http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이덕수,성굉모,Lee Duck-Soo,Sung Keong-Mo 한국음향학회 1989 韓國音響學會誌 Vol.8 No.5
본 논문에서는 비선헝 왜곡법을 사용하여 악기음을 합성하였다. 비선형 왜곡법은 기본적으로 하나의 정현파 발생기와 이에 의해 발생된 정현파에 인위적인 왜곡을 일으키는 증폭기로 구성된다. 출력파는 비선형 증폭기의 전달함수, 즉 파형 형성 항수를 변화시킴으로써 제어되는 배음을 갖는다. 파형 형성 함수는 녹음된 악기음을 분석하여 얻어진 각 부분음 크기를 바탕으로 체비세프 다항식을 이용하여 얻어진다. 합성 시스템은 IBM-PC에서 수행되는 프로그램이며, 합성 결과는 파형과 스펙트럼 분석기에 의한 스펙트럼으로 보였다. 또한 합성 결과의 검증을 위해 전문가를 대상으로 시청 테스트를 수행하여, 합성음의 만족도를 평가하였다. In this paper, musical tone, especially instrument tones are synthesized using nonlinear distortion technique. Nonlinear distortion is very simple but versatile method when you synthesize musical instrument tones. It basically consists of one sine oscillator and amplifier which makes distortion to Input wave. Output wave has many harmonics that can be controlled by varying shaping function, which is the transfer function of nonlinear amplifier. Shaping function Is obtained from the analyzed harmonic amplitude data. Given harmonics amplitudes, Chebyshev polynomial is used to produce the shaping function that exactly makes the given harmonics at steady state. We contructed non -real time nonlinear distortion synthesizer program running at IBM-PC. To quantify the satis faction of synthesised tones, listening test is carried out, and the result is presented.
직류 지락전류 크기 및 보호를 고려한 LVDC 배전계통의 중성점 고저항 접지 설계
이종현(Jong-Hyun Lee),이덕수(Duck-Su Lee),이승용(Seong-Yong Lee),김수남(Soo-Nam Kim) 대한전기학회 2021 대한전기학회 학술대회 논문집 Vol.2021 No.10
최근 신재생 에너지, 데이터센터, 전기자동차 급속충전기 및 상업용 빌딩에도 직류배전 시스템이 적용되는 사례가 증가하고 있으나 직류배전에 대한 설계, 계통접지 방식, 보호협조 구성 등에 대해서는 아직 세부적인 적용 방안이 정립되지 않아 지속적인 연구 및 실증이 필요한 상황이다. IEC 60364-1 에서는 교류 시스템과 같이 직류 시스템도 접지 방식에 따라 TT, TN(TN-C, TN-S, TN-C-S), IT 시스템으로 구분하고 있으나 직류시스템 계통접지의 세부적인 특징에 대해서 자세한 설명은 없다. 본 논문에서는 직류 시스템 접지방식 중 특히 중성점 고저항 접지방식의 특징 및 설계방안에 대한 내용을 정리하고자 한다.
최기열(Choi Ki Yeol),이덕수(Lee Duck Soo),박문빈(Park Moon Bin),김희택(Kim Hee Taek),장기풍(Chang Ki Poong) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
Current transformers(CTs) whose rating is selected per a full load current of a feeder in high voltage system can be easily saturated due to high fault current that may be several hundred times of the full load current of the feeder. However, the protective relay shall operate properly at the fault without mis-operation under the CT saturation. So, in selecting the CT rating, it is necessary to consider the behaviour of CT and a performance of protection scheme in condition where CT can be saturated. In this paper, a performance of CT and a degree of saturation are studied and verified whether its ratings are proper for the operation of the protective relay.