http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마이크로버블 오존 산화제와 공압파쇄 장치를 연계 적용한 지중 화학적 산화법의 정화효율 평가
오승택,오참뜻,김국진,석소희,김철경,임진환,유재봉,장윤영,Oh, Seung-Taek,Oh, Cham-Teut,Kim, Guk-Jin,Seok, So-Hee,Kim, Chul-Kyung,Lim, Jin-Hwan,Ryu, Jae-Bong,Chang, Yoon-Young 한국지하수토양환경학회 2012 지하수토양환경 Vol.17 No.4
A new type of chemical oxidation technology utilizing micro bubble ozone oxidizer and a pneumatic fracturing equipment was developed to enhance field applicability of a traditional chemical oxidation technology using hydrogen peroxide as an oxidizer for in-situ soil remediation. To find an efficient way to dissolve gaseous ozone into hydrogen peroxide, ozone was injected into water as micro bubble form then dissolved ozone concentration and its duration time were measured compared to those of simple aeration of gaseous ozone. As a result, dissolved ozone concentration in water increased by 31% (1.6 ppm ${\rightarrow}$ 2.1 ppm) and elapsed time for which maximum ozone concentration decreased by half lengthened from 9 min to 33 min. When the developed pneumatic fracturing technology was applied in sandy loam, cracks were developed and grown in soil for 5~30 seconds so that the radius of influence got longer by 71% from 392 cm to 671 cm. The remediation system using the micro bubble ozone oxidizer and the pneumatic fracturing equipment for field application was made and demonstrated its remediation efficiency at petroleum contaminated site. The system showed enhanced remediation capacity than the traditional chemical oxidation technology using hydrogen peroxide with reduced remediation time by about 33%.
원형에너지가 추가된 p-Snake를 이용한 윤곽선 추출 기법
오승택(Seung-Taek Oh),전병환(Byung-Hwan Jun) 대한전자공학회 2014 전자공학회논문지 Vol.51 No.4
임의의 물체 영상에서 정확한 윤곽선을 찾아내는 것은 영상 처리 관련 시스템을 구축하는데 있어 필수적인 요소이다. 특히, 자동화된 생산 공정에서 생산품의 검사를 위한 비전시스템을 구축하다면 직선, 원 등의 정형화된 모형에 대한 윤곽선의 검출이 매우 중요하다. 본 논문에서는 원형(prototype) 에너지를 추가하여 개선된 윤곽선 추출 알고리즘으로 원형적응 동적윤곽선 모델, p-Snake를 제안한다. 제안 방법은 원형분석을 위하여 물체 영상에 소벨 연산을 수행한 후, 기존 스네이크 알고리즘을 적용하여 초기 윤곽선을 찾는다. 이후 초기 윤곽선 정보에 근거하여 직선, 원 등의 원형(prototype)을 분석하고, 원형 에너지를 정의하여 기존의 스네이크 함수에 추가적인 에너지 항목으로 사용함으로써 물체의 최종 윤곽선을 검출하였다. 산업현장의 배경을 가정한 환경에서 취득된 340장의 영상에 대하여 실험한 결과, 잡음이나 조명 등의 이유로 물체와 배경의 구분이 선명하지 않거나 영상에서 에지가 충분히 존재하지 않는 경우에도 윤곽선을 추출할 수 있음을 확인할 수 있었다. 또한 원형(prototype)과 얼마나 일치하는 가를 나타내는 척도인 유사도의 경우, 제안한 p-ACM으로 추출한 윤곽선의 원형 유사도가 ACM의 처리 결과에 비해 9.85%가량 우수한 것으로 나타났다. It is an essential element for the establishment of image processing related systems to find the exact contour from the image of an arbitrary object. In particular, if a vision system is established to inspect the products in the automated production process, it is very important to detect the contours for standardized shapes such lines and curves. In this paper, we propose a prototype adaptive dynamic contour model, p-Snake with improved contour extraction algorithms by adding the prototype energy. The proposed method is to find the initial contour by applying the existing Snake algorithm after Sobel operation is performed for prototype analysis. Next, the final contour of the object is detected by analyzing prototypes such as lines and circles, defining prototype energy and using it as an additional energy item in the existing Snake function on the basis of information on initial contour. We performed experiments on 340 images obtained by using an environment that duplicated the background of an industrial site. It was found that even if objects are not clearly distinguished from the background due to noise and lighting or the edges being insufficiently visible in the images, the contour can be extracted. In addition, in the case of similarity which is the measure representing how much it matches the prototype, the prototype similarity of contour extracted from the proposed p-ACM is superior to that of ACM by 9.85%.
p-Snake의 성능 향상을 위한 적응 원형 생성 기법
오승택(Oh, Seung-Teak),전병환(Jun, Byung-Hwan) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.4
p-Snake는 기존의 동적윤곽모델(Active Contour Model)에 원형에너지를 추가로 적용한 에너지 최소화 알고리즘으로 에지 정보가 명확하지 않은 영역에서의 윤곽선 추출을 위해 사용된 방법이다. 본 논문에서는 원과 직선 프리미티브(primitive) 의 조합으로 표현되는 가변 원형(prototype)과 퍼지 함수를 적용한 원형에너지장의 생성 기법을 제안하여 p-Snake의 윤곽선 추출 성능을 개선하였다. 제안 방법은 입력된 부품 코드를 기반으로 원형을 정의하고 전처리 과정을 통해 구해진 각 프리미 티브 구간에서 대략적인 초기 윤곽을 검출한 후, 프리미티브들이 가변적으로 적응하여 원형을 생성하고 여기에 원형과의 거리에 따른 윤곽 확률을 퍼지 함수를 통해 계산하여 원형에너지 장을 생성하였다. 이를 p-Snake에 적용하여 다양한 소형 부품들을 대상으로 준비한 200장의 영상에서 윤곽선을 검출하고, 원형과의 유사도를 비교한 결과 적응 원형을 사용한 p-Snake가 기존의 Snake에 비해 약 4.6% 가량 우수함을 보였다. p-Snake is an energy minimizing algorithm that applies an additional prototype energy to the existing Active Contour Model and is used to extract the contour line in the area where the edge information is unclear. In this paper suggested the creation of a prototype energy field that applies a variable prototype expressed as a combination of circle and straight line primitives, and a fudge function, to improve p-Snake’s contour extraction performance. The prototype was defined based on the parts codes entered and the appropriate initial contour was extracted in each primitive zones acquired from the pre-processing process. Then, the primitives variably adjusted to create the prototype and the contour probability based on the distance to the prototype was calculated through the fuzzy function to create the prototype energy field. This was applied to p-Snake to extract the contour from 100 images acquired from various small parts and compared its similarity with the prototype to find that p-Snake made with the adaptive prototype was about 4.6% more precise than the existing Snake method.
연축전지와 리튬이온전지용 하이브리드 BMS 알고리즘 개발
오승택(Oh, Seung-Teak),김병기(Kim, Byung-Ki),박재범(Park, Jaebeom),노대석(Rho Dae-Seok) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.5
현재 대부분의 도서지역에서는 태양광발전을 효율적으로 운용하기 위하여 대용량 연축전지가 많이 사용되고 있지만, 풍력발전의 도입, 축전지 교체로 인하여 리튬이온전지의 도입이 증가하고 있다. 따라서 본 논문에서는 기존에 많이 보급되어 사용되고 있는 연축전지와 리튬이온전지의 장점을 최대한 활용하기 위하여, 연축전지와 리튬이온전지용 하이브리드 BMS 알고리즘을 제시하였다. 즉, 각 전지의 충전상태(state of charge, SOC)를 평가하는 알고리즘과 각 전지의 도입비용과 운용비 용에 따른 최적 구성비를 산출하는 하이브리드 운용 알고리즘을 제안하였다. 상기의 알고리즘을 이용하여 다양한 시뮬레이 션을 수행한 결과, 기존의 충전상태 평가 방법보다 오차율이 개선되어 정확한 충전상태에 대한 결과가 산출되었고, 각 전지의 도입비용과 운용비용이 최소화되는 조건에서 최적구성비를 구하여, 본 논문에서 제안한 하이브리드 BMS 알고리즘의 유용성을 확인하였다. Recently, the large scaled lead-acid battery is widely introduced to efficient operation of the photovoltaic system in many islands. but the demand of lithium-ion battery is getting increased by the operation of wind power and replacement of the lead-acid battery. And also, under the renewable portfolio standard(RPS) and energy efficiency resource standard(EERS) policy of Korea government, the introduction of energy storage system(ESS) has been actively increased. Therefore, this paper presents the operation algorithm of hybrid battery management system(BMS) using the lead-acid and lithium-ion batteries, in order to maximize advantage of each battery. In other words, this paper proposed the algorithm of state of charge(SOC) and hybrid operation algorithm to calculate the optimal composition rate considering the fixed cost and operation cost of each battery. From the simulation results, it is confirmed that the proposed algorithms are an effective tool to evaluate SOC and to optimally operate hybrid ESS.