http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
화염증 CO<sub>2</sub> Laser를 이용한 입자의 크기 및 형상 제어
이동근,이선재,최만수,Lee, Donggeun,Lee, Seonjae,Choi, Mansoo 대한기계학회 1999 大韓機械學會論文集B Vol.23 No.11
A new technique for control of size and shape of flame-made particles is Introduced. The characteristic sintering time can be controlled Independently of collision time by heating the particles with irradiation of laser because the sintering time strongly depends on temperature. A coflow oxy-hydrogen diffusion flame burner was used for $SiCl_4$ conversion to silica particle. Nanometer sized aggregates irradiated by a high power CW $CO_2$ laser beam were rapidly heated up to high temperatures and then were sintered to approach volume-equivalent spheres. The sphere collides much slower than the aggregate, which results in reduction of sizes of particles maintaining spherical shape. Light scattering of Ar ion laser and TEM observation using a local sampling device were used to confirm the above effects. When the $CO_2$ laser was irradiated at low position from the burner surface, particle generation due to gas absorption of laser beam occurred and thus scattering intensity increased with $CO_2$ laser power. At high irradiation position, scattering intensity decreased with $CO_2$ laser power and TEM image showed a clear mark of evaporation and recondensation of particles for high $CO_2$ laser power. When the laser was irradiated between the above two positions where small aggregates exist, average size of spherical particles obviously decreased to 58% of those without $CO_2$ laser irradiation with the spherical shape. Even for increased carrier gas flow rate by a factor of three, TEM photograph also revealed considerable reduction of particle size.
이동근(Donggeun Lee),주효상(Hyosang Ju),박지상(Jisang Park),길용성(Yong-Sung Kil),김상효(Sang-Hyo Kim) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.2
극부호는 우수한 복호 성능을 위해 큰 크기의 리스트 복호를 수행할 수 있지만, 필연적으로 복호 복잡도가 증가하게 된다. 이를 위하여 복호실패 시 일부 수신신호를 변형하여 재복호를 수행하는 임펄스 섭동 복호가 제안된 바 있다. 본 논문에서는 섭동 비트선정 방식에 따른 성능을 확인하고, LLR 크기에 따른 섭동 우선순위를 적용했을 때 제한된 반복 횟수 내에서 더 큰 성능이득을 가짐을 확인하였다.
차량 간 통신에서 주기적 메시지를 위한 속도 기반의 자가 구성형 시분할 브로드캐스팅 방법
이동근(Donggeun Lee),장상우(Sang-woo Chang),이상선(Sang-sun Lee) 한국통신학회 2014 韓國通信學會論文誌 Vol.39 No.3(네트워크)
차량 간 통신을 이용한 안전 서비스 제공을 위해서 차량 간에 서로의 위치정보 획득이 중요한 이슈가 되고 있다. 이를 위해서 주기적으로 메시지를 발생 시키고 주변 차량의 위치 변화를 감지하여 운전자에게 안전 서비스를 제공한다. 하지만 차량의 밀도가 높은 환경에서 주기적인 위치정보 메시지의 잦은 발생으로 인해 네트워크 채널이 포화 상태가 되어 송/수신에 문제가 발생한다. 본 논문은 시분할 슬롯을 이용하여 브로드캐스팅하며 차량의 속도를 이용하여 도로 위 차량 밀도를 예측하여 시분할 슬롯의 수, 전파세기를 조절하여 향상된 통신 상태를 만드는 방법을 제안한다. 네트워크 시뮬레이터를 통한 성능 평가 결과, 기존의 경쟁 모드에서 브로드캐스팅 했을 때 보다 수신율은 약 40%의 향상 보여주었고 채널 접근 시간은 10ms에서 0.23ms 로 감소한 것을 확인 할 수 있었다. For vehicle safety-related services using wireless communications, reliable collection of various driving informations transmitted periodically by neighbor vehicles is the most important. Every host vehicle analyses them to estimate a potential dangerous situation in a very short time and warns drivers to prevent an accident. However tremendous amount of periodic messages can cause the wireless communication in chaos and the services not in safe. In this paper, we propose a time-division broadcasting protocol to mitigate the communication congestion. It utilizes the received information of vehicle velocity and location, i.e. vehicle traffic density on a road to adjust the number of time slots in a given broadcasting period, and transmission power. The simulation results show that message reception ratio is changed to approximately 40% and channel access time also decreased from 10ms to 0.23ms.