http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
관계형 DBMS 사용 환경을 위한 SQL - SDE의 구현
이준호(Joonho Lee),안태호(Taeho Ahn),이윤숙(Yoonsuk Lee),이윤준(Yoonjoon Lee) 한국정보과학회 1988 한국정보과학회 학술발표논문집 Vol.15 No.2
사용자가 단말기에서 대화식으로 질의를 작성하여 데이타베이스에 접근하려면 DBMS가 제공하는 질의어의 구문에 알맞도록 질의를 작성해야 한다. 일반적으로 질의어는 많은 수의 예약어를 포함하는 복잡한 구조의 국문도 제공하기 때문에 일반 사용자들이 질의어를 술달하기에는 오랜 시간이 필요하다. 본 논문에서는 사용자가 SQL 언어로 질의를 작성할 때, 문법적 오류가 없는 질의를 쉽게 작성할 수 있도록, DBMS 사용 환경에 적합한 SQL syntax directed 에디터를 구현하였다. 이 시스템은 사용자가 DBMS가 제공하는 SQL 언어의 구문에 구애받지 않고, 문법적 오류가 없는 질의를 쉽게 작성할 수 있도록 도와준다.
[분산 데이타베이스] Hadoop 분산 파일 시스템의 효과적인 저장 공간 절약 기법
안후영(HooYoung Ahn),이경하(KyongHa Lee),이수호(SooHo Lee),이윤준(YoonJoon Lee),이상민(SangMin Lee),김영균(YoungKyun Kim) 한국정보과학회 2013 정보과학회 컴퓨팅의 실제 논문지 Vol.19 No.3
분산 파일시스템은 서로 분산된 여러 서버들을 가지고 파일 시스템을 구성함으로써 높은 확장성과 고가용성을 지원한다. 현재의 분산 파일시스템들은 내고장성을 위해 주로 데이터 복제 기법에 의존한다. 그러나 이 방법은 저장 공간을 추가로 필요로 하는 단점을 가진다. 이 논문에서는 이 추가 저장 공간의 문제점을 해결하고자 erasure coding을 이용한 패리티 블록의 작성을 통해 데이터 복제본을 대체함으로써 동일 수준의 내고장성을 유지하면서도 저장 공간을 보다 절약하는 방법을 제안한다. 특히, 동일 노드 상의 서로 다른 파일의 블록들을 하나의 스트라이프로 구성하여 패리티 블록을 생성함으로써 인코딩, 디코딩 시의 I/O 효율을 향상한다. 또한, erasure coding 적용 이후에도 신뢰성이 유지되는 블록 배치 기법을 제안하고 구현하였다. Conventional distributed file systems support high scalability and availability with many machines. Most of the distributed file systems mainly rely on data replication for providing fault-tolerance. However, the replication scheme also increases the storage overhead of the file system. To address the issue, we provide a novel method which substitutes the replica blocks with parity blocks by using erasure coding techniques. Especially, by making a stripe with the blocks which come across different files but are stored in a single node, we reduce I/O cost for encoding and decoding blocks significantly. Furthermore, we also propose and implement a novel block placement policy that supports high reliability as much as when using data replication scheme.
Urea-SCR 시스템에 적용되는 이유체 노즐의 공기공급량 변화가 분무특성 및 NOx 저감에 미치는 영향
최윤준(Yoonjoon Choi),우재문(Jaemoon Woo),김덕진(Deokjin Kim),이지근(Jeekeun Lee) 한국자동차공학회 2009 한국자동차공학회 학술대회 및 전시회 Vol.2009 No.11
In the case of heavy duty diesel engines, the Urea-SCR system is currently considered to reduce the NOx emission as a proved technology, and it has been widely studied to get the high performance and durability. In this study, the twin-fluid swirl type nozzle with a dual air(carrier air and assist air) supplying system was used to inject urea water solution. The air to liquid ratio was varied with 1.35, 1.80, 2.25, 2.70 at the fixed liquid flowrate. The carrier air mass flowrate and the quantity of injected urea water solution which is calculated from the NOx production model was fixed. The spray characteristics with the ALR were investigated experimentally thought a PDA system. As the results, the spray characteristics with increasing in ALR show the increased spray of the radial velocity, the more homogeneous volume flux and the SMD distribution with the radial distance. As ALR was increased, the NOx reduction rate is increased and the distribution of the injected urea solution upstream of SCR catalyst is relatively homogenized.
Urea SCR 환원제 분사용 이중공기 공급 이유체 노즐의 선회각 변화에 따른 NOx 저감 효과
최윤준(Yoonjoon Choi),우재문(Jaemoon Woo),김덕진(Deokjin Kim),이지근(Jeekeun Lee) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.11
In the case of heavy duty diesel engines, the Urea-SCR system is currently considered to reduce the NOx emission as a proved technology, and it has been widely studied to get the high performance and durability. In this study, the twin-fluid swirl type nozzle with a dual air supplying system was used to inject urea water solution. The NOx reduction ratio with the swirl angles of the nozzle was investigated experimentally. The swirl angle was varied with 0°, 45° and 90°, and the quantity of injected urea water solution which is calculated from the NOx production model was fixed. Urea solution is injected into the center of an exhaust pipe, and the spray direction is paralleled to the exhaust gas stream under the steady state condition in engine operation. The inlet temperature of the SCR catalyst is 350℃. As the results, the NOx reduction ratio with increasing in swirl angle of the twin-fluid nozzle is increased. As the swirl angle is increased, the distribution of the injected urea water solution upstream of SCR catalyst is relatively homogenized.
프린팅 디바이스 집단에서 사용자 정보를 P2P 기반으로 효율적으로 관리하는 방안에 대한 연구
권용찬(Yongchan Kwon),이윤준(Yoonjoon Lee) 한국정보과학회 2012 한국정보과학회 학술발표논문집 Vol.39 No.1A
프린터 비즈니스 사업자가 고객의 프린팅 디바이스를 대행 관리하는 형태의 비즈니스인 MPS (Managed Printing Service)는 최근 프린팅 산업의 대표적인 B2B향 비즈니스이다. MPS 서비스 사업자는 대규모 고객 환경의 프린팅 디바이스에 대한 통합 관리(장애 관리, 소모품 관리, 사용량 관리 등)를 제공하며, 이를 통하여 고객사는 프린터 장비에 대한 구매 및 관리의 부담을 없애고 사용량에 기반한 과금액을 MPS 사업자에게 지불하는 형태의 비즈니스가 이루어진다. MPS 서비스에서의 정확한 사용량 취합은 가장 핵심 기능에 해당되며, 또한 이와 함께 사용자 별 허용된 사용(출력) 제한량 쿼터를 설정함으로써 전체 프린팅 코스트를 절감하기 위한 기능 및 사용자 별 사용량을 취합하여 과금하는 기능의 정확도 향상은 MPS 비즈니스의 매우 중요한 고객 요구사항이다. 이에 본 프로젝트는 P2P 기반의 네트워크 구성을 통하여 기존에 구현되어 있는 프린터 사용자 쿼터 제한 기능을 개선할 수 있는 방법을 제안하고자 한다.
조민호(Minho Cho),강신명(Sinmyoung Kang),최윤준(Yoonjoon Choi),이지근(Jeekeun Lee),노병준(Byungjoon Rho) 한국자동차공학회 2007 한국자동차공학회 지부 학술대회 논문집 Vol.- No.-
The urea-selective catalytic reduction(SCR) system to reduce NOx emission needs the precise flowrate control to prevent ammonia slip, and the urea-water solution in the system is generally injected into the exhaust gas by the two-fluid nozzle with the adaptor that allows the carrier air supply. In this paper, the effects of carrier air supplying parameters on the variation of liquid flowrate in two-fluid nozzle were investigated by using the five times magnified nozzle adaptor model. The carrier air supplying positions and liquid-air supplying conditions were considered as the experimental parameters. The internal pressure of the adaptor and the flowrate issuing from the injection nozzle were measured at the liquid supplying pressure from 2 to 4 bar and carrier air supplying pressure from 1 to 3 bar. As the results from the experiment, the internal pressure of the adaptor and the flowrate issuing from the injection nozzle were varied with the carrier air supplying position and the differential pressure between the liquid-carrier air pressures.