http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤동기,박양하,김관호,이영철 한국통신학회 1999 韓國通信學會論文誌 Vol.24 No.7
본 논문에서는 2.45GHz 비접촉식 마이크로파 무선인식시스템을 개발하고 특성을 분석하였다. 응답기와 질문기 사이에 9,600bps 전송속도로 데이터 인식을 통하여 통신절차와 에러검출 보정방식 및 송.수신회로 범용소자를 이용하여 설계.제작하였고, 송.수신안테나와 응답기 전원제어를 위한 제어 프로토콜을 추가하여 시스템의 신뢰성을 향상시켰다. 실험결과, 응답기는 3.6V의 전원 공급시 15$\mu\textrm{A}$의 저전류 소모를 보였으며 최대, 80km/h의 이동속도에 대한 데이터 전송 성공률은 초대 인식거리 10m에서 90%이상의 결과를 얻었다. In this paper, we have developed and analyzed the 2.45GHz microwave RFID system. Which is composed tag and interrogator using custom IC, and we have made the software driving the hardware for the bidirectional data transmission method. Using 3.6V power supply was used, the optimal identification range in the information transmission of the designed microwave RFID system operating at 9,600bps was l0m. In the control circuit of the tag, the low current consumption of 15$mutextrm{A}$ and the tag data transmission rate of 90% when the moving velocity was 80km/h.
이중편파와 FSS를 적용한 정류안테나의 변환효율 분석에 관한 연구
윤동기,박양하,김관호,이영철 한국전자파학회 1999 한국전자파학회논문지 Vol.10 No.5
본 논문에서는 2뾰GHz 이중편파 정류안테나를 설계. 제작하고 제작된 정류안테나의 방향변화에 따른 마이크로파-DC 변환효율 특성과 FSS(Frequency Selective Surface)를 적용하여 정류안테나의 정류회로에서 발 생되는 고조파 성분(Harmonics)의 감소 특성을 분석하였다. 본 논문에서 설계. 제작된 각각의 이중편파 정류안테나의 마이크로파 DC 변환효율을 측정한 결과 다이폴 형태는 $360\Omega$의 부하일 때 69.1 %. 패치 형태는 $340\Omega$일 때 75.4 %의 최대 변환효율 특성을 나타내었다. 각 각 최적의 부하 저항을 가칠 때 $0~180^{\circ}$방향 변화에 따른 RF-DC 변환효율 변동특성은 다이폴 형태는 $\pm20%$, 패치 형태는 $\pm5%$를 나타내었다 FSS를 적용했을 때 통과대역에서의 손실은 1 dB이하, 차단대역에서의 감쇄는 20 dB 이상이 되었고‘ 정류안테나의 마이크로파-DC 변환효율은 $\pm2%$정도 변화되어 양호한 특성을 나타내었다. In this paper, we analyzed microwave-DC conversion efficiency for the dual-polarization rectenna and antenna position changing. And then we analyzed and applied Square-Loop FSS structure for reducing the diode harmonic components as a rectifying circuit. The results of microwave-DC conversion efficiency for the each of designed dual-polarization rectenna has 69.1% with $360\Omega$ (dipole type) and 75.4% with $340\Omega$ (patch type) optimum load resistor. When the each of dual-polarization rectenna has a optimal load resistor, it's conversion efficiency shows of $\pm$20% in dipole type and $\pm$5% in patch type at $0~180^{\circ}$position. When applied Square-Loop FSS structure for Rectenna, Insertion loss was under 1 dB as the passband and over 20 dB as the stopband. The microwave -DC conversion efficiency was represented good properties of $\pm$2% variation.