http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유명호(Myung-Ho Yoo),이택성(Taek-Sung Lee),권종호(Jong-Ho Kwon) Korean Society for Precision Engineering 2006 한국정밀공학회지 Vol.23 No.12
Seals are usually made from elastomer, a kind of rubber, and it has the non-linearity and hyper-elasticity. U-type seals are used to prevent the leakage of internal fluid sealed in hydraulic actuator because they have more excellent performance than O-rings or rectangular seals. As a core part of hydraulic actuator, U-type seal gives much effect on performance and reliability of actuator. This study considers an NBR U-type seal under high pressure of a hydraulic actuator, and provides its deformation, stress-strain characteristic and contact force using the non-linear finite element analysis. Analysis results are compared with the experimental ones performed by the self-developed testing equipment. Verification result shows that this study presents a good application process for the effective design of U-type seals under high operation pressure.
Nitrile Butadiene Rubber의 비선형성에 대한 실험적 연구
유명호 ( Myung Ho Yoo ),이택성 ( Taek Sung Lee ),도제성 ( Je Sung Do ),권종호 ( Jong Ho Kwon ) 한국고무학회 2007 엘라스토머 및 콤포지트 Vol.42 No.3
산업기계에서 공기압 또는 유압용 액추에이터(actuator)가 넓이 사용되는데 액추에이터의 중요 부품으로 탄성중합체로 만들어진 시일을 사용한다. 우수한 밀봉특성을 요구하는 시일의 재료로 내유성과 내마모성이 비교적 우수한 NBR(nitrile butadiene rubber) 재료가 가장 많이 사용한다. 산업기계의 액추에이터는 적용환경에 따라 낮거나 혹은 높은 온도에서 사용되는데 여러 온도에서 NBR은 그에 따른 특성이 다르게 나타난다. 본 연구에서는 새롭게 만들어지고 있는 재료 중 공기압, 유압용 시일(Seal)재료로 사용하는 Hs70, 80, 90등 3종의 NBR을 각각 -10℃, 20℃, 80℃, 100℃온도에서 소재의 비선형(nonlinear) 특성의 시험과 유한요소해석에 필요한 재료상수를 알아보고 각각의 온도에서 하중 반복조건에 따른 소성변형 경향을 살펴보았다. Hydraulic actuators are used widely for industrial machinery. The seal made from elastomer is used as a core part of the actuator, NBR (nitrile butadiene rubber) materials with high quality of oil resistance and abrasion resistance is used widely, requiring excellent characteristic of sealing. According to applied circumstances, the actuators for industrial machinery are used under different temperature situations. In this study, three different kinds of NBR, which is Hs70, 80, 90 are determined as one of hydraulic materials. An experimental investigation is performed to confirm the non-linearity under different temperature (-10℃, 20℃, 80℃ 100℃) situation, material constants for finite element analysis and plastic deformation in accordance with Load-unload
유명호(Myung-Ho Yoo),이택성(Taek-Sung Lee) Korean Society for Precision Engineering 2009 한국정밀공학회지 Vol.26 No.11
A lip seal is widely used not only to prevent leakage of fluids from an actuator or a rotating shaft but also to exclude outside substances. Recently, TPU(Thermoplastic Polyurethane), which is one of the sealing materials, has been frequently used due to its excellent mechanical properties and wear resistance. The material constants for finite element analysis through the experiment on stress relaxation are presented. The reaction forces of a shaft as well as the contact pressures of a lip seal under condition before and after stress relaxation using finite element analysis were obtained, The results show that stress relaxation has not a little effect on the performance of a lip seal.
김건완(Gun Wan Kim),유명호(Myung Ho Yoo),이택성(Taek Sung Lee) Korean Society for Precision Engineering 2013 한국정밀공학회지 Vol.30 No.8
Micro-dimples on sliding surfaces have been investigated to reduce the frictional forces on metal bearing surfaces; however, for an elastomer, such as thermoplastic polyurethane (TPU), this has not been studied. The material properties of an elastomer are affected by temperature, and this can shorten the life of the elastomer. In this paper, micro-dimples were applied on the surface of an elastomer in order to reduce the frictional heating, which was experimentally investigated using pin-on-disk apparatus while the surface temperature was measured. To obtain optimal design parameters, the design of the experiment was applied, and the shape of the section, size, depth and density of micro-dimples were selected as the design parameters. The results show that the size of the dimple is the most important design parameter.
윤동수(Dong-Soo Yoon),명근식(Keun-Sik Myung),유명호(Myung-Ho Yoo),백두현(Doo-Hyun Baek),임종열(Jong-Ryeal Im),김양상(Yang-Sang Kim),조흥상(Heung-Sang Cho) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
지중설비는 산재되어 있고 지중에 매설되어 있어 정확한 위치를 육안으로 확인이 불가 할 뿐만 아니라, 현장에서 정확한 설비정보(제원 등) 확인이 불가함. 또한, 굴착개소 입회업무 수행시 굴착위치(설비, 지번 등) 찾기 및 긴급상황 발생시 최단거리(시간) 접근 경로 파악이 곤란하고, 순시자의 자의적인 순시경로 선정으로 순시 사각지대 발생 우려가 있음. 따라서, 지중에 매설된 지중 송배전설비의 정확한 경과지 및 위치, 현황정보 확인이 가능한 시스템을 개발하여 굴착 등에 의한 외상고장 발생을 사전에 방지함으로써 손실비용 최소화 및 효율적인 지중설비의 운영으로 전기공급 신뢰도를 향상하고자함.
윤동수(Dong-Soo Yoon),명근식(Keun-Sik Myung),유명호(Myong-Ho Yoo),백두현(Doo-Hyun Baek),김경호(Kyung-Ho Kim),임종열(Jong-Ryeal Im),한통근(Tong-Keun Han),조흥상(Heung-Sang Cho) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
주로 산악지대에 설치되어 있는 가공송전설비 순시 및 점검업무 수행시 또는 설비고장 발생 등 유사시 해당 설비위치로 신속히 이동하기 위하여 상용 Navigation에 가공송전설비를 표시하여 활용함으로써 업무의 효율성 및 전기공급 신뢰도를 향상하는데 목적이 있다.