강원도 일부 농촌지역 노인의 사회경제적 위치와 구강건강관련 삶의 질과의 연관성

이민선,신선정,정세환,Lee, Min-Sun,Shin, Sun-Jung,Jung, Se-Hwan 한국치위생학회 2011 한국치위생학회지 Vol.10 No.2

Objectives : The objective of this study was to assess a level of oral health related quality of life(OHRQoL) for rural communities elderly and to determine the association between OHRQoL and socio-economic position. Methods : The study population was elderly(60+year-old) residents of PyeongChang county, Jeongseon county, Yeongwol county, Gangwon province. A total of 171 people were invited to participate. Oral health related quality of life was measured using the GOHAI. The data were analyzed with Mann-Whitney U test or Kruskal-Wallis test and to assess socio-economic inequalities in OHRQoL(GOHAI), we used multi-variable logistic regression models. We used models adjusting for age, sex, family status factors(Model I) and compared them to models additionally adjusting for stress level(Model II). Results : There were significant differences in lower score of GOHAI at lower age group and live alone group. And we found that lower SES was significantly associated with lower score of OHRQoL. Social gradient in the score of OHRQoL persisted when adjusted for age, sex, family status, stress level. Conclusions : We recommend that oral health promotion program should be developed after due consideration SES for rural communities elderly because OHRQoL of rural communities elderly was low and association between SES and OHRQoL for rural communities elderly.

Hard PZT IDE 유니몰프 캔틸레버의 압전 에너지 하베스팅 특성

이민선,김창일,윤지선,박운익,홍연우,조정호,백종후,박용호,장용호,최범진,정영훈,Lee, Min-seon,Kim, Chang-il,Yun, Ji-sun,Park, Woon-ik,Hong, Youn-woo,Cho, Jeong-ho,Paik, Jong-hoo,Park, Yong-ho,Jang, Yong-ho,Choi, Beom-jin,Jeong, Young-hu 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.8

A unimorph piezoelectric cantilever generator with an interdigitated electrode (IDE) was developed for vibration energy harvester applications driven in the longitudinal mode. Hard lead zirconate titanate (PZT) ceramic with a high $Q_m$ of 1,280 was used as the piezoelectric active material. Ten PZT sheets produced by tape casting were laminated and co-fired with an Ag/Pd IDE at $1,050^{\circ}C$ for 2 h. The approximately $280{\mu}m$-thick co-fired PZT laminate with the IDE was attached to a stainless steel substrate with an adhesive epoxy for the fabrication of an IDE unimorph cantilever. Its energy harvesting characteristics were evaluated: an output power of $1.1{\mu}W$ at 120 Hz across the resistive load of $700k{\Omega}$ was obtained, corresponding to a normalized power factor of $4.1{\mu}W/(G^2{\cdot}cm^3)$.

그리드 네트워킹 전문가 좌담회-글로리아드 개통의 의의와 발전방향 진단

이민선,Lee, Min-Seon 한국과학기술정보연구원 2005 지식정보인프라 Vol.20 No.-

본격적인 국제 사이버 과학기술 R&D 시대를 열어 줄 국제과학기술협업연구망 글로리아드(GLORIAD) 개통을 기념해, 우리 연구원은 지난 9월 5일부터 6일까지 이틀 간 서울롯데호텔(소공동 소재)에서 세계적인 과학기술계 석학들과 함께 '글로벌 첨단 과학기술협업연구망의 발전방안 모색'이라는 주제로 국제 심포지움을 개최했다. 그 첫날인 9월 5일 우리 연구원은 전자신문사와 공동으로 글로리아드 개통의 의의와 앞으로의 발전방향을 진단해 보는 좌담회를 열었다. 좌담회는 우리 연구원 이지수 슈퍼컴퓨팅센터장의 사회로, 미국 글로리아드 사업책임자인 오크릿지 국립연구소(UT-ORNL) 그렉 콜(Greg Cole) 박사, KAIST 전자전산학과 전길남 교수, 세계 핵융합에너지(ITER) 연구의 최고 권위자인 러시아 쿠르차토프연구소(RRC" Kurchatov Institute) 벨리코프(Evegany Velikhov) 소장, 중국 글로리아드 사업 책임자인 중국 전산망정보센터 얀 바오핑(Baopin Yan)센터장, 세계적인 네트워킹 기업 VSNL의 디렉터 빅토르 헤다드(Victor Haddard)가 참가했다.

SNS 외모 관련 사진활동이 여성의 사회·심리적 외모 관련 태도, 신체만족도 및 자아존중감에 미치는 영향

이민선,이현화,Lee, Minsun,Lee, Hyun-Hwa 한국의류학회 2017 한국의류학회지 Vol.41 No.5

The present study purported to understand the relationships between SNS appearance-related photo activity, body image and self-esteem among young women. Objectification Theory and Social Comparison Theory explain the process how young women's SNS appearance-related photo activity influence their body satisfaction through a perceived media pressure, objectification of their own bodies and appearance comparison. These process ultimately affect the self-esteem of young female users. A research model was proposed and related hypothesis were examined. We collected an online questionnaire from 400 female participants in their 20's. Data were analyzed using SPSS 23.0 and AMOS 18.0. Structural equation modeling analyses suggested that the proposed research model provided a good fit to the data and supported most hypothesis. The results indicated that the level of SNS appearance-related photo activity significantly influences young female user's body satisfaction and self-esteem. The findings of this study were consistent with previous literature on media and body image. Limitations and future research suggestions were also described.

스피커 응용을 위한 적층형 압전 세라믹 액츄에이터 제조 및 특성

이민선,윤지선,박운익,홍연우,백종후,조정호,박용호,정영훈,Lee, Min-seon,Yun, Ji-sun,Park, Woon Ik,Hong, Youn-Woo,Paik, Jong Hoo,Cho, Jeong Ho,Park, Yong-Ho,Jeong, Young-Hun 한국전기전자재료학회 2016 전기전자재료학회논문지 Vol.29 No.10

Piezoelectric thick films of soft $Pb(Zr,Ti)O_3$ (PZT) based commercial material (S55) were fabricated using a conventional tape casting method. Ag-Pd electrodes were printed on the piezoelectric film at room temperature and all 5 layered films with a dimension of $12mm{\times}16mm$ were successfully laminated for a multi-layered piezoelectric ceramic actuator. The laminated specimens were co-fired at $1,100^{\circ}C$ for 1 h. A flat layered and dense microstructure was obtained for the $112{\mu}m$ thick piezoelectric actuator after sintering process. Thereafter, a prototype piezoelectric speaker was fabricated using the multi-layered piezoelectric ceramic actuator which can operate as a bimorph. Its SPL (sound pressure level) characteristic was also evaluated for speaker application. Frequency response revealed that the output SPL with a root mean square voltage of 10 V increased gradually to the highest peak of 87.5 dB for 1.5 kHz and exhibited a relatively stable behavior over the measured frequency range (${\leq}20kHz$) at a distance of 10 cm, implying that the fabricated piezoelectric speaker is potential for speaker applications.

PZT계 압전 세라믹 파이버 어레이 복합체를 이용한 미소 풍력 에너지 하베스터

이민선,나용현,박진우,정영훈,Lee, Min-Seon,Na, Yong-Hyeon,Park, Jin-Woo,Jeong, Young-Hun 한국전기전자재료학회 2019 전기전자재료학회논문지 Vol.32 No.5

A piezoelectric ceramic fiber composite (PCFC) was successfully fabricated using $0.69Pb(Zr_{0.47}Ti_{0.53})O_3-0.31[Pb(Zn_{0.4}Ni_{0.6})_{1/3}Nb_{2/3}]O_3$ (PZT-PZNN) for use in small-scale wind energy harvesters. The PCFC was formed using an epoxy matrix material and an array of Ag/Pd-coated PZT-PZNN piezo-ceramic fibers sandwiched by Cu interdigitated electrode patterned polyethylene terephthalate film. The energy harvesting performance was evaluated in a custom-made wind tunnel while varying the wind speed and resistive load with two types of flutter wind energy harvesters. One had a five-PCFC array vertically clamped with a supporting acrylic rod while the other used the same structure but with a five-PCFC cantilever array. Stainless steel (thickness: $50{\mu}m$) was attached onto one side of the PCFC to form the PZT-PZNN cantilever. The output power, in general, increased with an increase in the wind speed from 2 m/s to 10 m/s for both energy harvesters. The highest output power of $15.1{\mu}W$ at $14k{\Omega}$ was obtained at a wind speed of 10 m/s for the flutter wind energy harvester with the PZT-PZNN cantilever array. The results presented here reveal the strong potential for wind energy harvester applications to supply sustainable power to various IoT micro-devices.

3-3 진동 모드 압전 캔틸레버 에너지 하베스터의 제조 및 전기적 특성

이민선,김창일,윤지선,박운익,홍연우,백종후,조정호,박용호,장용호,최범진,정영훈,Lee, Min-seon,Kim, Chang Il,Yun, Ji-sun,Park, Woon-ik,Hong, Youn-woo,Paik, Jong-hoo,Cho, Jeong-ho,Park, Yong-ho,Jang, Yong-ho,Choi, Beom-jin,Jeong, Young-hu 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.5

A piezoelectric cantilever energy harvester (PCEH) driven in longitudinal (3-3) vibration mode was fabricated, and its electrical properties were evaluated by varying the resistive load. A commercial PZT piezoelectric ceramic with a high piezoelectric charge constant ($d_{33}$) of 520 pC/N and the interdigitated (IDT) electrode pattern was used to fabricate the PCEH driven in longitudinal vibration. The IDT Ag electrode embedded piezoelectric laminates were co-fired at $850^{\circ}C$ for 2 h. The 3-3 mode PCEH was successfully fabricated by attaching the piezoelectric laminates to a SUS304 elastic substrate. The PCEH exhibited a high output power of 3.8 mW across the resistive load of $100k{\Omega}$ at 100 Hz and 1.5 G. This corresponds to a power density of $10.3mW/cm^3$ and a normalized global power factor of $4.56mW/g^2{\cdot}cm^3$. Given the other PCEH driven in transverse (3-1) vibration mode, the 3-3 mode PCEH could be better for vibration energy harvesting applications.

Lower Nutrient Intakes and Periodontitis: Findings from the Korea National Health and Nutrition Examination Surveys

이민선,한동헌,김미선,Lee, Min-Sun,Han, Dong-Hun,Kim, Mi-Sun The Korean Academy of Dental HygieneThe Korean Soc 2021 대한치위생과학회지 Vol.4 No.1

Background: Limited information is available regarding the associations of various nutrients and periodontitis in Korea. Furthermore, these associations have been controversial in previous studies. Therefore, the present study aimed to evaluate the associations between several nutrients and periodontitis. Methods: Pooled data from the 2007~2010 and 2012 Korea National Health and Nutrition Examination Surveys (KNHANES) were used for the present study. Periodontitis was defined using the World Health Organization (WHO) Community Periodontal Index. All participants completed the Food Frequency Questionnaire (FFQ), which was analyzed using CAN-Pro 4.0. Vitamins A, B₁, B₂, and C, iron, phosphorus, calcium, and protein were selected for analysis. Multiple logistic regression analyses were used to estimate the odds ratios (ORs) for periodontitis. Results: Lower intake of phosphorus (adjusted odds ratio [AOR] = 1.86), calcium (AOR = 1.25), and protein (AOR = 1.52) were associated with periodontitis in males, and lower intake of vitamins A (AOR = 1.32), B1 (AOR = 1.21), B2 (AOR = 1.24), and C (AOR = 1.21), iron (AOR = 1.25), phosphorus (AOR = 1.33), and protein (AOR = 1.27) showed significant relationships with periodontitis in females. In the sociodemographic, somatic, and health behavior-adjusted models, lower phosphorus (AOR = 2.68) and protein (AOR = 1.68) intake in younger males, and lower vitamin A intake (AOR = 1.37) in middle-aged females were significantly associated with periodontitis. Conclusions: The results of the present study demonstrated a significant association between periodontitis and nutrient intake. To avoid an insufficient nutrient supply for a patient with periodontal disease, the patient's diet should be closely monitored.

IDT 전극 패턴 임베디드 압전 에너지 하베스터의 특성

이민선,김창일,윤지선,박운익,홍연우,백종후,조정호,박용호,장용호,최범진,정영훈,Lee, Min-seon,Kim, Chang-Il,Yun, Ji-sun,Park, Woon Ik,Hong, Youn-Woo,Paik, Jong Hoo,Cho, Jeong Ho,Park, Yong-Ho,Jang, Yong-Ho,Choi, Beom-Jin,Jeong, Young-Hu 한국전기전자재료학회 2016 전기전자재료학회논문지 Vol.29 No.9

Piezoelectric thick films of a soft $Pb(Zr,Ti)O_3$ (PZT) based commercial material were produced by a conventional tape casting method. Thereafter, the interdigitated (IDT) Ag-Pd electrode pattern was printed on the $25{\mu}m$ thick piezoelectric film at room temperature. Co-firing of the 10-layer laminated piezoelectric thick films was conducted at $1,100^{\circ}C$ and $1,150^{\circ}C$ for 1 h, respectively. Piezoelectric cantilever energy harvesters were successfully fabricated using the IDT electrode pattern embedded piezoelectric laminates for 3-3 operation mode. Their energy harvesting characteristics were investigated with an excitation of 120 Hz and 1 g under various resistive loads (ranging from $10k{\Omega}$ to $200k{\Omega}$). A parabolic increase of voltage and a linear decrease of current were shown with an increase of resistive load for all the energy harvesters. In particular, a high output power of 3.64 mW at $100k{\Omega}$ was obtained from the energy harvester (sintered at $1,150^{\circ}C$).

온열요법과 기치유요법이 어깨근통증 압통역치에 미치는 영향

이석복 ( Lee Seok Bok ),이민선 ( Lee Min Sun ),이형환 ( Hyung H Lee1 ) 한국자연치유학회 2014 Journal of Naturopathy Vol.3 No.1

In this study, we wanted to understand the influence of thermotherapy, Qi-therapy, and their combination therapy on the oppressive muscular pains in shoulders. For the clinical study, 102 subjects were divided into 3 groups of thermotherapy, Qi-therapy, and the combination therapy to see the differences in the therapeutic effects. The treatments were taken 5 times for 2 weeks in 3-day intervals and pre- and post-treatment assessments were undertaken for the visual pain assessment (VAS, visual analogue scale) and experimental pressure threshold in 8 points in the relevant muscles (PPT). VAS score was decreased by 39% after thermotherapy, 66.5% after Qi-therapy, and 72.3% after combination therapy, all with significance (p<.05). The experimental pressure thresholds of shoulder muscles, the upper trapezius muscles, the lower trapezius muscles, the anterior trapezius muscles. the supraspinous muscles, the greater pectoral muscles, and the sternocleidomastoid muscles were increased by 4.3~11.3% after thermotherapy, 5.9~19.9% after Qi-therapy, and 9.3~25.4% after combination therapy. The experimental pressure thresholds in the 8 points in the relevant muscles did not show a significant difference between the Qi-therapy and combination therapy in the upper and lower trapezius muscles, however, did show a significant difference to the thermotherapy. In the shoulder muscles, anterior and posterior trapezius muscles, supraspinous muscles, supraspinous muscles, greater pectoral muscles, and sternocleidomastoid muscles, there were significant superiorities in Qi-therapy over thermo therapy, and in the combination therapy over Qi-therapy. In conclusion, it could be understood that both thermotherapy and Qi-therapy have been effective in the improvement of pains, and especially combination therapy showed better effectiveness. It is expected to apply these natural therapies to the pain treatment of human body to contribute to the improvement of health and welfare.