http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이승수,박원란,정성석,Lee, Seung Soo,Park, Won Ran,Chung, Sung Suk 한국데이터정보과학회 2017 한국데이터정보과학회지 Vol.28 No.2
조사를 통한 자료생성은 시간과 경제적인 제약이 많고, 조사 방법 및 특성에 따라 자료의 질이 결정되며, 수집된 조사정보를 통계정보로 활용하기까지 오랜 시간이 소요된다. 이와 같은 어려움을 줄이고자 조사 표본설계 단위 보다 작은 지역 또는 다른 영역에 대한 자료를 기존에 조사된 자료 및 행정자료를 이용하여 추정하는 소지역추정 통계방법 활용 연구는 꾸준히 진행되고 있다. 따라서 본 논문에서는 소지역추정기법을 이용하여 인간이 기본적인 삶을 영위하는데 반드시 필요한 필수재이며, 동시에 우리나라에서 투자재로서의 특징을 나타내는 주택과 관련하여, 요즈음 새로운 주거형태를 차지하는 전세와 월세 지수에 모형기반 소지역추정기법을 적용하고자 한다. 적용된 소지역추정 모형은 회귀모형 추정법, 계층적 베이지안 추정법, 시-공간적 추정법이며, 분석결과 전세와 월세에서 시-공간적 추정모형이 가장 효율적인 것으로 나타났다. In this study we compared three models for small area estimation, Fay-Herriot, Hierarchical Bayses model and spatio-temporal model about charter, monthly rent price index. Charter, monthly rent price of Korea are important issue in these days. Because housing type rapidly changes from self to charter and monthly rent. The accuracy of the estimation was checked on four scales, that is ARB, ASRB, AAB, ASD. In this result, the spatio-temporal model among applied models has most optimal scales about small area estimation of charter and monthly rent index.
위암 수술 후 장기생존자에서 위 절제 범위에 따른 삶의 질
이승수,한성원,정혜연,송재원,정호영,유완식,Lee, Seung-Soo,Han, Sung-Won,Jeong, Hye-Yeon,Song, Jye-Won,Chung, Ho-Young,Yu, Wan-Sik 대한위암학회 2010 대한위암학회지 Vol.10 No.1
목적: 위암 환자에 있어서 근치적 위절제술 후, 위 절제 범위에 따라 삶의 질의 차이가 있다고 한다. 본 연구에서는 수술 후 장시간 경과 후 절제 범위에 따른 삶의 질의 차이를 확인했다. 대상 및 방법: 위암으로 근치적 위절제술을 받은 환자 중, 수술 후 5년이 지나 정기검진을 위해 외래를 방문한 166명을 대상으로 하여, EORTC QLQ-C30 3판과 EORTC QLQSTO22의 한국어판을 이용하여 삶의 질을 평가하였다. 결과: EORTC QLQ-C30으로 수술 후 5년에 평가한 삶의 질은, 육체적, 역할, 정서적, 인지, 사회적 기능 척도 및 피로감, 통증, 호흡곤란, 설사, 경제적 부담감의 척도에서 위아전절제술을 받은 후에 나은 삶의 질을 보이는 경향이 있었으나 통계학적으로 유의한 수준은 아니었다. 전체적인 건강 및 삶의 질, 오심과 구토, 수면장애, 식욕감퇴, 변비의 척도에서는 위전절제술을 받은 후에 더 나은 삶의 질을 보이는 경향이 있었으나 통계학적으로 유의한 수준은 아니었다. EORTC QLQ-STO22로 수술 후 5년에 평가한 삶의 질은, 모든 척도에서 위아전절제술을 받은 후에 더 나은삶의 질을 보이는 경향이 있었으나 통계학적으로 유의한 수준은 아니었다. 결론: 수술 후 단기적인 삶의 질의 차이는 있지만, 위암 완치 후에도 장기적으로 지속되는 삶의 질의 악화를 염려하여, 근치적 위절제술의 절제 범위를 축소할 필요는 없겠으며, 종양학적 원칙에 입각한 수술이 필요하겠다. Purpose: The aim of this study was to compare quality of life of long-term survivors after a subtotal or a total gastrectomy for gastric cancer. Materials and Methods: The European Organization for Research and Treatment of Cancer (EORTC) QLQ-C30 questionnaire and QLQ-STO22 questionnaire were used to assess quality of life of 166 patients on their 5th annual follow-ups after gastrectomy for gastric cancer. One hundred twenty-six patients underwent a subtotal gastrectomy and 40 patients a total gastrectomy. Results: The subtotal gastrectomy group revealed a trend to have better quality of life in functional scales (physical, role, emotional, cognitive and social), fatigue, pain, dyspnea, diarrhea and financial difficulties. The total gastrectomy group showed a trend to have better quality of life in the global health status and quality of life, nausea and vomiting, insomnia, appetite loss and constipation. In all scales of the EORTC QLQ-STO22, the subtotal gastrectomy group had a trend to have better quality of life. However these did not reach the statistical significance. Conclusion: Surgeons may not limit the extent of resection concerning long-lasting poor quality of life. Oncologically sound resection is recommended.
이승수(Sung Soo Lee),용환선(Hwan Sun Yong),김석태(Seok Tae Kim),박재일(Jae Yil Park) 한국강구조학회 1996 韓國鋼構造學會誌 Vol.8 No.2
The purpose of this paper is to provide a reasonable and economic method of the remaining life prediction for steel railroad short span bridge through compare the actual stress time history with simulated that. In this procedure the identified frequency distribution of stress range of the steel railroad bridge varies with the rational values of cutoff point and bar width. Thus, we show variable aspect of the equivalent stress range results from change cutoff point and bar width. And we analyze the variable of RMC and RMS model due to cut off point and bar width of the measured stress history influenced the prediction of fatigue life in the steel railroad bridge. The simulated stress time history is carried out by the superposition method incorporating the vertical load with rotation moment obtained from the Hemition interpolation function, and compared with developing stress results from measured maximum stress.
열가소성 폐플라스틱 연소 보일러용 펠렛 연료의 용융특성 실험
이승수(Sung-Soo Lee),김혁주(Hyouck-Ju Kim),최규성(Gyu-Sung Choi) 한국연소학회 2006 KOSCOSYMPOSIUM논문집 Vol.- No.-
Experiments were performed to investigate the melting characteristics of pellet fuel made of LDPE and PP for a waste plastic firing boiler. Pellet fuel in a burner goes through conduction, convection and radiation transferred from flame in a furnace, and complex thermo/chemical processes. To figure out effects of ambient temperature and size of pellet on melting time pellets with a diameter from 5 ㎜ to 40 ㎜ were made to contact high temperature flue gas generated by a LNG firing pilot burner. Though melting processes of plastics include complicated heat transfer in a burner, parameters are limited to flue gas temperature and size for the simplicity in this study. From the results, melting times of LDPE and PP with a diameter of 5㎜ are 63 and 62 sees respectively at 600 ℃ while 677 and 583 sees respectively for a diameter of 40 ㎜. At 900℃, melting times of LDPE and PP with a diameter of 5㎜ are 21 and 24 sees respectively while 408 and 337 sees respectively for a diameter of 40 ㎜. It is found that melting time of LDPE is longer than that of PP, and melting times of both in general increase with diameter of pellets. It is thought melting is dependent mostly on melting temperature of plastic. It is expected melting times obtained from the study might be taken into account in designing a pellet firing burner for a boiler
이승수(Sung-Soo Lee),김민주(Min-Ju Kim),김태호(Tae-Ho Kim),김성욱(Seung-Wook Kim),박정보(Jeung-Bo Park),전언찬(Eon-Chan Jeon) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
This study is described about development method and application of developed automatic design<br/> program. Automatic design program is the object-oriented program which based on mathematical<br/> algorithm. Automatic design program can do mathematic operation according to program contents. Also<br/> it can do modeling of shape. Shape modeling method is based on mathematical and geometrical<br/> algorithm. And created models can generate NC manufacturing program from CAM software. Also STL<br/> file format that is changed form created models can do RP manufacturing.