조사를 통해 확보한 최근의 조사 결과를 이용하여 분석하였다. 설문조사 결과 3개 분야 모두 산업체 요구수준에 비해 대학졸업생의 수준이 절반에도 못 미치는 것으로 나타나 공학교육의 개선이 시급한 것으로 분석되었다. In this study, several issues of engineering education of Korea were pointed out through the survey for industrial employees in the areas of civil, chemical and electronics engineering. For the area of civil engineering, a questionnaire based upon the outcomes of ABEEK(accreditation board for engineering education of Korea) was developed for the survey, and the replies from the survey were then analyzed. For the areas of chemical and electronics engineering, data obtained from the literature study were used for analyses. The results of analyses show that the level of engineering education is much lower than that of the industrial demand in the case of all three divisions. It shows the urgency in improvement of engineering education.
김복기,문일,이의수,Kim Bok-Ki,Moon Il,Lee Euy-Soo 한국공학교육학회 2005 공학교육연구 Vol.8 No.4
사회는 매우 빨리 변화하고 있으나 변화의 핵심 인력과 기술을 제공해야하는 이공계대학의 교육과정은 이러한 변화의 속도를 따라가지 못하고 있다. 사회에서는 한 명이 수만 명을 먹여 살릴 수 있는 소위 gold color engineer 를 요구하고 있으나 대학의 반응은 아직까지 미진하다. 따라서 이런 사회의 빠른 변화에 대응하여 이공계교육이 적절히 변화할 수 있는 교육시스템의 구축이 매우 필요하다. 본 논문에서는 이를 위하여 이공계 대학교육과정의 문제점을 분석하고 그 개선방안을 논하고자 한다. 이공계 교육 내용에 대한 공급자와 수요자의 차이를 분석하고 이를 제고하기 위하여 새로운 교육체계를 제시하였다. 직업기초능력에 대한 설문을 실시하였고 국내외 이공계 교육 현황과 최근 국내 이공계 신입생의 과목이수 내용 등을 조사하였다. 또한 교육과정 개선을 위한 국가의 지원 방안을 제시하였다. The speed of the reformation of the Korean engineering and science education systems is very slow compared with the fast change of the society. Current society requires colleges to raise high quality gold color engineers, who can feed tens of thousands people, however current education system cannot fulfill the requirement. So we need a novel education system to adapt the fast change of the society. In this study, we analyzed the difference of the education quality between supplies and demands, and based on the analysis, we suggested a new continuous quality improving system. We also collected current data on the student capability of Korean engineering freshmen and surveyed on the required vocational basic skills. Finally we suggested some programs with that the government could support improving the quality of engineering and science college students.