http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초음파 유도하에 자궁내막 소파술로 치료된 자궁내막 골화생
이동운 ( Lee Dong Un ),이해혁 ( Lee Hae Hyeog ),구도형 ( Gu Do Hyeong ),김태희 ( Kim Tae Hui ),심일구 ( Sim Il Gu ),이권해 ( Lee Gwon Hae ),남계현 ( Nam Gye Hyeon ),이임순 ( Lee Im Sun ),권계원 ( Kwon Gye Won ) 대한산부인과학회 2003 Obstetrics & Gynecology Science Vol.46 No.12
The endometrial osseous metaplasia is one of a rare conditions which gynecologist experience clinically. Clinical presentation may include irregular menstration, abnormal uterine bleeding, discharge, dysmenorrhea, pelvic pain, and secondary infertility. H
이동운(Lee, Dong-Un),박현정(Park, Hyun-Jung) 한국산학기술학회 2014 한국산학기술학회논문지 Vol.15 No.2
본 연구의 목적은 플라이 애시, 고로슬래그 미분말, 실리카흄을 사용하여 4성분계 콘크리트의 염해 저항성능 을 평가하기 위한 것이다. 본 연구에서는 압축강도, 탄성계수, 염수침지 시험, 염화물 확산계수 및 침투계수를 실시하 였다. 4성분계 콘크리트의 염화물 확산계수와 침투계수는 재령 17주에 0.032×10-12 m2/sec 와 650 coulomb으로 측정 되었다. 또한 침지시험 결과 염화물 이온 침투깊이와 염화물량은 3.7 mm and 10.211 kg/m3로 측정 되었다. 이러한 결과로부터 플라이 애시, 고로슬래그 미분말, 실리카흄을 사용하여 제조한 4성분계 콘크리트는 염해 저항성능과 역학 적특성이 매우 높을 것을 알 수 있었다. The purpose of this study is to estimate Chloride Attack Resistibility and mechanical properties of quaternary concrete adding fly ash, blast-furnace slag, and silica fume. Compressive strength, modulus of elasticity, chloride migration coefficient, charge passed from Rapid chloride penetration test(RCPT), and immersion testing in 3% NaCl are tested. Chloride migration coefficient and charge passed of quaternary concrete measured 0.032×10-12 m2/sec and 650 coulomb at 17 weeks, which are in a permitted limit. Also in immersion test, depth of chloride penetration and maximum chloride ion of quaternary concrete measured 3.7 mm and 10.211 kg/m3 respectively. From the results, quaternary concrete adding fly ash, blast-furnace slag, and silica fume denotes improvement of mechanical properties and chloride attack resistibility.
Fuzzy AHP기법을 이용한 건설공사의 코스트 리스크 분석에 관한 연구
이동운(Lee Dong-un),김영수(Kim Yeong-Su) 대한건축학회 2003 大韓建築學會論文集 : 構造系 Vol.19 No.4
This research suggests the Fuzzy AHP-cost risk analysis model(FA-CRAM) where pairwise comparisons are described by membership values, for overcoming the limitation of the existed quantitative risk analysis methods. The FA-CRAM is to handle vague linguistic presentation caused by expert's experiences and subjective judgement and to synthesize fuzzy set theory with decision-making system AHP method, which is able to enhance precision of construction projects cost risk analysis and estimating specially on where highly demanded expert's experiences and intuition.
혼화제를 사용한 공동주택 바닥마감 모르타르의 균열저감에 관한 연구
이동운(Lee, Dong-Un) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.2
본 연구에서는 공동주택 바닥미장 모르타르의 균열을 저감하기 위하여 균열 방지제, 고성능 감수제, 수지 등의 재료 혼입에 따른 균열촉진실험을 실시하였다. 그 결과 고성능 감수제와 수지를 혼입한 시편이 균열방지제를 사용한 시편보다 균열수와 압축강도에서 더 우수한 결과를 나타내었다. 그리고 가장 높은 압축강도를 나타낸 시편이 상대적으로 매우 적은 균열을 나타냈으며, 가장 낮은 압축강도를 나타낸 시편에서 많은 균열을 관찰할 수 있었다. 그러므로 압축강도가 우수한 시편 이 균열 저항성도 우수한 것으로 나타나 압축강도와 균열저항성은 비례하는 것으로 측정되었다. 모의부재 실험을 바탕으로 실제 아파트 현장에 적용된 배합 3의 장기 모니터링 결과, 장기 재령에서 균열발생이 전혀 관찰되지 않았다 In this study, strengthening methods of floor surface finishing mortar are investigated to prevent the cracks using crack inhibitor agents, water reducer agent and resin. As a results, The number of crack and compressive strength of the specimen containing water reducer agent or resin had more effective than other specimens containing inhibitor agents at 7 days. And the highest compressive strength specimen showed the relatively no crack, but the lowest compressive strength specimen showed a lot of crack. Therefore the relationship between the crack growth and the compressive strength had proportional connection. A base on the mock-up test, long-term monitoring of the on-site applied to mixing design type3 showed the few cracks
동제련 슬래그를 혼입한 고강도 콘크리트의 유동특성에 관한 연구
이동운(Dong-Un Lee),윤종진(Jong-Jin Yoon),김대영(Dae-Young Kim) 한국산학기술학회 2016 한국산학기술학회논문지 Vol.17 No.10
본 연구의 목적은 고강도 콘크리트에 광물성 혼화재로서 동제련 슬래그를 혼입하였을 때 유동특성을 파악하기 위한 것이다. 이를 위해 동제련 슬래그를 고강도 콘크리트의 결합재로 사용하여 10 %, 20 %, 30 %, 40 %, 50 %를 시멘트로 대체하여 사용하였다. 그리고 굳지않은 콘크리트에서 슬럼프플로, 500mm도달시간, V-Funnel과 U-Boxt시험을 실시하여 유동성 및 충전성을 알아보았고, 굳은 콘크리트에서는 재령 3, 7, 14, 28일의 콘크리트 압축강도를 측정하였다. 상기의 실험결과, 동제련 슬래그를 광물설 혼화재료로 혼입한 콘크리트의 굳지 않은 콘크리트 특성을 살펴보면 동제련 슬래그의 치환율이 30%까지는 유동성이 증가하였으며, 충전성이 우수한 것을 알 수 있었다. 그리고 굳은 콘크리트의 특성을 살펴보면 동제련 슬래그의 치환율이 30 %일때까지 모든 재령에서 압축강도가 증가하는 것을 확인할 수 있었다. 그러나 동제련 슬래그의 치환율이 30%를 초과하였을 때는 유동성, 충전성 및 압축강도가 감소하는 것을 확인할 수 있어 동제련 슬래그의 최적 치환율은 30 %이내가 적정할 것으로 판단된다. This study examines the properties of high-fluidity concrete after adding copper slag as a mineral admixture. For this purpose, the replacement ratio of cement to copper slag was varied to 0, 10, 20, 30, 40, and 50%. A slump flow test, reach time slump flow of 500 mm, and a U-Box and O-lot test were conducted on the fresh concrete. The compressive strength of the hardened concrete was determined at 3, 7, 14 and 28 days. According to the test results, the workability, compaction, and compressive strength of the high-fluidity concrete increased when replacing 30% of the cement with copper slag. These parameters decreased for all material ages with more than 30% copper slag, which was the optimal mixture ratio.
일라이트 미분말을 혼입한 고유동 콘크리트의 유동성 및 충전성에 관한 연구
이동운(Lee, Dong-Un),이맹교(Lee, Maeng-Gyo),박현정(Park, Hyun-Jung) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.12
본 연구에서는 고유동 콘크리트에서 일라이트 미분말을 대체한 콘크리트의 유동성과 충전성 및 압축강도 특성을 조사하기 위한 것이다. 이러한 목적으로 일라이트 미분말을 고유동 콘크리트에 5, 10, 15, 20%를 대체한 후 치환율에 따른 콘크리트의 특성을 알아보았다. 콘크리트 배합 후 굳지않은 콘크리트에서 슬럼프 플로우 시험, 500mm플로우 도달시간 및 O-lot 시험을 실시하였으며, 굳은 콘크리트의 특성으로 재령 28일에 고유동 콘크리트의 압축강도를 측정하였다. 시험결과 고유동 콘크리트의 유동성 및 충전 높이는 일라이트 미분말 10%를 대체하였을 때까지 증가하는 것으로 나타났다. 그리고 고유동 콘크리트의 압축강도 특성을 살펴본 결과에서도 일라이트 미분말 10%를 대체하였을 때까지 강도증진이 발생하였다. 따라서 본 실험결과 일라이트 미분말의 혼입율이 10%일 때 최적 치환율이 되었음을 확인할 수 있었다. This study is to be investigate properties of workability, compacting and compressive strength replaced by the illite powder in high fluidity concrete. For this purpose, illite powder has replaced the binder of high fluidity concrete of 5%, 10%, 15%, 20%. After concrete mixing, slump flow test, reach time slump flow 500mm, O-lot test were conducted on fresh high fluidity concrete. And compressive strength was determined 28 days for the hardened high fluidity concrete specimens. According to the test results, the workability, filling height of high fluidity concrete were increased in 10% replacement of illite powder. Furthermore, the compressive strength of high fluidity concrete was increased in 10% replacement of illite powder.. It was possible to confirm that optimal mixture ratio of illite powder seems to exist, and it is shown to be 10% according to our experimental results.
건축물 안전진단 정보분류체계 구축 방안에 관한 연구 - IDEF 정보 모델링 기법 및 통합건설정보 분류체계를 이용하여 -
이동운(Lee Dong-Un),이상범(Lee Sang-Bum) 대한건축학회 2004 大韓建築學會論文集 : 構造系 Vol.20 No.12
The purpose of this study is suggesting Building Safety Inspection Information Classification System by this time, exchanges of safety inspection data have been difficult, because of the absence of standard information classification system between related offices in order to solve this problems, the Ministry Construction & Transportation's standard construction information classification system and Safety inspection process are investigated with IDEF information modelling method, and then search a way to be integrate one Into another through the process, finding a integrated information classification model for safety inspection<br/> In conclusion, the suggested system is expected to provide more efficient data classification tools and consequently improve safety inspection's quality