http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
조인기 ( In Ky Cho ),김래영 ( Rae Yeong Kim ),고광범 ( Kwang Beom Ko ),유영준 ( Young June You ) 한국지구물리·물리탐사학회 2014 지구물리와 물리탐사 Vol.17 No.3
전자 탐사는 신호원의 파형에 따라 주파수 영역과 시간 영역법으로 나누어진다. 주파수 영역과 시간 영역은 수학적으로 Fourier 변환 관계에 있으므로, 주파수 영역 자료를 Fourier 변환하여 시간 영역 자료를 얻어낼 수 있다. 즉, 시간영역 전자 탐사의 모델링 자료는 주파수 영역에서 수행한 모델링 자료의 적절한 변환을 통해 얻어질 수 있다. 따라서 주파수-시간 영역 변환은 전자 탐사에서 매우 중요한 부분이다. 분산 전개법(DEM)은 신속하고 효과적인 주파수-시간 영역변환 기법 중의 하나이다. 분산 전개법에서는 전자기장은 분산 함수와 분산 시간의 급수로 전개하며, 분산 시간은 주어진 주파수 자료에 의해 결정된다. 특히 적정 분산 시간의 설정은 분산 전개법의 정확성을 결정하는 주요 요소이다. 이 연구에서는 급수 전개에 의해 얻어진 주파수 영역 자료의 오차를 최소화하는 방법을 사용하여 적정 분산 시간의 설정 방법을 개발하였다. 반무한 공간 및 2층 구조 모델에 대하여 이 방법을 적용한 결과, 분산 전개법은 상당히 넓은 시간 대역에서 정확한 결과를 나타냄을 확인하였다. Electromagnetic (EM) methods are generally divided into frequency-domain EM (FDEM) and time-domain EM(TDEM) methods, depending on the source waveform. The FDEM and TDEM fields are mathematically related by the Fourier transformation, and the TDEM field can thus be obtained as the Fourier transformation of FDEM data. Formodeling in time-domain, we can use fast frequency-domain modeling codes and then convert the results to the time domain with a suitable numerical method. Thus, frequency-to-time transformations are of interest to EM methods, which is generally attained through fast Fourier transform. However, faster frequency-to-time transformation is required for the3D inversion of TDEM data or for the processing of vast air-borne TDEM data. The diffusion expansion method (DEM)is one of smart frequency-to-time transformation methods. In DEM, the EM field is expanded into a sequence of diffusion functions with a known frequency dependence, but with unknown diffusion-times that must be chosen based on the data to be transformed. Especially, accuracy of DEM is sensitive to the diffusion-time. In this study, we developed a method to determine the optimum range of diffusion-time values, minimizing the RMS error of the frequency-domain data approximated by the diffusion expansion. We confirmed that this method produces accurate results over a wider time range for a homogeneous half-space and two-layered model.
저위도 캄보디아 스퉁트렝 지역의 항공자력탐사 자료처리 및 해석
신은주 ( Eun Ju Shin ),고광범 ( Kwang Beom Ko ),유영준 ( Young June You ),정연호 ( Yeon Ho Jung ) 한국지구물리·물리탐사학회 2012 지구물리와 물리탐사 Vol.15 No.3
본 연구는 캄보디아 스퉁트렝 지역의 항공자력탐사 자료처리 및 해석에 관한 사례 연구이다. 자료처리 및 해석 에는 다음의 세 가지 관점에 중점을 두었다. 첫째, 저위도 지역 자력자료의 자기극변환 시 문제가 되는 편각방향의 영상 왜곡을 고찰하고 이를 최소화하기 위한 여러 방법을 검토함으로써 최선의 결과를 도출하는 방안을 모색하였다. 둘째, 조 사지역은 사전정보가 거의 없기 때문에 전통적인 자료처리 기법과 함께 geographic information system (GIS) 분야의 경 사, 곡률 및 최대 경사면 방위각 등의 기법을 새로이 도입, 검토하였다. 이로부터 조사지역의 구조지질 정보를 도출하고 그 유용성을 확인하였다. 마지막으로, 오일러 곱풀기를 이용하여 자력이상대의 심도정보를 도출하고 앞서의 고찰결과와 종합하여 향후의 정밀 조사영역을 선정, 추천하였다. 본 연구에서 수행한 일련의 자료처리 과정은 국내는 물론 해외 자 원개발에 있어서 적절한 지침이 될 수 있을 것으로 여겨진다. In this case study, we present the various and consistent processing techniques for the reasonable interpretation of aeromagnetic data. In the processing stage, we especially focused on the three major respects. First, in the low latitude area, severe artifacts are occurred as a result of reduction to the pole technique. To overcome this problem, variable alternative methods were investigated. From the comparison of each technique, we concluded that energy balancing method gives more fruitful result. Second, because of limited a priori information, it is nearly impossible to employ detailed geological survey due to wide and thick spreading of soils in the survey area. So we especially investigated the new techniques such as extracting slope, curvature and aspect information mainly used in GIS field as well as conventional methods. Finally, by using the Euler deconvolution, we extracted the depth information on the magnetic anomalous body. From the synthetic analysis between depth information and previous discussed results, the detailed future survey area was proposed. We think that a series of processing techniques discussed in this study may perform an important role in the domestic and abroad resource development project as a useful guideline.
3차원 전기비저항 역산 방법을 이용한 삼보 광산에서 금광 탐사
박종오 ( Jong Oh Park ),김희준 ( Hee Joon Kim ),송무영 ( Moo Young Song ),유영준 ( Young June You ) 대한지질공학회 2005 지질공학 Vol.15 No.1
전라남도 무안군 해제면에 위치한 삼보광산은 편마암류 및 유문암 내에 발달한 열극에 열수가 충전하여 형성된 열극충전광산이다. 시추 자료에서 얻은 분석 품위는 금이 0.05~10.9 g/t 이하, 은이 0.05~389 g/t 이하로 부분적으로 금·은광화작용이 인지되었다. 본 연구는 지표에서의 쌍극자, 슐럼버저 및 웨너 배열을 이용한 전기비저항 탐사와 시추공에서의 전기비저항 토모그래피 탐사를 복합하여 삼보광산에서 광화대의 분포 및 이와 관련된 지질구조를 파악하고자 한다. 3차원 전기비저항 역산의 결과는 광화대가 지표부터 약 80m 심도까지 30m의 폭을 가지며, N10°~20°E의 방향으로 240m 연장되어 있음을 보여준다. 전기비저항 영상에서 얻어진 1,000ohm-m 이하의 전기비저항 값은 시추 자료에서 확인된 금·은광화작용이 인지된 구간 및 연약대 구간과 거의 일치하였다. The Sambo mine is located in Hae-je Myeon, Moo-an Gun, Chollanamdo, which consists of host gneiss and rhyolite possessing quartzite veins with other compositions such as gold, silver, and sublimated sulfur. The ore grade estimated from the core was 0.05~10.9g/t or less in gold and 0.05~389g/t or less in silver, indicating a partial mineralization. The purpose of this paper is to understand the subsurface structures and the distribution of mineralized bodies in the Sambo mine using a combined method of Schlumberger, Wenner, and Dipole-dipole resistivity surveys on the surface and the resistivity tomography survey in boreholes. The result of three-dimensional resistivity inversion showed that the mineralized body is extended to 240m long in the N10°~20°E direction, with 30m wide and 80 m thick from the surface. The low resistivity zones (<1,000ohm-m) determined from the resistivity image were in good agreement with the mineralized bodies and weak zones identified from the logged cores.