http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이을재,박선순,김영석(Eul-Jae Lee),Sun-Soon Park,Young-Seok Kim 전력전자학회 1996 전력전자학술대회 논문집 Vol.1996 No.-
The carborne Automatic Train Control(ATC) system keeps automatically optimum tram speed against over speed by detecting the speed code signals from wayside(track) circuit equipment If there is no response for braking against the over speed detected, the driver will be noticed Instantly by visual and audible warning signals And then the ATC processes into braking mode for safe train operations to prevent any hazards by over speed limit In this paper we are introduced the novel ATC system which has triple constructed structure made by 32 bit floating point DSP(ADSP21020-20) and process dealed with frequency domain and time domain for detecting signals Owing to these reason It IS no needed several band pass filters used In conventional ATC systems to detect the speed limit frequency Also system's reliability and tolerance are Incremented by adopt to 2 out of 3 logic to the outputs decision.
초음파 모터 구동을 위한 단순화된 디지털 주파수/위상차/전압 제어기
이을재,김영석 전력전자학회 1999 전력전자학회 논문지 Vol.4 No.3
In this paper, the novel digital frequency/phase controller, to control the invelter fed traveling wave type ultra-sonic m motor(USM) is proposed. This controller is used to control the drive frequency, phase difference and applied voltages of e each phase of the motor. Proposed digital controller has constructed with digital logic only, no more use digitallongleftarrowanalog h hybrid method of the conventional controller, in order to generate drive frequency and phase difference. Therefore, the c control system has become to velY simple structure. T\rvo types of controllers are designed, one is to control drive f frequency and phase difference, another has added voltage control function of each phase. Two full digital voltage/phase c controllers are implemented by using custom LSI and EPLD, the control pelformance and the simplicity ofthe proposed c controller is verified by expeJimental results. 본 논문에서는 인버터를 사용하여 진행파형 초음파 모터를 구동할 때에 구동 주파수, 위상차 및 상간의 전압을 제어하기 위해 새로운 방식의 초음파 모터 구동용 디지털 제어기를 제안하였다. 제안된 디지털 제어기는 주파수 발생과 위상차 제어를 하기 위하여 기존의 제어기에서 사용한 디지털-아날로그 혼합 방식이 아닌 디지털 논리에 의하여 출력이 발생되며 이로 인하여 제어기의 구성이 대폭 단순해진 특징을 갖는다. 제안된 디지털 제어기는 두 가지 형태로 주파수와 위상만을 제어하기 위한 경우와 상간의 전압까지 제어하기 위한 경우로 분리하였다. 실험에서는 상용 LSI와 EPLD를 사용하여 구현된 단순화된 디지털 제어기의 성능을 평가하였다.
직렬 공진형 인버터를 사용한 초음파 모터 구동시스템의 공진 인덕턴스 선정법
이을재,김영석 전력전자학회 2000 전력전자학회 논문지 Vol.5 No.2
본 논문에서는 진행파형 초음파 모터 구동을 위한 직렬형 모터측에 직렬로 삽입되는 인덕터의 설계를 위한 새로운 해석 방법을 제시하였다. 초음파 모터의 구조를 등가적으로 해석하였고 이를 토대로 직렬 인덕터의 선정법을 제시하였다. 직렬 인덕터가 최적으로 설계되었을 때 모터 내부의 기계측 고유 공진 요소에 효율적인 전력이 전달될 수 있음을 시뮬레이션을 통하여 확인하였다. 여러 단계의 외부 인덕터에 대한 실험을 통하여 초음파 모터의 주파수 및 속도 특성이 검토되었다. 그 결과 제안된 외부 인덕터 선정방법의 타당성이 입증되었다. To chive a traveling wave type ultrasonic motor with the series""-resonant inverter, the external inductor is i lnserted between the motor and inverter. In $\psi$is paper, we proposed a novel 3Ilalysis method to design the 3 ~xternal inductor. An equivalent model of the ultrasonic motor is expressed, and a selection method of the , ;;eries inductor is proposed from the basis of the model. When the series inductor has an optimal value, it is v velified by computer simulation results that power is efficiently transmitted to the mechanical resonant c component in the motor. The frequency and speed characteristics of the ultrasonic motor are investigated by e experiments for several external inductors. The validity of the proposed method for selecting external inductor i is clarified.clarified.