http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
알칼리 활성화 반응에 의한 경량골재 콘크리트의 실험적 연구
위준우(We Joon-Woo),사순헌(Sa Soon-Heon),김상헌(Kim Sang-Heon),지석원(Ji Suk-Won),최수경(Choi Soo-Kyung),서치호(Seo Chee-Ho) 대한건축학회 2009 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.29 No.1(구조계)
In this study, Blast Furnaced Slag was used as a substitute. Alkali-activated admixture was added for hardening concrete by chemical reaction. As analysing the compressive strength and the durability of light-weight aggregate concrete with BFS and Alkali-activated admixture, the fundamental data for application of light-weight aggregate concrete is considered to be offered. For the purpose, the proportion for the experiment was planned as 10%, 20% of Metakaolin(MK) replacement to binder by weight and admixed 6%, 8%, 10%, 12%, 14% of activator by binder weight in each proportion. As a result of the experiment, the proportion of non-MK(MK 0%) with 8% of Ca(OH)₂ at the age of 3, 7 days and with 12% of Ca(OH)₂ at the age of 2 weeks appeared the highest compressive strength, but it was lower than the strength of Plain batch. It is considered that late hydrate reaction of Blast Furnaced Slag(BFS) could effect to the early-age strength, on the other hand, the strength development appears by latent hydraulicity.
알칼리 활성화 반응에 의한 고로슬래그 경량골재 콘크리트의 실험적 연구
위준우(We Joon-Woo),김세환(Kim Se-Hwan),김상헌(Kim Sang-Heon),지석원(Ji Suk-Won),최수경(Choi Su-Kyeong),서치호(Seo Chee-Ho) 대한건축학회 2010 大韓建築學會論文集 : 構造系 Vol.26 No.9
In this study, the strength characteristic of lightweight aggregate concrete made of BFS hardening by chemical reaction of alkali activate admixture was analysed and the results are as below. Air content and slump value appeared decrease by increasing the amount of alkali activate admixture and replacement of Meta Kaolin(MK). It is considered that the decrease is because of increase of the binder granular amount and high fineness of MK. Proportion design by replacement ratio of alkali activate admixture needs more studies for improving workability. The compressive strength was measured over 28MPa at age 28days when 0%, 10%, 20% of MK replacement. This confirms the possibility of use of alkali-activated lightweight concrete as lightweight concrete. And as MK reacted with more amount of alkali activate admixture than BFS, the optimum mix proportion of alkali activate admixture needs to be established for improving compressive strength.
복합구조 댐퍼를 적용한 고 감쇠 폴리머 콘크리트의 진동 특성에 관한 연구
김정진,최경석,위준우,석원균 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 논문집 Vol.24 No.5
In the case of a concrete structure, vibration problems occur under various conditions because of its low damping performance. To solve this problem, a study on the high damping performance of the polymer concrete with hybrid damper has recently been increased. Since water is not used in polymer concrete, the curing time is short. Also, the physical properties and dynamic properties of polymer concrete are quite excellent. So polymer concrete is widely expected to be used for structural materials. The hybrid damper is the structural system that consists of steel balls and viscous fluid inside the pipe which is embedded in polymer concrete. It can reduce the structural vibrations through the energy dissipation mechanism of viscous fluid and steel balls. In this study, the physical and dynamic properties of polymer concrete with hybrid damper were compared with ordinary concrete. As a result, the elasticity coefficient and the strength of the polymer concrete with hybrid damper were so much excellent. In particular, the tensile strength was 6.5 to 10 times higher than ordinary concrete. The frequency response function and damping ratio were also compared. As a result, the dynamic Stiffness of the polymer concrete was 25% greater than that of ordinary concrete. The damping ratio of the polymer concrete was approximately 3 times higher than that of ordinary concrete. Although the dynamic stiffness of the hybrid damper showed similar tendency, the damping ratio was 3.5 times higher than that of ordinary concrete. Therefore, the polymer concrete with hybrid damper was superior to ordinary concrete. 구조물을 구성하고 있는 콘크리트의 경우, 진동에 대한 감쇠성능이 작아, 구조물에서 발생하는 다양한 진동 문제를 해결하는데 어려움이 있으므로, 이러한 문제를 해결하기 위해, 최근 폴리머 콘크리트와 복합구조 댐퍼를 혼합하여 댐핑 성능을 크게 증가시킨 고 감쇠 시스템에 대한 연구가 활발히 진행되고 있다. 한편, 폴리머 콘크리트는 배합 시, 시멘트와 물을 사용하지 않아, 경화시간이 매우 짧고, 물리적 특성 및 동특성 등이 매우 우수하여 진동저감이 요구되는 건축구조물에의 폭넓은 활용이 기대되는 구조재료이며, 복합구조 댐퍼는 파이프 관 내부에 위치한 쇠구슬의 충돌에 따른 운동에너지 소산과 점성유체의 에너지 소산 방식을 통해 진동을 저감하는 구조시스템이라 할 수 있다. 본 연구에서는 폴리머 콘크리트와 복합구조 댐퍼의 물리적, 동적 특성을 일반 콘크리트와 비교하였는데, 물리적 특성의 경우, 폴리머 콘크리트가 탄성계수 및 강도 특성에서 상당히 우수한 결과를 보였으며, 특히 인장강도는 6.5~10배 이상 큰 차이를 보였다. 또한, 동적 특성의 경우도 폴리머 콘크리트는 일반 콘크리트 대비 동적강성은 25%, 감쇠비는 약 3배 정도 증가하였으며, 복합구조 댐퍼는 동적강성은 비슷한 경향을 보였지만 감쇠비는 3.5배 이상 증가하여, 일반 콘크리트보다 진동 감쇠성능이 우수한 것으로 나타났다.
건축 재료 활용을 위한 진공함침 PCM재의 물리ㆍ화학적 특성
박상진,강승민,박솔아,송명신,위준우,장성훈 한국공업화학회 2014 한국공업화학회 연구논문 초록집 Vol.2014 No.1
온돌 바닥 난방 구조에서의 에너지 효율 향상을 위한 방법으로 상변화 물질(PCM)의 잠열 특성을 이용할 수 있다. 이러한 PCM은 일정 온도에서 고체에서 액체, 액체에서 기체 혹은 그 반대로의 상 변화에 따라 열을 흡수 및 방출하여 잠열 또는 열조절 기능을 하는 물질이다. 본 연구에서는 이러한 잠열 특성을 가지는 PCM의 온돌 바닥구조 적용을 위하여 진공 함침법에 의한 PCM 첨가제를 제조하고, 이의 물리ㆍ화학적인 특성을 조사하였다. 본 연구에서 선택한 PCM은 hexa-decane을 선택하였고, 바닥재로의 안정적인 적용과 대량 생산에 대한 효율이 높은 진공 함침법을 선택하였다. 진공 함침된 PCM의 성능 평가는 FT-IR, DSC, SEM 분석을 실시하여 진공 함침된 PCM의 물리ㆍ화학적 구조와 온도에 따른 열량을 분석함으로써 바닥 난방구조용 건축 재료로의 적용 가능성을 검토하였다.