http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이영(Young Lee),문성암(Seong-Am Moon),석순복(Sun-Bok Seok) 한국SCM학회 2013 한국SCM학회지 Vol.13 No.1
Supply chains are facing numerous changes that are contributing to increasing vulnerability to disturbances. Therefore, supply chains must be resilient. The paper present a supply chain simulation study based on empirical data for a real case related with Army supply chains. The purpose of this paper is to evaluate alternative supply chain scenarios based on supply chain structure for improving supply chain resilience to a surge demand in war time. and assess how mitigation strategies affect end user as well as whole supply chain. Strategic inventory and redeployment is considered as redundancy and flexibility respectively. To assess the supply chain structure of each scenario, three performance measures are used, stockout rate at end user as customer fillrate, end user recovery pattern and total inventory level. We show that right reduncancy leads Army supply chains to be more resilient as well as efficient.
의사결정자의 평균고정 휴리스틱이 공급사슬에 미치는 영향에 관한 연구
문성암 ( Seong Am Moon ),석순복 ( Sun Bok Seok ),박재향,김이석 ( Sok Lee Kim ) 한국로지스틱스학회 2012 로지스틱스연구 Vol.20 No.1
본 연구는 개인의 휴리스틱이 공급사슬에 어떠한 영향을 미치는지 실험과 시뮬레이션을 통해 검증하였다. 우선 뉴스벤더 실험을 통해 개인의 주문량 의사결정시 어떠한 휴리스틱이 발생하는지 파악하였다. 그리고 파악된 휴리스틱을 시뮬레이션 모델에 반영하여 공급사슬에서의 영향 정도를 파악하였다. 연구 시작 전 다른 휴리스틱 유형, 예를 들면 수요추종이나 도박사의 오류 등도 가정하였으나 실험 데이터 분석 결과 피실험자 대부분이 수요 상황에 상관없이 평균에 고착되는 휴리스틱을 보였다. 이렇게 도출된 평균고정 휴리스틱이 다단계 공급사슬에 미치는 영향을 확인하기 위해 스터만(Sterman, 2000)의 맥주배송 게임 모델의 기본 인과구조를 그대로 활용하여 시뮬레이션을 모델링하였다. 기본모델과 평균고정 휴리스틱을 적용한 모델을 비교분석한 결과 평균고정 휴리스틱이 공급사슬에서 단계별 주문량 변동폭을 줄여 채찍효과(Bullwhip Effect)가 줄었으며, 일반수요에서는 매우 합리적인 모델로 확인되었다. 하지만 계절수요와 같이 주기별 수요평균의 변동이 큰 상황에서는 신속히 대응하지 못해 재고유지비용과 재고부족비용을 많이 초래하였다. 본 연구는 공급사슬 성과라는 거시적 변수와 개인의 의사결정이라는 비교적 미시적 변수를 동시에 적용하여 분석하였다는 점에서 기존 연구와 차별성을 보인다. The purposes of this thesis were to find out the effects of the decision maker`s mean anchoring heuristic on the supply chain. We had an newsvendor experiment to retrieve decision maker`s ordering patterns. We defined three types of ordering behavior depending on heuristic with formula and six demand types, and classified them. As a result, almost subjects used mean anchoring heuristic. We designed the basic and M type supply chain simulation using causal structure of Beer Distribution Game in Sterman(2000). Basic model is the same as the casual structure and M type model is applied the formula of mean anchoring heuristic. The simulation results are as follows : If unit stock keeping cost and unit stock-out cost are the same, M type model has cost 1375 times less than the basic model in normal distribution demand and basic model always shows the better performance in seasonal demand. We also found out that M type decision maker`s conservativeness probably make the bullwhip effect of the supply chain reduced. This study shows the difference from other studies in that we analyzed the effect of the individual factor on the supply chain using experiment and simulation consequently.
골프장의 잔디 토양에서 다양한 코팅 및 비코팅 칼륨(K) 비료의 이동성 평가
김홍기,한석순,권상문,김희정,우선희,이문순,백기태,이봉규,이상승,김인수,정근욱,Kim, Hong-Ki,Han, Seok-Soon,Kwon, Sang-Moon,Kim, Hee-Jung,Woo, Sun-Hee,Lee, Moon-Soon,Baek, Ki-Tae,Lee, Bong-Gyu,Lee, Sang-Sung,Kim, In-Su,Chung, Keun-Yook 한국잔디학회 2009 한국잔디학회지 Vol.23 No.1
일반적으로, 골프장의 퍼팅그린(putting green)지역에서 사용되는 토양은 매우 낮은 CEC(양이온치환용량)와 알루미늄 및 철 수산화물의 코팅이 없는 모래로 이루어진 근권 혼합물로 구성되었다. 이러한 성질로 인해서, 그린 토양에 의한 칼륨(K)의 보유는 극히 제한될 수 밖에 없다. 새로운 상업용 칼륨 비료는 골프장의 그린지역에서 적절한 칼륨의 유지에 도움을 줄 수 있다. 본 연구에서는 잔디 품종 'Floradwaf' bermudagrass(Cynodon docfyfon L. $P_{ERS}$.)을 유리 온실에서 재배하면서 상업용 칼륨 비료의 용출(leaching)과 영양분 공급 잠재력을 평가하였다. 전체 12주의 실험기간 동안 격주로 칼륨의 농도를 측정하기 위해 절취된 잔디와 용출액이 수집되었다. 깎여진 잔디는 48시간 동안 $70^{\circ}C$에서 건조되었고 건물중량 측정이 이루어졌다. $K_2SO_4$를 제외한, 사용된 칼륨 비료원들은 bermudagrass의 성장에 주목할 만한 차이를 보여 주지 못했다. 그러나 첫 번째 와 두 번째 용출액 수집 기간 동안에 칼륨의 용출은 큰 차이가 관찰되었다. 코팅이 되지 않은 0-20-20 액체 비료가 가장 많은 양의 칼륨을 용출시켰고, 두 번째로, MKP, 세 번째로 KCL, 네 번째로 $KNO_3$가 칼륨을 용출시켰다. 코팅이 된 칼륨 비료원들(CKCL, $CKNO_3$, $CK_2SO_4$)이 가장 적은 양의 칼륨을 용출시쳤다. 사용된 칼륨 비료원들에 관계없이 첫 번째 세 번의 용출 수집기간 동안에 칼륨의 80%가 용출되었다. 용출된 칼륨의 양 및 건조중량과 영양분 칼륨의 흡수와는 상관관계가 관찰 되지않았다. 칼륨의 회수율은 82%에서 104%까지 분포하였다. 그러므로, 사용된 코팅이 된 칼륨(K) 비료원들(CKCL, $CKNO_3$, $CK_2SO_4$)이 환경친화적인 칼륨(K) 비료원들로 사료되고 추천된다. This study was initiated to evaluate the K leaching potential in the green soils and K uptake by the turfgrass in the golf course using the K fertilizers. The turfgrass, Floradwarf bermudagrass(Cynodon dactylon L. $P_{ERS}$.) was planted and grown in the mixture of sand and peat moss in this lysimeter study. Eight representative K fertilizers, such as, monopotassium phosphate (MKP), KCL, $K_2SO_4$, $KNO_3$, CKCl, $CK_2SO_4$, $CKNO_3$, and 0-20-20(liquid) were used in this study. Based on the total K quantity of leachate collected during the whole 12 weeks, 0-20-20 is the K fertilizers the most contributing to the leaching of K, then MKP, the second, KCL, the third, and finally $KNO_3$ are K fertilizers contributing to the K leaching. However, most amount of K applied and collected in the lysimeter were leached during the first period of two and four weeks, compared to that of K leached during the second period of six, eight, ten, and twelve weeks. Application of CKCL and $CK_2SO_4$ producted the largest amount of total dry matter, then MKP and KCL, $KNO_3$ and $CKNO_3$, 0-20-20 in second group. However, except $K_2SO_4$, most K fertilizer sources such as MKP, KCL, $KNO_3$, CKCL, $CK_2SO_4$, $CKNO_3$, 0-20-20 showed the largest amount of K uptake, except $K_2SO_4$. Therefore, based on the K leaching, dry matter production, and plant K uptake, it appears that the coated fertilizers, CKCL, $CKNO_3$, and $CK_2SO_4$ are the environmentally sound fertilizers recommended in the turfgrass green soil of golf course.
최헌오,이석순,Choe, Heon-O,Lee, Seok-Sun 한국기계연구원 1990 기계연구원소보 Vol.20 No.-
An algorithm is presented for 3-dimensional contour lines with a hidden line removal ~technique developed by T.L. Janssen(l). Contour line algorithm on any 3-dimensional plane cutting solid body is also shown. NUFIG(2) algorithm is adopted for searching contour lines. Test problems show well-established contour lines on the surface and also on the cutting plane of the structure.